Package: 464xlat
Version: 12
Depends: libc, kmod-nat46, ip
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 4376
Filename: 464xlat_12_mipsel_mips32.ipk
Size: 5171
SHA256sum:b548ee5914f14717808500250ed4366c5c95deddbf1aeafffb73903f6603553e
Description:  464xlat provides support to deploy limited IPv4 access services to mobile
 and wireline IPv6-only edge networks without encapsulation (RFC6877)

Package: 6in4
Version: 26
Depends: libc, kmod-sit, uclient-fetch
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 1699
Filename: 6in4_26_all.ipk
Size: 2496
SHA256sum:21ece8c367aeed6a057632f82f3e2202cb8e4288db262703aa4df3d0bbb1a674
Description:  Provides support for 6in4 tunnels in /etc/config/network.
 Refer to http://wiki.openwrt.org/doc/uci/network for
 configuration details.

Package: 6rd
Version: 10
Depends: libc, kmod-sit
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 3092
Filename: 6rd_10_all.ipk
Size: 3848
SHA256sum:d887e631e4dcae20935e0758edea5a3f93304bc238787a171e27f342ec213672
Description:  Provides support for 6rd tunnels in /etc/config/network.
 Refer to http://wiki.openwrt.org/doc/uci/network for
 configuration details.

Package: 6to4
Version: 13
Depends: libc, kmod-sit
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 1038
Filename: 6to4_13_all.ipk
Size: 1833
SHA256sum:b011846c7b022b53cf9b747014d4a3711305bbbcb456487f5e903570363f5ec3
Description:  Provides support for 6to4 tunnels in /etc/config/network.
 Refer to https://openwrt.org/docs/guide-user/base-system/basic-networking
 configuration details.

Package: adb-enablemodem
Version: 2017-03-05-1
Depends: libc, adb
Section: net
Architecture: mipsel_mips32
Installed-Size: 850
Filename: adb-enablemodem_2017-03-05-1_mipsel_mips32.ipk
Size: 1538
SHA256sum:e070fec058afeeedbf607db94dbe181cf4c5eb6880caaaf59a1a31c0dd578f41
Description:  Enable modem via adb

Package: adb
Version: android.5.0.2_r1-3
Depends: libc, zlib, libopenssl1.1, libpthread
Section: utils
Architecture: mipsel_mips32
Installed-Size: 53671
Filename: adb_android.5.0.2_r1-3_mipsel_mips32.ipk
Size: 54173
SHA256sum:034291b1f41f2cfdeb3f69d20fbec1ad41cb9a507d10b0b5d48f72819a694f70
Description:  Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device.

Package: agetty
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 21690
Filename: agetty_2.35.1-2_mipsel_mips32.ipk
Size: 22471
SHA256sum:90e76c69d628f9fdd639598d4ccde71d9cafe34b304a0011926753b2342a9bbf
Description:  agetty opens a tty port, prompts for a login name and invokes the
 /bin/login command

Package: aircard-pcmcia-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 438
Filename: aircard-pcmcia-firmware_20200619-1_mipsel_mips32.ipk
Size: 1164
SHA256sum:a67b3e97b11cf79f06940cf8a8a8b71dc1beabf7fb2c85dd5df929ae76e96c52
Description:  Sierra Wireless Aircard 555/7xx/8x0 firmware

Package: amdgpu-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 11682954
Filename: amdgpu-firmware_20200619-1_mipsel_mips32.ipk
Size: 11589124
SHA256sum:0f76776986116abe4a72626debc3b3c381d116c051d4954223f4b0202561206e
Description:  AMDGPU Video Driver firmware

Package: ar3k-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 548141
Filename: ar3k-firmware_20200619-1_mipsel_mips32.ipk
Size: 548687
SHA256sum:a349571a43805a0ce1f04efe86820972c25bd3fce056ed258b973c31eebd2b84
Description:  ath3k firmware

Package: ar
Version: 2.27-1
Depends: libc, zlib, libbfd
License: GPL-3.0+
Section: devel
CPE-ID: cpe:/a:gnu:binutils
Architecture: mipsel_mips32
Installed-Size: 25330
Filename: ar_2.27-1_mipsel_mips32.ipk
Size: 26008
SHA256sum:254770fff4ce0640a4c518b271b71c95e33883f83b02d34a88981fed4dae9347
Description:  ar

Package: arptables
Version: 2015-05-20-f4ab8f63-1
Depends: libc, kmod-arptables
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 21025
Filename: arptables_2015-05-20-f4ab8f63-1_mipsel_mips32.ipk
Size: 21734
SHA256sum:e089ec551f875e75573714465d1c2ce2c5e8adb4d2c80b41887b12c8fe595f6b
Description:  ARP firewalling software

Package: ath10k-firmware-qca4019-ct-full-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca4019
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 469521
Filename: ath10k-firmware-qca4019-ct-full-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 468313
SHA256sum:e90589b9d0b3ac57077325fc594c14e910616d53127b4c6369891244e029f860
Description:  Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 Enables IBSS and other features.
 See:  http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca4019-ct-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca4019
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 424799
Filename: ath10k-firmware-qca4019-ct-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 423715
SHA256sum:8a4490ea62e832cac2ac6efe25444953a67cf30a1791df2d20a40e7d771e86be
Description:  Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 This firmware lacks a lot of features that ath10k does not use, saving
 a lot of resources.
 Enables IBSS and other features.
 See:  http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca4019-ct
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca4019
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 469761
Filename: ath10k-firmware-qca4019-ct_2020-04-24-2_mipsel_mips32.ipk
Size: 468423
SHA256sum:2d0e7b8f08525bfcd3b95906f4db1855c8762ec1bc7f629ea3e35599c5c9155a
Description:  Alternative ath10k firmware for IPQ4019 radio from Candela Technologies.
 Enables IBSS and other features.  Works with standard or ath10k-ct driver.
 See:  http://www.candelatech.com/ath10k-10.4.php

Package: ath10k-firmware-qca4019
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 497257
Filename: ath10k-firmware-qca4019_20200619-1_mipsel_mips32.ipk
Size: 496022
SHA256sum:c1aa40eae25fb19fa19dc54d2a47d9f67e93ae066576eac5cf4eb550012d4c13
Description:  ath10k qca4019 firmware

Package: ath10k-firmware-qca6174
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 863354
Filename: ath10k-firmware-qca6174_20200619-1_mipsel_mips32.ipk
Size: 861032
SHA256sum:bad2f1bd4c7c5d265e72161c7fe8700aa67f4026487287c59717308d719dc19a
Description:  ath10k qca6174 firmware

Package: ath10k-firmware-qca9887-ct-full-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9887
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 195508
Filename: ath10k-firmware-qca9887-ct-full-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 196527
SHA256sum:741ee07be3be020f8afc474e44cc683752fb8de9d910a8d336777af9094f10c4
Description:  Alternative ath10k firmware for QCA9887 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and fixes .11r authentication.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.1.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca9887-ct
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9887
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 195718
Filename: ath10k-firmware-qca9887-ct_2020-04-24-2_mipsel_mips32.ipk
Size: 196655
SHA256sum:95f2bc94b2ea0eebe8be8e74e3e5e2a9968fb2e48ddf5a054ce8f24b028bc029
Description:  Alternative ath10k firmware for QCA9887 from Candela Technologies.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.1.php
 This firmware conflicts with the standard 9887 firmware, so select only
 one.

Package: ath10k-firmware-qca9887
Version: 2019-10-03-d622d160-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 209217
Filename: ath10k-firmware-qca9887_2019-10-03-d622d160-1_mipsel_mips32.ipk
Size: 210071
SHA256sum:b73fba90c0a44ca87148f75f1639699dbe9ce127880b9a2b5fa10dbf2bdcbd4a
Description:  ath10k firmware for QCA9887 devices

Package: ath10k-firmware-qca9888-ct-full-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9888
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 481538
Filename: ath10k-firmware-qca9888-ct-full-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 481244
SHA256sum:0cc5e8bf73d69dd09c8c6ac51c4b122471f7613aa4fffc19cba9527ad99daa70
Description:  Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca9888-ct-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9888
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 432388
Filename: ath10k-firmware-qca9888-ct-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 431972
SHA256sum:3c56631d4b22c3344de5ddeca9f6bd4220752c629d69b5acc3efbdd538a496f8
Description:  Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 This firmware lacks a lot of features that ath10k does not use, saving
 a lot of resources.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca9888-ct
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9888
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 481806
Filename: ath10k-firmware-qca9888-ct_2020-04-24-2_mipsel_mips32.ipk
Size: 481423
SHA256sum:bb51455f09beb0ffa19dfe27efdc8c827955d7c8e1040fd714b8bab2bc5977de
Description:  Alternative ath10k firmware for QCA9886 and QCA9888 from Candela Technologies.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware conflicts with the standard 9886 and 9888 firmware, so select only
 one.

Package: ath10k-firmware-qca9888
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 529317
Filename: ath10k-firmware-qca9888_20200619-1_mipsel_mips32.ipk
Size: 528731
SHA256sum:70539b7dce2fe18f5df213344e677828e121835aa00b61a1aa64b95ceb515f39
Description:  ath10k qca9888 firmware

Package: ath10k-firmware-qca988x-ct-full-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca988x
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 189466
Filename: ath10k-firmware-qca988x-ct-full-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 190477
SHA256sum:08374db145f1150958051f0b91591db5217ba2755c46c1c03ef35ee23edfd230
Description:  Alternative ath10k firmware for QCA988X from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and fixes .11r authentication.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.1.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca988x-ct
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca988x
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 189670
Filename: ath10k-firmware-qca988x-ct_2020-04-24-2_mipsel_mips32.ipk
Size: 190626
SHA256sum:3fb2be1b36d1bcdb75d87c34c036e60939710ff43183449a90596f33c3fdabf5
Description:  Alternative ath10k firmware for QCA988X from Candela Technologies.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.1.php
 This firmware will NOT be used unless the standard ath10k-firmware-qca988x
 is un-selected since the driver will try to load firmware-5.bin before
 firmware-2.bin

Package: ath10k-firmware-qca988x
Version: 2019-10-03-d622d160-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 219173
Filename: ath10k-firmware-qca988x_2019-10-03-d622d160-1_mipsel_mips32.ipk
Size: 219987
SHA256sum:3945751251785923b45384a1fadc2a15892a5d099e75c22888f63e4b19f81dbe
Description:  ath10k firmware for QCA988x devices

Package: ath10k-firmware-qca9984-ct-full-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9984
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 481576
Filename: ath10k-firmware-qca9984-ct-full-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 478761
SHA256sum:cccf882bd02b00552a9a15d21bf4440a16f18360bf420dcce8c60b931669c85d
Description:  Alternative ath10k firmware for QCA9984 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca9984-ct-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9984
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 418718
Filename: ath10k-firmware-qca9984-ct-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 415558
SHA256sum:9c16f8757f3b6b954361b73203fbcec66ae2dba53f3505bc39328bc584b09035
Description:  Alternative ath10k firmware for QCA9984 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 This firmware lacks a lot of features that ath10k does not use, saving
 a lot of resources.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca9984-ct
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca9984
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 481824
Filename: ath10k-firmware-qca9984-ct_2020-04-24-2_mipsel_mips32.ipk
Size: 478861
SHA256sum:5c6d5e918843bebe621f2c1084fe54ddd4bd4d2e3d171603ae736e16c9169b2a
Description:  Alternative ath10k firmware for QCA9984 from Candela Technologies.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware conflicts with the standard 9984 firmware, so select only
 one.

Package: ath10k-firmware-qca9984
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 528091
Filename: ath10k-firmware-qca9984_20200619-1_mipsel_mips32.ipk
Size: 524959
SHA256sum:336d9e058801632085e05cf789d4ae083cccb60e660bbf0634b3b7bad84cfd60
Description:  ath10k qca9984 firmware

Package: ath10k-firmware-qca99x0-ct-full-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca99x0
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 438462
Filename: ath10k-firmware-qca99x0-ct-full-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 436755
SHA256sum:66601f0894a08c56de63fc16e0af915059bc25a5c64acf41dfdea3eb8bdec85e
Description:  Alternative ath10k firmware for QCA99x0 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca99x0-ct-htt
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca99x0
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 399506
Filename: ath10k-firmware-qca99x0-ct-htt_2020-04-24-2_mipsel_mips32.ipk
Size: 397951
SHA256sum:6ef03e88629e938b656c82e77dcdc6d53bc41f1772cb69338d71125bd428d660
Description:  Alternative ath10k firmware for QCA99x0 from Candela Technologies.
 Uses normal HTT TX data path for management frames, which improves
 stability in busy networks and may be required for .11r authentication.
 This firmware lacks a lot of features that ath10k does not use, saving
 a lot of resources.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware selects and requires the ath10k-ct driver.

Package: ath10k-firmware-qca99x0-ct
Version: 2020-04-24-2
Depends: libc
Provides: ath10k-firmware-qca99x0
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 438623
Filename: ath10k-firmware-qca99x0-ct_2020-04-24-2_mipsel_mips32.ipk
Size: 436947
SHA256sum:96a2525eca7ac18c18a37e2898a9ef8250655ae8f3b4168708f58d50200a083b
Description:  Alternative ath10k firmware for QCA99x0 from Candela Technologies.
 Enables IBSS and other features.  See:
 http://www.candelatech.com/ath10k-10.4.php
 This firmware conflicts with the standard 99x0 firmware, so select only
 one.

Package: ath10k-firmware-qca99x0
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 377011
Filename: ath10k-firmware-qca99x0_20200619-1_mipsel_mips32.ipk
Size: 375057
SHA256sum:43782cfb4a535cef80efd4f6283161c2442aa6f099289b26e499ea794eefd730
Description:  ath10k qca99x0 firmware

Package: ath6k-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 712115
Filename: ath6k-firmware_20200619-1_mipsel_mips32.ipk
Size: 712835
SHA256sum:dee9db38213451fc705e5a666be081a227c01331a3b4ee0cdf12f08331b08deb
Description:  AR600X firmware

Package: ath9k-htc-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 61878
Filename: ath9k-htc-firmware_20200619-1_mipsel_mips32.ipk
Size: 62359
SHA256sum:46d559cc5b57cacec0d03b021b0d3ce392bfbb8a59866ef28343da030aaa61a8
Description:  AR9271/AR7010 firmware

Package: atm-aread
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2051
Filename: atm-aread_2.5.2-7_mipsel_mips32.ipk
Size: 2767
SHA256sum:2c43fba42161175491bcc43a3a2a734c65eaa95e7115953a389d3aa360cd7e78
Description:  Linux ATM tool aread.

Package: atm-atmaddr
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2424
Filename: atm-atmaddr_2.5.2-7_mipsel_mips32.ipk
Size: 3111
SHA256sum:c10a2e01274c54bc69dc165d6ae54b706009488e0acc201773147130ab2c0b81
Description:  Linux ATM tool atmaddr.

Package: atm-atmdiag
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 1948
Filename: atm-atmdiag_2.5.2-7_mipsel_mips32.ipk
Size: 2670
SHA256sum:88bc639ec52a502e082e473f3fe9f972c6e808e57d84bbd60e99b4e71620f62a
Description:  Linux ATM tool atmdiag.

Package: atm-atmdump
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2917
Filename: atm-atmdump_2.5.2-7_mipsel_mips32.ipk
Size: 3615
SHA256sum:3fe0c7ebdcc321dee0a2153463848d9a0990f37b9c174de229d9a418ff1809b5
Description:  Linux ATM tool atmdump.

Package: atm-atmloop
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2443
Filename: atm-atmloop_2.5.2-7_mipsel_mips32.ipk
Size: 3135
SHA256sum:5019fae43c480f8c30f1bebed556e6cbd15c06835e7b82783a3e2723d2e6b197
Description:  Linux ATM tool atmloop.

Package: atm-atmsigd
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 70409
Filename: atm-atmsigd_2.5.2-7_mipsel_mips32.ipk
Size: 70944
SHA256sum:fb3af48cf9161e1bf58fc7a83dbd9518c77220ff1cf6d9a19dfb8147676e86c0
Description:  Linux ATM tool atmsigd.

Package: atm-atmswitch
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2641
Filename: atm-atmswitch_2.5.2-7_mipsel_mips32.ipk
Size: 3334
SHA256sum:f64b8a1eb9f577da5b340c467d50d41f2b8edd18ad71b978c7a6dbca71fe2344
Description:  Linux ATM tool atmswitch.

Package: atm-atmtcp
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 7832
Filename: atm-atmtcp_2.5.2-7_mipsel_mips32.ipk
Size: 8588
SHA256sum:072c80eadf306a05d32ea269fca1c449613d07a58165e45a39e2d46aa9318f96
Description:  Linux ATM tool atmtcp.

Package: atm-awrite
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 1840
Filename: atm-awrite_2.5.2-7_mipsel_mips32.ipk
Size: 2568
SHA256sum:7705589d78c997d0bc7356efa734ffb5bc7f22a034aa0bacdd53960c73ebc7dc
Description:  Linux ATM tool awrite.

Package: atm-bus
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 18636
Filename: atm-bus_2.5.2-7_mipsel_mips32.ipk
Size: 19356
SHA256sum:2949daacc0a0ca40b6554a9bc31e9becd63ac7d7be99f093c95e82a135e47ab6
Description:  Linux ATM tool bus.

Package: atm-debug-tools
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 230709
Filename: atm-debug-tools_2.5.2-7_mipsel_mips32.ipk
Size: 230631
SHA256sum:ff016d12b42f1bdf4ed01abaa7980ddca57d29e8616eca0d70adcfeaef41eab8
Description:  This package contains the Linux ATM debugging tools.

Package: atm-diagnostics
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 5949
Filename: atm-diagnostics_2.5.2-7_mipsel_mips32.ipk
Size: 6574
SHA256sum:8a60d4f661a0761a3fc8714f6077eaed6f0d2f1139ed4affcf140ef920fabe9e
Description:  This package contains the Linux ATM diagnostics.

Package: atm-esi
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2031
Filename: atm-esi_2.5.2-7_mipsel_mips32.ipk
Size: 2757
SHA256sum:ce47c85636ef28ceeade2657a6bbb8f7b5d0fdaf0945fc8aa3de8fa2c4b8b273
Description:  Linux ATM tool esi.

Package: atm-ilmid
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 21608
Filename: atm-ilmid_2.5.2-7_mipsel_mips32.ipk
Size: 22319
SHA256sum:09855dd76612b953acbe1f65943c978d47437db477ff476811d621122f5a850d
Description:  Linux ATM tool ilmid.

Package: atm-ilmidiag
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2234
Filename: atm-ilmidiag_2.5.2-7_mipsel_mips32.ipk
Size: 2964
SHA256sum:c73f19f45a8f5c74cb896960affd2cbadaa7f3918cfda16deb3684c48c02fc5d
Description:  Linux ATM tool ilmidiag.

Package: atm-lecs
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 10592
Filename: atm-lecs_2.5.2-7_mipsel_mips32.ipk
Size: 11299
SHA256sum:bfd61e953b97aa8da9989d002c962e34df2b137757e905f0d47d059578240abd
Description:  Linux ATM tool lecs.

Package: atm-les
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 21798
Filename: atm-les_2.5.2-7_mipsel_mips32.ipk
Size: 22457
SHA256sum:1e132b54724bf9b1041ccfa2a7d57fe401a182059debc08871718561bc1ca979
Description:  Linux ATM tool les.

Package: atm-mpcd
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 13691
Filename: atm-mpcd_2.5.2-7_mipsel_mips32.ipk
Size: 14364
SHA256sum:f81e2660e8213791283111cffd9b1258dcb7ee9f008859c3787850b0095cac38
Description:  Linux ATM tool mpcd.

Package: atm-saaldump
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 25215
Filename: atm-saaldump_2.5.2-7_mipsel_mips32.ipk
Size: 25769
SHA256sum:0e370043b5a590ec0bd6faab45e057ab5a80ccabde4aa9219ba87e7bceffccfa
Description:  Linux ATM tool saaldump.

Package: atm-sonetdiag
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2427
Filename: atm-sonetdiag_2.5.2-7_mipsel_mips32.ipk
Size: 3109
SHA256sum:f5a31db4ece0a9e2d15352cb72468f41c83c3a4482c22d3f81bb97c4249762ff
Description:  Linux ATM tool sonetdiag.

Package: atm-svc_recv
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2469
Filename: atm-svc_recv_2.5.2-7_mipsel_mips32.ipk
Size: 3152
SHA256sum:c9c4a70d23ff83b0d2f2725c510a7877b6d7d903065cf96893c4bcb4ef678d82
Description:  Linux ATM tool svc_recv.

Package: atm-svc_send
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 2158
Filename: atm-svc_send_2.5.2-7_mipsel_mips32.ipk
Size: 2883
SHA256sum:d1479e55775097b0bd03304bc2d31629145b3f9743052d720930fd2118103b5e
Description:  Linux ATM tool svc_send.

Package: atm-tools
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 17884
Filename: atm-tools_2.5.2-7_mipsel_mips32.ipk
Size: 18602
SHA256sum:f17d9945d8f153130e4703ec4cfb816002f71e5f31f7a16ad5e39a458bf338e7
Description:  This package contains the Linux ATM tools.

Package: atm-ttcp_atm
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 8292
Filename: atm-ttcp_atm_2.5.2-7_mipsel_mips32.ipk
Size: 8993
SHA256sum:5062c5ca8d5905493252aded3b448f359a2bd2526dcd3d6b822be78f7a46cb05
Description:  Linux ATM tool ttcp_atm.

Package: atm-zeppelin
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 20185
Filename: atm-zeppelin_2.5.2-7_mipsel_mips32.ipk
Size: 20891
SHA256sum:085b599dfe8374e5f26f0b56ea9fb4a708cd607b384eb11fe1174fe0fe6fcbca
Description:  Linux ATM tool zeppelin.

Package: b43legacy-firmware
Version: 3.130.20.0-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 16430
Filename: b43legacy-firmware_3.130.20.0-1_mipsel_mips32.ipk
Size: 17006
SHA256sum:82cf761721a39776afe49a163a0d48ad13ad6e1b8c73f33dd4c495367b368230
Description:  Broadcom bcm43xx b43legacy firmware

Package: badblocks
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 9083
Filename: badblocks_1.45.6-1_mipsel_mips32.ipk
Size: 9787
SHA256sum:f460c32eeebe0a7c55290b8dd224cacfb75d8980086bc7bd44fd80e014f3a9d8
Description:  Ext2 Filesystem badblocks utility

Package: binutils
Version: 2.27-1
Depends: libc, objdump, ar
Alternatives: 200:/usr/bin/strings:/usr/bin/binutils-strings
License: GPL-3.0+
Section: devel
CPE-ID: cpe:/a:gnu:binutils
Architecture: mipsel_mips32
Installed-Size: 1100142
Filename: binutils_2.27-1_mipsel_mips32.ipk
Size: 1091720
SHA256sum:5aa1185bee7ca152365ce7013b491898deba40f74f18fac5d2e3586385d5b78c
Description:  The Binutils package contains a linker, an assembler, and other tools for handling object files

Package: blkdiscard
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 9204
Filename: blkdiscard_2.35.1-2_mipsel_mips32.ipk
Size: 10063
SHA256sum:1f8b2cdf9f4eaed2379c5016cc88ed0c1bf290f7c31c0b133298ab219732524a
Description:  The blkdiscard is used to discard device sectors. This is useful for
 solid-state drivers (SSDs) and thinly-provisioned storage. Unlike fstrim,
 this command is used directly on the block device.

Package: blkid
Version: 2.35.1-2
Depends: libc, libblkid1, libuuid1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 42003
Filename: blkid_2.35.1-2_mipsel_mips32.ipk
Size: 42797
SHA256sum:956ee70331f3c2942492967b39acb5f3e577d6857c4c106ddb7a33ddd036ae8d
Description:  The blkid program is the command-line interface to working with the libblkid
 library.

Package: blockdev
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 20535
Filename: blockdev_2.35.1-2_mipsel_mips32.ipk
Size: 21295
SHA256sum:bb8eb67d450a5fc0633521a94f950614d5b04913cfe2fd2641f9258a7786792c
Description:  The blockdev program is the command-line interface to call block device ioctls.

Package: bnx2-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 705118
Filename: bnx2-firmware_20200619-1_mipsel_mips32.ipk
Size: 705163
SHA256sum:75cf12d2b214c5912f76749ca3fd44755ebd652d217727bfba070ecbed14acbb
Description:  Broadcom BCM5706/5708/5709/5716 firmware

Package: bnx2x-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 9173672
Filename: bnx2x-firmware_20200619-1_mipsel_mips32.ipk
Size: 9140330
SHA256sum:01f0f8b0964a2406d0c5675f5422f51580b203757c24bbaa1347ddba81117909
Description:  =QLogic 5771x/578xx firmware

Package: br2684ctl
Version: 2.5.2-7
Depends: libc, linux-atm
License: GPL-2.0+
Section: net
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 5078
Filename: br2684ctl_2.5.2-7_mipsel_mips32.ipk
Size: 5839
SHA256sum:fc318a09e51d6d3a7346f5c71240b8991a66325cbf5ca3b13cc78a7a3b8734d1
Description:  Support for AAL5 encapsulation (RFC-1483/RFC-2684) over ATM.

Package: brcmfmac-firmware-4329-sdio
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 177016
Filename: brcmfmac-firmware-4329-sdio_20200619-1_mipsel_mips32.ipk
Size: 177822
SHA256sum:92bba05f13bdafba0fc27af1b8d9ac5ffdcbf197bd612a51422c4b38636e0d79
Description:  Broadcom BCM4329 FullMac SDIO firmware

Package: brcmfmac-firmware-43362-sdio
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 129790
Filename: brcmfmac-firmware-43362-sdio_20200619-1_mipsel_mips32.ipk
Size: 130569
SHA256sum:428baf185c2492820c2719a323bb1b06d33db45d0172f85ae14dd0556712a837
Description:  Broadcom BCM43362 FullMac SDIO firmware

Package: brcmfmac-firmware-43430-sdio-rpi-3b
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 749
Filename: brcmfmac-firmware-43430-sdio-rpi-3b_20200619-1_mipsel_mips32.ipk
Size: 1490
SHA256sum:c4a5722a96500324154143f6db6838a1d356a12bd6a612e25c9220bd3dfc38ec
Description:  Broadcom BCM43430 NVRAM for Raspberry Pi 3B

Package: brcmfmac-firmware-43430-sdio-rpi-zero-w
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 755
Filename: brcmfmac-firmware-43430-sdio-rpi-zero-w_20200619-1_mipsel_mips32.ipk
Size: 1505
SHA256sum:a301da5e741f0a59b8659d2bc1afe79516e6bc237b53e6ae3da62d62a259c15e
Description:  Broadcom BCM43430 NVRAM for Raspberry Pi Zero W

Package: brcmfmac-firmware-43430-sdio
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 260823
Filename: brcmfmac-firmware-43430-sdio_20200619-1_mipsel_mips32.ipk
Size: 261554
SHA256sum:860099651ec9253bcb300d358eabb85a6923a603ea2e597ddecdcc1f33edaebd
Description:  Broadcom BCM43430 FullMac SDIO firmware

Package: brcmfmac-firmware-43430a0-sdio
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 259118
Filename: brcmfmac-firmware-43430a0-sdio_20200619-1_mipsel_mips32.ipk
Size: 259897
SHA256sum:1adc07a9a1951335b3e648f57d0feb590990a64850c958a26261c1e58df28150
Description:  Broadcom BCM43430a0 FullMac SDIO firmware

Package: brcmfmac-firmware-43455-sdio-rpi-3b-plus
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 1078
Filename: brcmfmac-firmware-43455-sdio-rpi-3b-plus_20200619-1_mipsel_mips32.ipk
Size: 1830
SHA256sum:d0707364dcf093c6feeb648a453a4705fbd44158cc6cb3b0cce216a52448f761
Description:  Broadcom BCM43455 NVRAM for Raspberry Pi 3B+

Package: brcmfmac-firmware-43455-sdio-rpi-4b
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 1075
Filename: brcmfmac-firmware-43455-sdio-rpi-4b_20200619-1_mipsel_mips32.ipk
Size: 1816
SHA256sum:bdcfcadc034e13d8679acb9bf93a444d9cda9f0cd11f6416a098515db81709e6
Description:  Broadcom BCM43455 NVRAM for Raspberry Pi 4B

Package: brcmfmac-firmware-43455-sdio
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 311647
Filename: brcmfmac-firmware-43455-sdio_20200619-1_mipsel_mips32.ipk
Size: 312337
SHA256sum:d53a5357512e5334a5db2812528c1e52062ff99cf9905bdc205584e6fc870cec
Description:  Broadcom BCM43455 FullMac SDIO firmware

Package: brcmfmac-firmware-43602a1-pcie
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 370269
Filename: brcmfmac-firmware-43602a1-pcie_20200619-1_mipsel_mips32.ipk
Size: 370392
SHA256sum:2f6771c7317ea252b0f1f57e1aba255b0b4ca2e7d6112b4caa7c7b4ff66ff93b
Description:  Broadcom 43602a1 FullMAC PCIe firmware

Package: brcmfmac-firmware-4366b1-pcie
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 637321
Filename: brcmfmac-firmware-4366b1-pcie_20200619-1_mipsel_mips32.ipk
Size: 637034
SHA256sum:6ac0e80df9c331723ad0e26e5d0a44bb328019b0ebe14343edaeb8cd1dd02477
Description:  Broadcom 4366b1 FullMAC PCIe firmware

Package: brcmfmac-firmware-4366c0-pcie
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 647584
Filename: brcmfmac-firmware-4366c0-pcie_20200619-1_mipsel_mips32.ipk
Size: 647207
SHA256sum:f54f1de916a4f6af531e6e05d9fd14fea7d5e2bc50a7f6c722c5c250b794d7ba
Description:  Broadcom 4366c0 FullMAC PCIe firmware

Package: brcmfmac-firmware-usb
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 502984
Filename: brcmfmac-firmware-usb_20200619-1_mipsel_mips32.ipk
Size: 503667
SHA256sum:769a5da01cdf135640f5e7b3862fab78cac5ac725fb88c2f03f9923ddf84c491
Description:  Broadcom BCM43xx fullmac USB firmware

Package: brcmsmac-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 42179
Filename: brcmsmac-firmware_20200619-1_mipsel_mips32.ipk
Size: 42542
SHA256sum:5bff91979b68ea98bf7b3f7dc294ff592733ea613bbcec913b5b95d636239d02
Description:  Broadcom BCM43xx softmac PCIe firmware

Package: bsdiff
Version: 4.3-1
Depends: libc, libbz2-1.0
License: BSD-2-Clause
Section: utils
Architecture: mipsel_mips32
Installed-Size: 6176
Filename: bsdiff_4.3-1_mipsel_mips32.ipk
Size: 6869
SHA256sum:b8db267407724cb855871991384863f7a4e4858ab8e36646a46c4676778a9155
Description:  Binary diff tool

Package: bspatch
Version: 4.3-1
Depends: libc, libbz2-1.0
License: BSD-2-Clause
Section: utils
Architecture: mipsel_mips32
Installed-Size: 2855
Filename: bspatch_4.3-1_mipsel_mips32.ipk
Size: 3553
SHA256sum:7750a61f27ae12b1eabb172ee4b9c2da62029222e26b23f3d655580e1e944fcd
Description:  Binary patch tool

Package: busybox
Version: 1.31.1-1
Depends: libc
License: GPL-2.0
Section: base
CPE-ID: cpe:/a:busybox:busybox
Essential: yes
Architecture: mipsel_mips32
Installed-Size: 245393
Filename: busybox_1.31.1-1_mipsel_mips32.ipk
Size: 245837
SHA256sum:9ee1cbc54a4bf084bc1202e442d65cd55feb0518b3eca2a600258d485dee9d0e
Description:  The Swiss Army Knife of embedded Linux.
 It slices, it dices, it makes Julian Fries.

Package: bzip2
Version: 1.0.8-1
Depends: libc, libbz2-1.0
License: bzip2-1.0.8
Section: utils
CPE-ID: cpe:/a:bzip:bzip2
Architecture: mipsel_mips32
Installed-Size: 12689
Filename: bzip2_1.0.8-1_mipsel_mips32.ipk
Size: 13470
SHA256sum:6bfaaa4f3f27871fdfa68ab160ae1d801bd9b1e80cc42f11acdb31425fa5d78b
Description:  bzip2 is a freely available, patent free, high-quality
 data compressor. This package provides the binary.

Package: ca-bundle
Version: 20200601-1
Depends: libc
Provides: ca-certs
Section: base
Architecture: all
Installed-Size: 115552
Filename: ca-bundle_20200601-1_all.ipk
Size: 116335
SHA256sum:078955da72fea51a7f4cbd42581534ba100de36d2fde6a18bfbbeca57f47384d
Description:  System CA certificates as a bundle

Package: ca-certificates
Version: 20200601-1
Depends: libc
Provides: ca-certs
Section: base
Architecture: all
Installed-Size: 125105
Filename: ca-certificates_20200601-1_all.ipk
Size: 125812
SHA256sum:dc379218dfa86f8cbf465a9d2dccd28334c56410158db6b116cc9f3010da9f8a
Description:  System CA certificates

Package: cal
Version: 2.35.1-2
Depends: libc, libncurses6
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 22993
Filename: cal_2.35.1-2_mipsel_mips32.ipk
Size: 23648
SHA256sum:32b68412e8da0e58bc52e1a3d51a86e3e88388f1f57b0be3b5df2543b3d559b4
Description:  cal displays a simple calendar

Package: carl9170-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 9763
Filename: carl9170-firmware_20200619-1_mipsel_mips32.ipk
Size: 10489
SHA256sum:9d76d5b21eac37409bf38a206fd2a04a45f1f8aec73bd9487b12b3ac1ee199f2
Description:  AR9170 firmware

Package: cfdisk
Version: 2.35.1-2
Depends: libc, libblkid1, libncurses6, libsmartcols1, libfdisk1, libmount1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 34300
Filename: cfdisk_2.35.1-2_mipsel_mips32.ipk
Size: 35054
SHA256sum:97455a45da9e8deb12793e6a64a98fecc121e5c7ffffe5078195cd41234d4415
Description:  cfdisk is a curses-based program for partitioning any hard disk drive

Package: chat
Version: 2.4.8.git-2020-05-25-2
Depends: libc
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 9298
Filename: chat_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 10107
SHA256sum:c05767597da84c5617886b0d4e4ce91ff2ab8449f410b4642721de5d5ea8a20a
Description:  This package contains an utility to establish conversation with other PPP servers
 (via a modem).

Package: chattr
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 3138
Filename: chattr_1.45.6-1_mipsel_mips32.ipk
Size: 3834
SHA256sum:01d812626fd6fd5b113d9652391ca3e7da2b8d81fa29b32b75ca4114d603b008
Description:  Ext2 Filesystem chattr utility

Package: ct-bugcheck
Version: 2016-07-21
Depends: libc
Section: utils
Architecture: mipsel_mips32
Installed-Size: 1627
Filename: ct-bugcheck_2016-07-21_mipsel_mips32.ipk
Size: 2507
SHA256sum:0ea8512379dcea873b8352e5444ad11a7130f0624039b719f0637b70954aa6a7
Description:  Scripts to check for bugs (like firmware crashes) and package them for reporting.
 Currently this script only checks for ath10k firmware crashes.
 Once installed, you can enable this tool by creating a file called
 /etc/config/bugcheck with the following contents:
 DO_BUGCHECK=1
 export DO_BUGCHECK
 

Package: curl
Version: 7.71.1-1
Depends: libc, libcurl4
License: MIT
Section: net
CPE-ID: cpe:/a:haxx:libcurl
Architecture: mipsel_mips32
Installed-Size: 55824
Filename: curl_7.71.1-1_mipsel_mips32.ipk
Size: 56515
SHA256sum:001d8fab6be5716bffff33e88c202c1bf4feddd6f8efadf3ea53f65e4ff578eb
Description:  A client-side URL transfer utility

Package: cypress-firmware-43012-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 292891
Filename: cypress-firmware-43012-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 293471
SHA256sum:945c4c5d579ad1a830f5a72b483eda770d04c5441f047d26aa8d249cb545cebd
Description:  CYW43012 FullMac SDIO firmware

Package: cypress-firmware-43340-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 267912
Filename: cypress-firmware-43340-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 268746
SHA256sum:4151584e09a3f141559e39fd0fdd510b2c5d71e74d8ffdc158ddb05f0223a8f7
Description:  CYW43340 FullMac SDIO firmware

Package: cypress-firmware-43362-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Provides: brcmfmac-firmware-43362-sdio
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 130157
Filename: cypress-firmware-43362-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 130979
SHA256sum:755406b88b5ad95874f1506687ee46209a25f788b2be546c498f636f461c2481
Description:  CYW43362 FullMac SDIO firmware

Package: cypress-firmware-4339-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 342059
Filename: cypress-firmware-4339-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 342362
SHA256sum:b23504ea2ec9c332cf4aecf558673fee9223db1fbeb682cc9c17661597e13fab
Description:  CYW4339 FullMac SDIO firmware

Package: cypress-firmware-43430-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Provides: brcmfmac-firmware-43430-sdio
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 287685
Filename: cypress-firmware-43430-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 288492
SHA256sum:9c418db14f157aded54b7497566ec268736dd5564756cafca2ebe3357d8795e4
Description:  CYW43430 FullMac SDIO firmware

Package: cypress-firmware-43455-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Provides: brcmfmac-firmware-43455-sdio
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 428203
Filename: cypress-firmware-43455-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 429073
SHA256sum:1d6b3f2717ffdfb0803317982cb1cff08c870e0cad164bf0127379b13f40306e
Description:  CYW43455 FullMac SDIO firmware

Package: cypress-firmware-4354-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 401536
Filename: cypress-firmware-4354-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 401632
SHA256sum:6bbe472c8be336a0b56f60c48b8d23e5dbb5805ea0e238b71c6c189d9b227040
Description:  CYW4354 FullMac SDIO firmware

Package: cypress-firmware-4356-pcie
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 406209
Filename: cypress-firmware-4356-pcie_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 406311
SHA256sum:e122b5f32f6d081483719a90675296e21964435ee2fb5b5501670294a4a28304
Description:  CYW4356 FullMac PCIe firmware

Package: cypress-firmware-4356-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 389595
Filename: cypress-firmware-4356-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 389649
SHA256sum:81cf955ea6652f01ea9c7f015ab2d1635619ccd9e2c09d49209fc8bed9f1fdb5
Description:  CYW4356 FullMac SDIO firmware

Package: cypress-firmware-43570-pcie
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 368135
Filename: cypress-firmware-43570-pcie_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 368406
SHA256sum:20e4aff7924cfac34cc6c2afbe03ee4b7418e0d83059fe0ce039db2aac2512d4
Description:  CYW43570 FullMac PCIe firmware

Package: cypress-firmware-4359-pcie
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 391536
Filename: cypress-firmware-4359-pcie_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 392132
SHA256sum:e0081c16c134b4d701b56b7520363627f61adfb3ebe6983f6903b15be216630e
Description:  CYW4359 FullMac PCIe firmware

Package: cypress-firmware-4359-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 365519
Filename: cypress-firmware-4359-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 366228
SHA256sum:ae93a18161b792fbaa733e94d179385f8257fabbf49f0926d452f3cf439e799b
Description:  CYW4359 FullMac SDIO firmware

Package: cypress-firmware-4373-sdio
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 362718
Filename: cypress-firmware-4373-sdio_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 363212
SHA256sum:12761d9234f2b60153c1498fb2c7b8fb9e4f3f32c6c841d80745a8d7e2566213
Description:  CYW4373 FullMac SDIO firmware

Package: cypress-firmware-4373-usb
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 367156
Filename: cypress-firmware-4373-usb_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 367725
SHA256sum:0611ee3b443ed30d2a56334a1c3d51e62531b244e7d47aef53d9bbf2a9eb92f0
Description:  CYW4373 FullMac USB firmware

Package: cypress-firmware-54591-pcie
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 381965
Filename: cypress-firmware-54591-pcie_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 382633
SHA256sum:e3ebaba01a6b05a06cedaeeee139aacec765419ca1163243e865e626c5a81d17
Description:  CYW54591 FullMac PCIe firmware

Package: cypress-firmware-89459-pcie
Version: v5.4.18-2020_0402-2
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 390050
Filename: cypress-firmware-89459-pcie_v5.4.18-2020_0402-2_mipsel_mips32.ipk
Size: 390664
SHA256sum:e488f96cd1e03af308310ee214e312d7f320cbaca46a9fc6ef33faa100554133
Description:  CYW89459 FullMac PCIe firmware

Package: debugfs
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 66739
Filename: debugfs_1.45.6-1_mipsel_mips32.ipk
Size: 66820
SHA256sum:9cffe6c9a113c1205717f73e567f610eba9fcedcf22f656ed9a361027cbf38eb
Description:  Ext2 Filesystem debugger

Package: devlink
Version: 5.7.0-2
Depends: libc, libmnl0, libelf1
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 30322
Filename: devlink_5.7.0-2_mipsel_mips32.ipk
Size: 31037
SHA256sum:d973dd26174063dfc5906401c279a08719ef4f612c42089d2ae685b95795163c
Description:  Network devlink utility

Package: dmesg
Version: 2.35.1-2
Depends: libc, libncursesw6
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 24402
Filename: dmesg_2.35.1-2_mipsel_mips32.ipk
Size: 25056
SHA256sum:e61efada1b93db7765ad35024045b8683629b7dd7ad6289a57a0925dc65d1135
Description:  dmesg  is used to examine or control the kernel ring buffer

Package: dnsmasq-dhcpv6
Version: 2.81-3
Depends: libc, libubus20191227
Provides: dnsmasq
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:thekelleys:dnsmasq
Architecture: mipsel_mips32
Installed-Size: 161563
Filename: dnsmasq-dhcpv6_2.81-3_mipsel_mips32.ipk
Size: 162178
SHA256sum:b97d7ce71cf9db3a7627783c4ecf43796be553f5ae60e4c0fd4b98fa4e811365
Description:  It is intended to provide coupled DNS and DHCP service to a LAN.
 
 This is a variant with DHCPv6 support

Package: dnsmasq-full
Version: 2.81-3
Depends: libc, libubus20191227, libnettle7, kmod-ipt-ipset, libnetfilter-conntrack3
Provides: dnsmasq
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:thekelleys:dnsmasq
Architecture: mipsel_mips32
Installed-Size: 185292
Filename: dnsmasq-full_2.81-3_mipsel_mips32.ipk
Size: 185989
SHA256sum:6f729147fdd6fee48190398e702bd6e04cfcef888478342a5455fc57911fc57c
Description:  It is intended to provide coupled DNS and DHCP service to a LAN.
 
 This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS
 and IPset, Conntrack support & NO_ID enabled by default.

Package: dnsmasq
Version: 2.81-3
Depends: libc, libubus20191227
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:thekelleys:dnsmasq
Architecture: mipsel_mips32
Installed-Size: 133033
Filename: dnsmasq_2.81-3_mipsel_mips32.ipk
Size: 133647
SHA256sum:933769ba19e8bc0bcb5ab825f9e2f01d269a88d07d54d45215da18cbab2efe79
Description:  It is intended to provide coupled DNS and DHCP service to a LAN.

Package: dropbear
Version: 2020.80-1
Depends: libc
Alternatives: 100:/usr/bin/ssh:/usr/sbin/dropbear, 100:/usr/bin/scp:/usr/sbin/dropbear
License: MIT
Section: net
CPE-ID: cpe:/a:matt_johnston:dropbear_ssh_server
Architecture: mipsel_mips32
Installed-Size: 105400
Filename: dropbear_2020.80-1_mipsel_mips32.ipk
Size: 106121
SHA256sum:d2bf34c68b593babf1c7936289f8128db875cd69bc810e5631fb87af0b431d78
Description:  A small SSH2 server/client designed for small memory environments.

Package: dropbearconvert
Version: 2020.80-1
Depends: libc
License: MIT
Section: utils
CPE-ID: cpe:/a:matt_johnston:dropbear_ssh_server
Architecture: mipsel_mips32
Installed-Size: 24068
Filename: dropbearconvert_2020.80-1_mipsel_mips32.ipk
Size: 24777
SHA256sum:f60f1995f5b413f1e169642e333c224e087f496807b717be35bbe0fd4cb9b6a2
Description:  Utility for converting SSH keys

Package: ds-lite
Version: 8
Depends: libc, kmod-ip6-tunnel, resolveip
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 1091
Filename: ds-lite_8_all.ipk
Size: 1890
SHA256sum:e0536b19799ca632fb1b04a9e111ead26f8e63df4176e5edeb7a01a0bcfce128
Description:  Provides support for Dual-Stack Lite in /etc/config/network.
 Refer to http://wiki.openwrt.org/doc/uci/network for
 configuration details.

Package: dumpe2fs
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 8736
Filename: dumpe2fs_1.45.6-1_mipsel_mips32.ipk
Size: 9448
SHA256sum:7901926e20682c7f11f7160917aedd6c4e702cf4b6e4618859e347e986c4aa78
Description:  Ext2 Filesystem information dumping utility

Package: e100-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 832
Filename: e100-firmware_20200619-1_mipsel_mips32.ipk
Size: 1543
SHA256sum:1904f3a7ba9b3e03ff960dfe73e893b6dce1fd0dd74b3c35976416b9a1498b44
Description:  Intel e100

Package: e2freefrag
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 4450
Filename: e2freefrag_1.45.6-1_mipsel_mips32.ipk
Size: 5164
SHA256sum:26d66bb5d9140c17c50bdc109f26cfe4d05c3676aedd404a6b38c2dc8f92fa0b
Description:  Ext2 Filesystem free space fragmentation information utility

Package: e2fsprogs
Version: 1.45.6-1
Depends: libc, libuuid1, libext2fs2
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 177863
Filename: e2fsprogs_1.45.6-1_mipsel_mips32.ipk
Size: 177873
SHA256sum:2acf7a4533ed2c34ffd58c0bb672b5be418afeefa54da1b885577aded015d6d2
Description:  This package contains essential ext2 filesystem utilities which consists of
 e2fsck, mke2fs and most of the other core ext2 filesystem utilities.

Package: e4crypt
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 7157
Filename: e4crypt_1.45.6-1_mipsel_mips32.ipk
Size: 7914
SHA256sum:ffc4fe96df9e92e2db369b4cbd27f362a86b3710a3cd822b438d243c25d9a625
Description:  Ext4 Filesystem encryption utility

Package: ead
Version: 1
Depends: libc
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 122901
Filename: ead_1_mipsel_mips32.ipk
Size: 123640
SHA256sum:30949acd0178f610244325eb4314db9051a802b8847faaad891c09229bb20716
Description:  Provides remote access to your device even if IP and firewall
 configuration settings are defunct

Package: eapol-test-openssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, libubus20191227, libopenssl1.1
Conflicts: eapol-test, eapol-test-wolfssl
Provides: eapol-test
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 444798
Filename: eapol-test-openssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 444540
SHA256sum:0b498bba0e66658969aa28574fbb1ba0edab5c51be21f03b4319f83207ab515f
Description:  802.1x authentication test utility

Package: eapol-test-wolfssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, libubus20191227, libwolfssl24
Conflicts: eapol-test
Provides: eapol-test
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 441940
Filename: eapol-test-wolfssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 442072
SHA256sum:1da5e0b273bdfc6e676dee67ae6de7a165b440254e8d7d8bdeba81db13208afa
Description:  802.1x authentication test utility

Package: eapol-test
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, libubus20191227
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 339396
Filename: eapol-test_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 339274
SHA256sum:32157e442645d7321e4d3edfc21bc9b96546ab3f910c665dfab1f2179c3a1d20
Description:  802.1x authentication test utility

Package: ebtables-utils
Version: 2018-06-27-48cff25d-1
Depends: libc, kmod-ebtables, ebtables
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 3630
Filename: ebtables-utils_2018-06-27-48cff25d-1_mipsel_mips32.ipk
Size: 4445
SHA256sum:7a8bc82974c1cc877a91d50002c0ca4139fbe87b1ea6b5ff93585a480cef6d8f
Description:  The ebtables program is a filtering tool for a bridging firewall. The
 filtering is focussed on the Link Layer Ethernet frame fields. Apart
 from filtering, it also gives the ability to alter the Ethernet MAC
 addresses and implement a brouter.

Package: ebtables
Version: 2018-06-27-48cff25d-1
Depends: libc, kmod-ebtables
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 64818
Filename: ebtables_2018-06-27-48cff25d-1_mipsel_mips32.ipk
Size: 65485
SHA256sum:0f90224e6d17f53727788b2f4dda83238da22463b406eebc38bc81d41459a424
Description:  The ebtables program is a filtering tool for a bridging firewall. The
 filtering is focussed on the Link Layer Ethernet frame fields. Apart
 from filtering, it also gives the ability to alter the Ethernet MAC
 addresses and implement a brouter.

Package: edgeport-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 18899
Filename: edgeport-firmware_20200619-1_mipsel_mips32.ipk
Size: 19580
SHA256sum:66cbcd82a41fce176df8c6c07133da30cce88e0a55d67ff7d393295fd1b7f669
Description:  USB Inside Out Edgeport Serial Driver firmware

Package: eip197-mini-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 425
Filename: eip197-mini-firmware_20200619-1_mipsel_mips32.ipk
Size: 1142
SHA256sum:421accb6406348d55295c8a01d670bd759da4923a06053e8a6f60495a3f299e2
Description:  Inside Secure EIP197 mini firmware

Package: eject
Version: 2.35.1-2
Depends: libc, libblkid1, libmount1, libuuid1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 26646
Filename: eject_2.35.1-2_mipsel_mips32.ipk
Size: 27484
SHA256sum:910561ad49fa1d5e53d812fc4924283ca248db7fd9b0eb30b346e24c15fd8ec5
Description:  eject allows removable media (typically a CD-ROM, floppy disk, tape, or JAZ
 or ZIP disk) to be ejected under software control.

Package: ethtool
Version: 5.4-1
Depends: libc
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 34241
Filename: ethtool_5.4-1_mipsel_mips32.ipk
Size: 35013
SHA256sum:7b91f25ee8c4f1fbd070bf5b2374a29d3ddae72c0bb382f624939458bd34223f
Description:  ethtool is a small utility for examining and tuning your ethernet-based
 network interface

Package: f2fs-tools
Version: 1.13.0-1
Depends: libc, libf2fs6, mkf2fs, f2fsck
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 7259
Filename: f2fs-tools_1.13.0-1_mipsel_mips32.ipk
Size: 8033
SHA256sum:ae05a701d6c9d4f93e3fb9a637dd870a5cecfb1f3b88cf69d0b0c74dfee879f3
Description:  Tools for Flash-Friendly File System (F2FS)

Package: f2fsck
Version: 1.13.0-1
Depends: libc, libf2fs6
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 73277
Filename: f2fsck_1.13.0-1_mipsel_mips32.ipk
Size: 74050
SHA256sum:8d1c2b8f78c8643663771a5d2385b9a4aa8430a3dbca21d47ccc8a1c6fc5d9ed
Description:  Utility for checking/repairing a Flash-Friendly File System (F2FS)

Package: fconfig
Version: 20080329-1
Depends: libc
Section: utils
Architecture: mipsel_mips32
Installed-Size: 7109
Filename: fconfig_20080329-1_mipsel_mips32.ipk
Size: 7852
SHA256sum:e07392fd8806a0e2a7d591d42f566cb97a2d6de25d007cc2e435d3c2e6702c3a
Description:  displays and (if writable) also edits the RedBoot configuration.

Package: fdisk
Version: 2.35.1-2
Depends: libc, libblkid1, libsmartcols1, libfdisk1, libncursesw6
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 52126
Filename: fdisk_2.35.1-2_mipsel_mips32.ipk
Size: 52813
SHA256sum:d684f0f311a852a838de5cbbba5c7fb6cc297a1e3b66083113687be0ada47b32
Description:  a menu-driven program for creation and manipulation of partition tables

Package: filefrag
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 5632
Filename: filefrag_1.45.6-1_mipsel_mips32.ipk
Size: 6334
SHA256sum:9f94dbba0e87aaac558e26d8a34a7da06eda081925974ab30c65ca18e385d315
Description:  Ext2 Filesystem file fragmentation report utility

Package: findfs
Version: 2.35.1-2
Depends: libc, libblkid1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 2430
Filename: findfs_2.35.1-2_mipsel_mips32.ipk
Size: 3243
SHA256sum:4c2248bf4f3106a85ea36ca18c1ff0547698db4f4a1827e53012f8b031c5ed01
Description:  findfs will search the disks in the system looking for a filesystem which has
 a label matching label or a UUID equal to uuid

Package: firewall
Version: 2019-11-22-8174814a-1
Depends: libc, libubox20191228, libubus20191227, libuci20130104, libip4tc2, libip6tc2, libxtables12, kmod-ipt-core, kmod-ipt-conntrack, kmod-nf-conntrack6, kmod-ipt-nat
License: ISC
Section: net
Architecture: mipsel_mips32
Installed-Size: 46719
Filename: firewall_2019-11-22-8174814a-1_mipsel_mips32.ipk
Size: 47457
SHA256sum:9e2eee2756d10008e8a362fda17e8265c95800efc1b2d403ac9722501760192a
Description:  This package provides a config-compatible C implementation of the UCI firewall.

Package: flock
Version: 2.35.1-2
Depends: libc, librt
Alternatives: 200:/usr/bin/flock:/usr/bin/util-linux-flock
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 10107
Filename: flock_2.35.1-2_mipsel_mips32.ipk
Size: 10925
SHA256sum:dec12ff935ce1c9becda8506212d9a3866961cb3d7ce1dd8b9a0766c02b68c7b
Description:  manages flock locks from within shell scripts or the command line

Package: fritz-caldata
Version: 1
Depends: libc, zlib
Section: utils
Architecture: mipsel_mips32
Installed-Size: 3093
Filename: fritz-caldata_1_mipsel_mips32.ipk
Size: 3764
SHA256sum:06473bdf12c7cf95864752d9430311bf9779e05c78dea80ec99903e6250b5acf
Description:  Utility to extract the zlib compress calibration data from flash.

Package: fritz-tffs-nand
Version: 1
Depends: libc
Section: utils
Architecture: mipsel_mips32
Installed-Size: 4316
Filename: fritz-tffs-nand_1_mipsel_mips32.ipk
Size: 4995
SHA256sum:888b14cfa8356170531d8396d7136396c4164749b2f145ac484f8b0fa5803dd7
Description:  Utility to partially read the TFFS filesystems on NAND flash.

Package: fritz-tffs
Version: 1
Depends: libc
Section: utils
Architecture: mipsel_mips32
Installed-Size: 3259
Filename: fritz-tffs_1_mipsel_mips32.ipk
Size: 3924
SHA256sum:d8ee0c5d8d53abdf8ac6c827b317e7ae635dc7504f1c844ea97f30e4bf812c69
Description:  Utility to partially read the TFFS filesystems.

Package: fstrim
Version: 2.35.1-2
Depends: libc, libblkid1, libuuid1, libsmartcols1, libmount1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 23925
Filename: fstrim_2.35.1-2_mipsel_mips32.ipk
Size: 24818
SHA256sum:e18596c6f731a89f5ad41740e389ec492168e2a5dd2fb3702cadd432bb554b20
Description:  fstrim is used on a mounted filesystem to discard (or "trim") blocks
 which are not in use by the filesystem.  This is useful for solid-
 state drives (SSDs) and thinly-provisioned storage.

Package: gdb
Version: 8.3.1-1
Depends: libc, zlib, libreadline8, libncurses6, zlib
License: GPL-3.0+
Section: devel
CPE-ID: cpe:/a:gnu:gdb
Architecture: mipsel_mips32
Installed-Size: 2333292
Filename: gdb_8.3.1-1_mipsel_mips32.ipk
Size: 2326047
SHA256sum:d3ba44051f9c8116252c7f7687137b6e9644d73f235cf66d14e438cde1fefb7c
Description:  GDB, the GNU Project debugger, allows you to see what is going on `inside'
 another program while it executes -- or what another program was doing at the
 moment it crashed.

Package: gdbserver
Version: 8.3.1-1
Depends: libc
License: GPL-3.0+
Section: devel
CPE-ID: cpe:/a:gnu:gdb
Architecture: mipsel_mips32
Installed-Size: 206155
Filename: gdbserver_8.3.1-1_mipsel_mips32.ipk
Size: 206444
SHA256sum:fa37c534c7f436d77d0c0f608d90f0d16aa38fff713444ea7a5a1fbecfb0824a
Description:  GDBSERVER is a program that allows you to run GDB on a different machine than the
 one which is running the program being debugged.

Package: genl
Version: 5.7.0-2
Depends: libc, libnl-tiny, libmnl0, libelf1
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 25205
Filename: genl_5.7.0-2_mipsel_mips32.ipk
Size: 25923
SHA256sum:c1c6e017019e2a9e8d5a6c38a14a09f48491823f64b1c4b3402a473fd1de4194
Description:  General netlink utility frontend

Package: getopt
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 4730
Filename: getopt_2.35.1-2_mipsel_mips32.ipk
Size: 5565
SHA256sum:17e0a2ee8b135b4248d075fa6413724efd95d95b6f24f04a2b8feec5011d5be0
Description:  getopt is used to break up (parse) options in command lines for easy parsing
 by shell procedures, and to check for legal options

Package: getrandom
Version: 2019-12-31-0e34af14-4
Depends: libc
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 1700
Filename: getrandom_2019-12-31-0e34af14-4_mipsel_mips32.ipk
Size: 2451
SHA256sum:1014bfc1996d0fa103680afd071b6558164d018ee51f7bbb388ff024acd73b97
Description:  OpenWrt getrandom system helper

Package: gre
Version: 12
Depends: libc, kmod-gre, kmod-gre6, resolveip
Provides: grev4, grev6
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 1573
Filename: gre_12_all.ipk
Size: 2364
SHA256sum:3fd1a57c91192a2d7686711f5152ea79f67276adcc9d67606a7de0ac7336bfd1
Description:  Generic Routing Encapsulation config support (IPv4 and IPv6) in /etc/config/network.

Package: hostapd-basic
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: hostapd
Provides: hostapd
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 261809
Filename: hostapd-basic_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 262440
SHA256sum:153d8403d5025d1d3f0dc8c6862f1444369d06a100128012705cb2fcf625b44b
Description:  This package contains a basic IEEE 802.1x/WPA Authenticator with WPA-PSK, 802.11r and 802.11w support.

Package: hostapd-common
Version: 2020-06-08-5a8b3662-2
Depends: libc
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 8600
Filename: hostapd-common_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 9368
SHA256sum:c5889f5d68f02d05ccec9217fb28dcdb849bc7c5f04aed85ba19ad73c6cfc457
Description:  hostapd/wpa_supplicant common support files

Package: hostapd-mini
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: hostapd, hostapd-basic
Provides: hostapd
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 232416
Filename: hostapd-mini_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 232905
SHA256sum:5c4c21cb75a8227c52a502469007fdf649587c41de0048970671f1c79f64d693
Description:  This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only).

Package: hostapd-openssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libopenssl1.1
Conflicts: hostapd, hostapd-basic, hostapd-mini
Provides: hostapd
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 384861
Filename: hostapd-openssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 384925
SHA256sum:d3d3143561f7e6bb2ae386036fc69bd1bd6789e6baf8afd5cd500407603b6097
Description:  This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
 Authenticator.

Package: hostapd-utils
Version: 2020-06-08-5a8b3662-2
Depends: libc
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 17222
Filename: hostapd-utils_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 18062
SHA256sum:a18d3934cad27c9a2b0cf68f94922c16d480076eecb2f98ef3e240c80e2fcc1b
Description:  This package contains a command line utility to control the
 IEEE 802.1x/WPA/EAP/RADIUS Authenticator.

Package: hostapd-wolfssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libwolfssl24
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl
Provides: hostapd
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 383037
Filename: hostapd-wolfssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 383117
SHA256sum:1458d79cc019b1614ccbd3134afe31e24a903b8d42cc0024c5f269341e46f3ed
Description:  This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
 Authenticator.

Package: hostapd
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 399348
Filename: hostapd_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 399787
SHA256sum:0a60476187af736dd5a92de8120450b77ea8c61a429a0f6815e68e82b96b9c1d
Description:  This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
 Authenticator.

Package: hwclock
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 34014
Filename: hwclock_2.35.1-2_mipsel_mips32.ipk
Size: 34801
SHA256sum:60aa15c9d06bd5bc0ffece0164f28347e9709572611e051afde3ef39ee6b4eee
Description:  hwclock is a tool for accessing the Hardware Clock

Package: ibt-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 118214
Filename: ibt-firmware_20200619-1_mipsel_mips32.ipk
Size: 118160
SHA256sum:c87f2d00128e8303de302adbea15df002a06fb42e43fd32b3090ba30a3a7fde2
Description:  Intel bluetooth firmware

Package: iconv
Version: 1.11.1-4
Depends: libc, libiconv-full2, libcharset1
License: LGPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 12009
Filename: iconv_1.11.1-4_mipsel_mips32.ipk
Size: 12707
SHA256sum:58ec9d4c0c574edaa4d883705e8458b661fc60e37f2af38f56f4dbd9b90cecd1
Description:  Character set conversion utility

Package: iftop
Version: 2018-10-03-77901c8c-1
Depends: libc, libpcap1, libncurses6, libpthread
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23216
Filename: iftop_2018-10-03-77901c8c-1_mipsel_mips32.ipk
Size: 23987
SHA256sum:359125b73dc903eb55ae5bda5d614a24e8753ccd311fc9488ed87d876746b808
Description:  iftop does for network usage what top(1) does for CPU usage. It 
 listens to network traffic on a named interface and displays a 
 table of current bandwidth usage by pairs of hosts. Handy for 
 answering the question 'why is our ADSL link so slow?'.

Package: igmpproxy
Version: 0.2.1-4
Depends: libc
License: GPL-2.0+
Section: net
Architecture: mipsel_mips32
Installed-Size: 16520
Filename: igmpproxy_0.2.1-4_mipsel_mips32.ipk
Size: 17348
SHA256sum:7a640a18d114a4bc484a0eb8b9cfb6f232d85190283e0a5b871ace19ecff4079
Description:  IGMPproxy is a simple dynamic Multicast Routing Daemon using
 only IGMP signalling (Internet Group Management Protocol).

Package: ip-bridge
Version: 5.7.0-2
Depends: libc, libnl-tiny, libmnl0, libelf1
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 25733
Filename: ip-bridge_5.7.0-2_mipsel_mips32.ipk
Size: 26467
SHA256sum:0cb32df05cbca1d47b5ebf060be7804774554e50847832eab2b38cc14b18419a
Description:  Bridge configuration utility from iproute2

Package: ip-full
Version: 5.7.0-2
Depends: libc, libnl-tiny, libelf1, libmnl0
Provides: ip
Alternatives: 300:/sbin/ip:/usr/libexec/ip-full
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 186429
Filename: ip-full_5.7.0-2_mipsel_mips32.ipk
Size: 186880
SHA256sum:f1298ac8427d4cbc782e6c79df9ebadf4405de4c9de5a80d16f84c9f9f1af486
Description:  Routing control utility (Full)

Package: ip-tiny
Version: 5.7.0-2
Depends: libc, libnl-tiny, libmnl0
Provides: ip
Alternatives: 200:/sbin/ip:/usr/libexec/ip-tiny
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 131183
Filename: ip-tiny_5.7.0-2_mipsel_mips32.ipk
Size: 131874
SHA256sum:4288307b3d9c89d65dc2d6fabedce0edbd0aeea31a50cf3328be613e6211d271
Description:  Routing control utility (Minimal)

Package: iperf3-ssl
Version: 3.7-1
Depends: libc, libopenssl1.1
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 47786
Filename: iperf3-ssl_3.7-1_mipsel_mips32.ipk
Size: 48378
SHA256sum:230b19117849ec04fad1eb4a9bcacc1dfa5b2de10dc21cba5012de631a4160a5
Description:  Internet Protocol bandwidth measuring tool with iperf_auth support

Package: iperf3
Version: 3.7-1
Depends: libc
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 44188
Filename: iperf3_3.7-1_mipsel_mips32.ipk
Size: 44989
SHA256sum:6224ec24874dcd1dd8e3f74a5cfe29f565ae8f3758825b99d947c9d5696d0b17
Description:  Iperf is a modern alternative for measuring TCP and UDP bandwidth
 performance, allowing the tuning of various parameters and
 characteristics.

Package: iperf
Version: 2.0.13-2
Depends: libc, uclibcxx, libpthread
License: BSD-3-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 48292
Filename: iperf_2.0.13-2_mipsel_mips32.ipk
Size: 48830
SHA256sum:726b42abc734c7b12d9ae4f9c5c33e68ef3a719a98a2fbf5b9b1dae9529a444f
Description:  Iperf is a modern alternative for measuring TCP and UDP bandwidth
 performance, allowing the tuning of various parameters and
 characteristics.

Package: ipip
Version: 3
Depends: libc, kmod-ipip, resolveip
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 893
Filename: ipip_3_all.ipk
Size: 1632
SHA256sum:698d0b90c31668b519077c3606ea5a69d8b962b6c10be66c3095698a8b6c6b9c
Description:  IP in IP Tunnel config support in /etc/config/network.

Package: ipset-dns
Version: 2017-10-08-ade2cf88-1
Depends: libc, libmnl0
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 4533
Filename: ipset-dns_2017-10-08-ade2cf88-1_mipsel_mips32.ipk
Size: 5550
SHA256sum:6baa2b55ea9a5a69fc3eb67209e36ddb13556e63750e50bda6bbaef4af8367f1
Description:  The ipset-dns daemon is a lightweight DNS forwarding server that adds all
 resolved IPs to a given netfilter ipset. It is designed to be used in
 conjunction with dnsmasq's upstream server directive.
 
 Practical use cases include routing over a given gateway traffic for
 particular web services or webpages that do not have a priori predictable
 IP addresses and instead rely on dizzying arrays of DNS resolutions.

Package: ipset
Version: 7.4-1
Depends: libc, kmod-ipt-ipset, libmnl0, libipset13
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 1396
Filename: ipset_7.4-1_mipsel_mips32.ipk
Size: 2151
SHA256sum:3f3fb13dd707248f92761536751c5e03f4e71cf3e5b5dfbb5989ce4dfafd2845
Description:  IPset administration utility

Package: iw-full
Version: 5.4-1
Depends: libc, libnl-tiny
Provides: iw
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 73791
Filename: iw-full_5.4-1_mipsel_mips32.ipk
Size: 74549
SHA256sum:2544835d07ae010b68be7518e837647c4d4212bb6e26ce30e3dcdbdac1ff3369
Description:  cfg80211 interface configuration utility (full version)

Package: iw
Version: 5.4-1
Depends: libc, libnl-tiny
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 38664
Filename: iw_5.4-1_mipsel_mips32.ipk
Size: 39444
SHA256sum:f8dee62b0b0aa1db6208c0a27660274ffb252b214e91bb879c08377e1800a2ab
Description:  cfg80211 interface configuration utility

Package: iwcap
Version: 1
Depends: libc
License: Apache-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 4662
Filename: iwcap_1_mipsel_mips32.ipk
Size: 5551
SHA256sum:a203c1c26bb9ba8acb004959acb0f096e1eea1cd8df36538d2b25db2076ab99a
Description:  The iwcap utility receives radiotap packet data from wifi monitor interfaces
 and outputs it to pcap format. It gathers recived packets in a fixed ring
 buffer to dump them on demand which is useful for background monitoring.
 Alternatively the utility can stream the data to stdout to act as remote
 capture drone for Wireshark or similar programs.

Package: iwl3945-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 63573
Filename: iwl3945-firmware_20200619-1_mipsel_mips32.ipk
Size: 64191
SHA256sum:0b49d2c3fb88ae0a0e3d7216d14cdb6d5fab216ff9932158ea35def618f4f784
Description:  Intel IWL3945 firmware

Package: iwl4965-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 78624
Filename: iwl4965-firmware_20200619-1_mipsel_mips32.ipk
Size: 79187
SHA256sum:d238a8816c0060ffa3103312059818358bfeba10e656c6c1cc4a7ad4ed1711b8
Description:  Intel IWL4965 firmware

Package: iwlwifi-firmware-iwl1000
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 176987
Filename: iwlwifi-firmware-iwl1000_20200619-1_mipsel_mips32.ipk
Size: 177633
SHA256sum:25d6a71852490bb687a833e1103bf27b2d468ba61c1baa40182400adc1bdac94
Description:  Intel Centrino Wireless-N 1000 firmware

Package: iwlwifi-firmware-iwl100
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 176990
Filename: iwlwifi-firmware-iwl100_20200619-1_mipsel_mips32.ipk
Size: 177645
SHA256sum:d0df1afa73c81a20249cf57571d0e96df990653ee0067754bdf1de0b86630a87
Description:  Intel Centrino Wireless-N 100 firmware

Package: iwlwifi-firmware-iwl105
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 332943
Filename: iwlwifi-firmware-iwl105_20200619-1_mipsel_mips32.ipk
Size: 333267
SHA256sum:37780513dc783fc01f22d5fbea5e0db35c2b50e16ce41ccaa9113f12c5d3587a
Description:  Intel Centrino Wireless-N 105 firmware

Package: iwlwifi-firmware-iwl135
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 341797
Filename: iwlwifi-firmware-iwl135_20200619-1_mipsel_mips32.ipk
Size: 341985
SHA256sum:9fa1cf755cc2b82f2fc38fd798d229c91980b50fe6ee5b3527ae4bb40242a1d3
Description:  Intel Centrino Wireless-N 135 firmware

Package: iwlwifi-firmware-iwl2000
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 338716
Filename: iwlwifi-firmware-iwl2000_20200619-1_mipsel_mips32.ipk
Size: 339071
SHA256sum:2bd39ad3ef044e98b6959832c12adecf80fc631e9b76b1d48bf49828914c574d
Description:  Intel Centrino Wireless-N 2200 firmware

Package: iwlwifi-firmware-iwl2030
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 347310
Filename: iwlwifi-firmware-iwl2030_20200619-1_mipsel_mips32.ipk
Size: 347750
SHA256sum:6cedb19d92bc1733bfcf850d3a028e0077c1437844618b16ae1aba96432cd798
Description:  Intel Centrino Wireless-N 2230 firmware

Package: iwlwifi-firmware-iwl3160
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 466128
Filename: iwlwifi-firmware-iwl3160_20200619-1_mipsel_mips32.ipk
Size: 466181
SHA256sum:cdf255c3cdcdc72a12ba84be15846957049f85895e3344585bd4b85e02c6b116
Description:  Intel Wireless 3160 firmware

Package: iwlwifi-firmware-iwl3168
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 451261
Filename: iwlwifi-firmware-iwl3168_20200619-1_mipsel_mips32.ipk
Size: 451026
SHA256sum:6134cc5a01c0303313d10a2e7a5355d7b4907bffbca327d7bece72501d9b60b7
Description:  Intel Wireless 3168 firmware

Package: iwlwifi-firmware-iwl5000
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 177063
Filename: iwlwifi-firmware-iwl5000_20200619-1_mipsel_mips32.ipk
Size: 177776
SHA256sum:0afc2befe2575d1a29222b69e53d9608a6ceb67288cedf8df5ff3c54d301e52f
Description:  Intel Wireless 5100AGN 5300AGN and 5350AGN firmware

Package: iwlwifi-firmware-iwl5150
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 174129
Filename: iwlwifi-firmware-iwl5150_20200619-1_mipsel_mips32.ipk
Size: 174779
SHA256sum:2afca67e69c4b38c68cd6f2e820418589c9ac5f51e8bb2385c7deeb845497660
Description:  Intel Wireless Wi-Fi 5150AGN firmware

Package: iwlwifi-firmware-iwl6000g2
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 212878
Filename: iwlwifi-firmware-iwl6000g2_20200619-1_mipsel_mips32.ipk
Size: 213347
SHA256sum:134269befde74c845c3d7411916a1b863c819a3f8cc319f341cf5e13ed8b2a61
Description:  Intel Centrino 6300 and 6200 firmware

Package: iwlwifi-firmware-iwl6000g2a
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 324147
Filename: iwlwifi-firmware-iwl6000g2a_20200619-1_mipsel_mips32.ipk
Size: 324197
SHA256sum:9fb5ed186fbf1aebcb0105d11d3f2829c66f3adad565b47892a6cc4ac2ceb4e3
Description:  Intel Centrino 6205 firmware

Package: iwlwifi-firmware-iwl6000g2b
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 327878
Filename: iwlwifi-firmware-iwl6000g2b_20200619-1_mipsel_mips32.ipk
Size: 328062
SHA256sum:6954c220196754f30e33728e6235298f1ce2692ffd45d9f9e53da0e8e0f1f5db
Description:  Intel Centrino 6230 1030 130 and 6235 firmware

Package: iwlwifi-firmware-iwl6050
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 219215
Filename: iwlwifi-firmware-iwl6050_20200619-1_mipsel_mips32.ipk
Size: 219586
SHA256sum:e4a0ffe18d7a304ce95c12fb2be929d00f4a2cc10254a7febecb78b1478fd083
Description:  Intel Centrino 6150 and 6250 firmware

Package: iwlwifi-firmware-iwl7260
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 492759
Filename: iwlwifi-firmware-iwl7260_20200619-1_mipsel_mips32.ipk
Size: 492601
SHA256sum:c9347590c2f304e9f7dfeee7a4f2f6b1ce493e0cda66b1a7041d5e43abb48be5
Description:  Intel Wireless 7260 firmware

Package: iwlwifi-firmware-iwl7265
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 534257
Filename: iwlwifi-firmware-iwl7265_20200619-1_mipsel_mips32.ipk
Size: 533739
SHA256sum:1a4c12a61f2898f618987c4d806b3a21f6b5e6560905265fe82fee76af44a4b1
Description:  Intel Wireless 7265 firmware

Package: iwlwifi-firmware-iwl7265d
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 463127
Filename: iwlwifi-firmware-iwl7265d_20200619-1_mipsel_mips32.ipk
Size: 462780
SHA256sum:da97f4920dd9ff87188bae36e095478d1c9e742ad3d8b4c15432c076f7f1d0ae
Description:  Intel Wireless 7265D and 3165 firmware

Package: iwlwifi-firmware-iwl8260c
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 951520
Filename: iwlwifi-firmware-iwl8260c_20200619-1_mipsel_mips32.ipk
Size: 949431
SHA256sum:46f35fb52054f30334d7021f23850924a1263dd1164e181695a4459b8dd059d8
Description:  Intel Wireless 8260 and 4165 firmware

Package: iwlwifi-firmware-iwl8265
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 958331
Filename: iwlwifi-firmware-iwl8265_20200619-1_mipsel_mips32.ipk
Size: 956515
SHA256sum:e14ec10ef01a0a528965628d3891261f144b80d2c374fcf04d628f5fb8d2cfdc
Description:  Intel Wireless 8265 firmware

Package: iwlwifi-firmware-iwl9000
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 621129
Filename: iwlwifi-firmware-iwl9000_20200619-1_mipsel_mips32.ipk
Size: 620185
SHA256sum:5204a754c3ad9fe06132208aaa48e83070f65efd36316d2de1837073a73e1d7f
Description:  Intel Wireless 9000 firmware

Package: iwlwifi-firmware-iwl9260
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 618130
Filename: iwlwifi-firmware-iwl9260_20200619-1_mipsel_mips32.ipk
Size: 617298
SHA256sum:12666d00eab60e596ec7115d581b383cb6e24642d3df23b069cc9ffb306f7921
Description:  Intel Wireless 9260 firmware

Package: jansson
Version: 2.12-1
Depends: libc
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 21631
Filename: jansson_2.12-1_mipsel_mips32.ipk
Size: 22319
SHA256sum:c5728c35246ba7e0c984520dfbd83d3905099bd39ff43bebf9f416d90f141de0
Description:  Jansson is a C library for encoding, decoding and manipulating JSON data

Package: jshn
Version: 2020-07-11-f4e9bf73-1
Depends: libc, libjson-c5, libubox20191228, libblobmsg-json
License: ISC
Section: utils
Architecture: mipsel_mips32
Installed-Size: 6470
Filename: jshn_2020-07-11-f4e9bf73-1_mipsel_mips32.ipk
Size: 7255
SHA256sum:fb67d1a0be3217b9ac5957e468b9aa38eb952e439d4e4dbda678b390e90e5f29
Description:  Library for parsing and generating JSON from shell scripts

Package: jsonfilter
Version: 2018-02-04-c7e938d6-1
Depends: libc, libubox20191228, libjson-c5
License: ISC
Section: base
Architecture: mipsel_mips32
Installed-Size: 9842
Filename: jsonfilter_2018-02-04-c7e938d6-1_mipsel_mips32.ipk
Size: 10588
SHA256sum:e31031084a880ec2a580a971293262017697173a20e5e862b94befaa8a48bae8
Description:  OpenWrt JSON filter utility

Package: libasm1
Version: 0.179-1
Depends: libc, libelf1, libdw1
Provides: libasm
License: GPL-3.0-or-later
Section: libs
CPE-ID: cpe:/a:elfutils_project:elfutils
Architecture: mipsel_mips32
Installed-Size: 11704
Filename: libasm1_0.179-1_mipsel_mips32.ipk
Size: 12512
SHA256sum:3fa13f41ea56ff9bbfa5680855d09445d6ff54ebe7a1dc9ca47d59b12be6e3e9
Description:  ELF manipulation libraries (libasm)

Package: libbfd
Version: 2.27-1
Depends: libc, zlib
License: GPL-3.0+
Section: libs
CPE-ID: cpe:/a:gnu:binutils
Architecture: mipsel_mips32
Installed-Size: 430929
Filename: libbfd_2.27-1_mipsel_mips32.ipk
Size: 427276
SHA256sum:d123ad9f983d4bfa3be774ce2f4aba2a2278e66a92d4da51c814807f07d71455
Description:  libbfd

Package: libblkid1
Version: 2.35.1-2
Depends: libc, libuuid1
Provides: libblkid
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 127444
Filename: libblkid1_2.35.1-2_mipsel_mips32.ipk
Size: 128117
SHA256sum:adbb8f33b8bbf73a35697b92ba2f6d40df05f927b1fc101ae1c4699987b4c54b
Description:  The libblkid library is used to identify block devices (disks) as to their
 content (e.g. filesystem type, partitions) as well as extracting additional
 information such as filesystem labels/volume names, partitions, unique
 identifiers/serial numbers...

Package: libblobmsg-json
Version: 2020-07-11-f4e9bf73-1
Depends: libc, libjson-c5, libubox20191228
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 4290
Filename: libblobmsg-json_2020-07-11-f4e9bf73-1_mipsel_mips32.ipk
Size: 5000
SHA256sum:193b8b0651da5daa552e3fea034f16b7b1a57de118406e2c70278031e80b3cd5
Description:  blobmsg <-> json conversion library

Package: libbsd0
Version: 0.10.0-1
Depends: libc
Provides: libbsd
License: BSD-4-Clause
Section: libs
Architecture: mipsel_mips32
Installed-Size: 45742
Filename: libbsd0_0.10.0-1_mipsel_mips32.ipk
Size: 46105
SHA256sum:35abd0b0b94f915df9d4f9a8e11949a000aa9fa091fdedc1250016ab5ece8ee0
Description:  This library provides useful functions commonly found on BSD systems, and lacking on others like GNU systems, thus making it easier to port projects with strong BSD origins, without needing to embed the same code over and over again on each project.

Package: libbz2-1.0
Version: 1.0.8-1
Depends: libc
Provides: libbz2
License: bzip2-1.0.8
Section: libs
CPE-ID: cpe:/a:bzip:bzip2
Architecture: mipsel_mips32
Installed-Size: 25423
Filename: libbz2-1.0_1.0.8-1_mipsel_mips32.ipk
Size: 26200
SHA256sum:3cc3d89a686dfb8ac35846ac9dacf422ad0561cdac0ea281063ac03b92fe2834
Description:  bzip2 is a freely available, patent free, high-quality
 data compressor. This packages provides libbz2 library.

Package: libcharset1
Version: 1.11.1-4
Depends: libc
Provides: libcharset
License: LGPL-2.0
Section: libs
Architecture: mipsel_mips32
Installed-Size: 2453
Filename: libcharset1_1.11.1-4_mipsel_mips32.ipk
Size: 3194
SHA256sum:76825cd8c132c09bdf9909b798b799b6432d93ded8f133c2c14d3fb244920547
Description:  Character set conversion library

Package: libcomerr0
Version: 1.45.6-1
Depends: libc, libuuid1
Provides: libcomerr
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 3704
Filename: libcomerr0_1.45.6-1_mipsel_mips32.ipk
Size: 4450
SHA256sum:15bb5c4d00ee810332842a0c86bb86067cd117436a483fd19d074b3f6b45d1a4
Description:  This package contains libcom_err, the common error description library
 bundled with e2fsprogs.

Package: libcurl4
Version: 7.71.1-1
Depends: libc, libmbedtls12, ca-bundle
Provides: libcurl
License: MIT
Section: libs
CPE-ID: cpe:/a:haxx:libcurl
Architecture: mipsel_mips32
Installed-Size: 137210
Filename: libcurl4_7.71.1-1_mipsel_mips32.ipk
Size: 137925
SHA256sum:3f8fdbdc6bf18bef497d2a2968eb3740730cb3950d9a03b2b32719a68a1691a5
Description:  A client-side URL transfer library

Package: libcxx
Version: 9.0.1-4
Depends: libc, libatomic1, libpthread
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 239041
Filename: libcxx_9.0.1-4_mipsel_mips32.ipk
Size: 238446
SHA256sum:3c2d04fee6bd98d1d219776652ba0ed9f31630387f2a256df5da2310a275c6f2
Description:  LLVM C++ library targeting C++11 and above

Package: libdw1
Version: 0.179-1
Depends: libc, libelf1, libbz2-1.0
Provides: libdw
License: GPL-3.0-or-later
Section: libs
CPE-ID: cpe:/a:elfutils_project:elfutils
Architecture: mipsel_mips32
Installed-Size: 229221
Filename: libdw1_0.179-1_mipsel_mips32.ipk
Size: 228497
SHA256sum:3c12b53ee3231b87808c6a33f2ccef6b954ded8b53cfdf1716c6c641680d3fc8
Description:  ELF manipulation libraries (libdw)

Package: libelf1
Version: 0.179-1
Depends: libc, zlib
Provides: libelf, libelf1-1
License: GPL-3.0-or-later
Section: libs
CPE-ID: cpe:/a:elfutils_project:elfutils
Architecture: mipsel_mips32
Installed-Size: 42586
Filename: libelf1_0.179-1_mipsel_mips32.ipk
Size: 43391
SHA256sum:1b09c24aee6ddb333facc576d773a248d93229f2d80971d92abcb4deb2249d83
Description:  ELF manipulation libraries (libelf)

Package: libertas-sdio-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 348543
Filename: libertas-sdio-firmware_20200619-1_mipsel_mips32.ipk
Size: 349430
SHA256sum:ab23d75d1d279a4742403fb70f3f2b25cff9e23eecbab10dac7bae8de609146d
Description:  Marvell 8385/8686/8688 SDIO firmware

Package: libertas-spi-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 92245
Filename: libertas-spi-firmware_20200619-1_mipsel_mips32.ipk
Size: 93049
SHA256sum:55a3df85c69f79733965167f26270e4d8415423177ce9e6bf8c9fb696ba3b0e3
Description:  Marvell 8686 SPI firmware

Package: libertas-usb-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 216575
Filename: libertas-usb-firmware_20200619-1_mipsel_mips32.ipk
Size: 217294
SHA256sum:efb2c80bf4f84e6606dafa829bc1f57ad915a6f6ecf0d7a1a2f71098e0bbaf70
Description:  Marvell 8388/8682 USB firmware

Package: libevent2-7
Version: 2.1.11-2
Depends: libc
Provides: libevent2
License: BSD-3-Clause
Section: libs
CPE-ID: cpe:/a:libevent_project:libevent
Architecture: mipsel_mips32
Installed-Size: 102877
Filename: libevent2-7_2.1.11-2_mipsel_mips32.ipk
Size: 103971
SHA256sum:7df645215cf96e11d8ad9cc6bff2d6e70793bdbbccb61d6fbc51351c695da468
Description:  The libevent API provides a mechanism to execute a callback function
 when a specific event occurs on a file descriptor or after a timeout
 has been reached. Furthermore, libevent also support callbacks due
 to signals or regular timeouts.
 
 libevent is meant to replace the event loop found in event driven
 network servers. An application just needs to call event_dispatch()
 and then add or remove events dynamically without having to change
 the event loop.
 
 This package contains the libevent shared library historically
 containing both the core & extra libraries.

Package: libevent2-core7
Version: 2.1.11-2
Depends: libc
Provides: libevent2-core
License: BSD-3-Clause
Section: libs
CPE-ID: cpe:/a:libevent_project:libevent
Architecture: mipsel_mips32
Installed-Size: 59079
Filename: libevent2-core7_2.1.11-2_mipsel_mips32.ipk
Size: 60197
SHA256sum:337cf105639ae31a62d9d206c55e03b13448354d0ba364094e322bbea0c2b5f1
Description:  The libevent API provides a mechanism to execute a callback function
 when a specific event occurs on a file descriptor or after a timeout
 has been reached. Furthermore, libevent also support callbacks due
 to signals or regular timeouts.
 
 libevent is meant to replace the event loop found in event driven
 network servers. An application just needs to call event_dispatch()
 and then add or remove events dynamically without having to change
 the event loop.
 
 This package contains the libevent core shared library for the event,
 buffer & utility functions.

Package: libevent2-extra7
Version: 2.1.11-2
Depends: libc, libevent2-core7
Provides: libevent2-extra
License: BSD-3-Clause
Section: libs
CPE-ID: cpe:/a:libevent_project:libevent
Architecture: mipsel_mips32
Installed-Size: 45702
Filename: libevent2-extra7_2.1.11-2_mipsel_mips32.ipk
Size: 46788
SHA256sum:e0d1c91496f638870b246ef3ae48d72732eff06ed88eb44788e38eafb1c605ff
Description:  The libevent API provides a mechanism to execute a callback function
 when a specific event occurs on a file descriptor or after a timeout
 has been reached. Furthermore, libevent also support callbacks due
 to signals or regular timeouts.
 
 libevent is meant to replace the event loop found in event driven
 network servers. An application just needs to call event_dispatch()
 and then add or remove events dynamically without having to change
 the event loop.
 
 This package contains the libevent extra shared library for specific
 protocols including HTTP, DNS & RPC.

Package: libevent2-openssl7
Version: 2.1.11-2
Depends: libc, libopenssl1.1, libevent2-core7
Provides: libevent2-openssl
License: BSD-3-Clause
Section: libs
CPE-ID: cpe:/a:libevent_project:libevent
Architecture: mipsel_mips32
Installed-Size: 8057
Filename: libevent2-openssl7_2.1.11-2_mipsel_mips32.ipk
Size: 9151
SHA256sum:d9f68b4bf06ef99273a865c61e79cd608a4f16104f7cc72c11ba7ec8ab9e4aa4
Description:  The libevent API provides a mechanism to execute a callback function
 when a specific event occurs on a file descriptor or after a timeout
 has been reached. Furthermore, libevent also support callbacks due
 to signals or regular timeouts.
 
 libevent is meant to replace the event loop found in event driven
 network servers. An application just needs to call event_dispatch()
 and then add or remove events dynamically without having to change
 the event loop.
 
 This package contains the libevent OpenSSL shared library for encrypted
 bufferevents.

Package: libevent2-pthreads7
Version: 2.1.11-2
Depends: libc, libpthread, libevent2-core7
Provides: libevent2-pthreads
License: BSD-3-Clause
Section: libs
CPE-ID: cpe:/a:libevent_project:libevent
Architecture: mipsel_mips32
Installed-Size: 1887
Filename: libevent2-pthreads7_2.1.11-2_mipsel_mips32.ipk
Size: 2966
SHA256sum:bf6bf24f566da850137650b656e95ebfaa0a8c907a48623628906247827412ac
Description:  The libevent API provides a mechanism to execute a callback function
 when a specific event occurs on a file descriptor or after a timeout
 has been reached. Furthermore, libevent also support callbacks due
 to signals or regular timeouts.
 
 libevent is meant to replace the event loop found in event driven
 network servers. An application just needs to call event_dispatch()
 and then add or remove events dynamically without having to change
 the event loop.
 
 This package contains the libevent Pthreads shared library for
 threading & locking.

Package: libext2fs2
Version: 1.45.6-1
Depends: libc, libuuid1, libblkid1, libss2, libcomerr0
Provides: libext2fs
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 183372
Filename: libext2fs2_1.45.6-1_mipsel_mips32.ipk
Size: 183876
SHA256sum:b998fd977be8374de237918f95095532b1b55f6b0e13a14443b340ef18353b8d
Description:  libext2fs is a library which can access ext2, ext3 and ext4 filesystems.

Package: libf2fs6
Version: 1.13.0-1
Depends: libc, libuuid1
Provides: libf2fs
License: GPL-2.0
Section: libs
Architecture: mipsel_mips32
Installed-Size: 38675
Filename: libf2fs6_1.13.0-1_mipsel_mips32.ipk
Size: 39354
SHA256sum:05d95589e33f7b935bf2fe6b84a1bee85f4d094b37826744968fe797f18c05d0
Description:  Library for Flash-Friendly File System (F2FS) tools

Package: libfdisk1
Version: 2.35.1-2
Depends: libc, libuuid1, libblkid1
Provides: libfdisk
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 159476
Filename: libfdisk1_2.35.1-2_mipsel_mips32.ipk
Size: 160039
SHA256sum:2600f0a655bb311ffd13b4433afca49793ba76f42d474a07d920d4208ba48249
Description:  The libfdisk library is used for manipulating with partition tables.

Package: libgmp10
Version: 6.1.2-2
Depends: libc
Provides: libgmp
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 211816
Filename: libgmp10_6.1.2-2_mipsel_mips32.ipk
Size: 212636
SHA256sum:d2fba4a542c7a7fd9c71a93b5af8fbec1aec8ce57e4d1280046519c6cdb8ef14
Description:  GMP is a free library for arbitrary precision arithmetic, operating on
 signed integers, rational numbers, and floating point numbers.

Package: libiconv-full2
Version: 1.11.1-4
Depends: libc
Provides: libiconv-full
License: LGPL-2.0
Section: libs
Architecture: mipsel_mips32
Installed-Size: 12047
Filename: libiconv-full2_1.11.1-4_mipsel_mips32.ipk
Size: 12820
SHA256sum:e9e82e53c2e5d8a2f591ba548c349f949ce06e76fa32e453b66bd80342502288
Description:  Character set conversion library

Package: libiconv
Version: 8
Depends: libc
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 161
Filename: libiconv_8_mipsel_mips32.ipk
Size: 903
SHA256sum:c93e2075afd7a4d2adf17182a45fc915e65a3041e187ffaf46a0646c28f9f13a
Description:  Tiny drop-in replacement for the GNU Character set conversion library

Package: libintl-full8
Version: 0.19.8.1-2
Depends: libc
Provides: libintl-full
License: GPL-3.0+
Section: libs
CPE-ID: cpe:/a:gnu:gettext
Architecture: mipsel_mips32
Installed-Size: 16633
Filename: libintl-full8_0.19.8.1-2_mipsel_mips32.ipk
Size: 17400
SHA256sum:55f121c08fcc409a1cc8dd3e4933ac1489276c4006a9d1a105554256c9a67627
Description:  GNU Internationalization library

Package: libintl
Version: 2
Depends: libc
License: FSFULLR
Section: libs
Architecture: mipsel_mips32
Installed-Size: 159
Filename: libintl_2_mipsel_mips32.ipk
Size: 889
SHA256sum:e4763921f564cf9f7ceee2fc73e0e84163c01640d9d6af8d4268b7ca38855a6d
Description:  Stub header for the GNU Internationalization library

Package: libipset13
Version: 7.4-1
Depends: libc, kmod-ipt-ipset, libmnl0
Provides: libipset
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 42749
Filename: libipset13_7.4-1_mipsel_mips32.ipk
Size: 43372
SHA256sum:757826246fc3c3c10157b34890ab8c816086a3122a93e4e3d409e2660344dcde
Description:  IPset administration utility

Package: libiw29
Version: 29-6
Depends: libc
Provides: libiw
License: GPL-2.0
Section: libs
Architecture: mipsel_mips32
Installed-Size: 12119
Filename: libiw29_29-6_mipsel_mips32.ipk
Size: 12900
SHA256sum:62353d64d5146d7809de9ee120a4dffba0238aa482c709f452dd63825e738a1c
Description:  This package contains a library for manipulating
 "Linux Wireless Extensions".

Package: libjson-c5
Version: 0.14-1
Depends: libc
Provides: libjson-c
License: MIT
Section: libs
CPE-ID: cpe:/a:json-c_project:json-c
Architecture: mipsel_mips32
Installed-Size: 24977
Filename: libjson-c5_0.14-1_mipsel_mips32.ipk
Size: 25704
SHA256sum:05f20e4da8d183ebc43ee201296389dc9cc09bcc507aaf458ebfd88979c8d7f9
Description:  This package contains a library for javascript object notation backends.

Package: libjson-script
Version: 2020-07-11-f4e9bf73-1
Depends: libc, libubox20191228
License: ISC
Section: utils
Architecture: mipsel_mips32
Installed-Size: 5533
Filename: libjson-script_2020-07-11-f4e9bf73-1_mipsel_mips32.ipk
Size: 6254
SHA256sum:1c5953af3c04956bf0f29f84ff933f138bad08ca89fc3e0fbe67e13b78ce4b0c
Description:  Minimalistic JSON based scripting engine

Package: libltdl7
Version: 2.4.6-2
Depends: libc
Provides: libltdl
License: GPL-2.0+
Section: libs
CPE-ID: cpe:/a:gnu:libtool
Architecture: mipsel_mips32
Installed-Size: 13204
Filename: libltdl7_2.4.6-2_mipsel_mips32.ipk
Size: 13931
SHA256sum:4da2cdd2791cfa6a99ae20f8491773befcdae1ba92b74f60ea6f0ea826129330
Description:  A generic dynamic object loading library

Package: liblua5.1.5
Version: 5.1.5-7
Depends: libc
Provides: liblua
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 77211
Filename: liblua5.1.5_5.1.5-7_mipsel_mips32.ipk
Size: 77941
SHA256sum:5c046f619d78a2b602647814fcfe777f19184e6ef19dc3a396eb292ad443dc88
Description:  Lua is a powerful light-weight programming language designed for extending 
 applications. Lua is also frequently used as a general-purpose, stand-alone 
 language. Lua is free software.
 This package contains the Lua shared libraries, needed by other programs.

Package: liblua5.3-5.3
Version: 5.3.5-4
Depends: libc
Provides: liblua5.3
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 97217
Filename: liblua5.3-5.3_5.3.5-4_mipsel_mips32.ipk
Size: 97841
SHA256sum:c54de28a3177fffca14fd048a4fac57f983a6ab71641a1eab0b17b781364bf19
Description:  
 This package contains the Lua shared libraries, needed by other programs.

Package: liblzo2
Version: 2.10-4
Depends: libc
Provides: liblzo
License: GPL-2.0-or-later
Section: libs
Architecture: mipsel_mips32
Installed-Size: 36891
Filename: liblzo2_2.10-4_mipsel_mips32.ipk
Size: 37655
SHA256sum:0bd83a98ef943afbcd66fcdcc4724bc95a288d064a2d22839c0b7f45f6effe17
Description:  LZO is a data compression library which is suitable for data de-/compression
 in real-time. This means it favours speed over compression ratio.

Package: libmbedtls12
Version: 2.16.6-1
Depends: libc
Provides: libmbedtls
License: GPL-2.0-or-later
Section: libs
CPE-ID: cpe:/a:arm:mbed_tls
Architecture: mipsel_mips32
Installed-Size: 181270
Filename: libmbedtls12_2.16.6-1_mipsel_mips32.ipk
Size: 181755
SHA256sum:f778402f86729a408dfef5ce825f1c596c55d36c2ffa6e8e06eb0d21cd80baca
Description:  The aim of the mbedtls project is to provide a quality, open-source
 cryptographic library written in C and targeted at embedded systems.
 This package contains the mbedtls library.

Package: libmnl0
Version: 1.0.4-2
Depends: libc
Provides: libmnl
License: LGPL-2.1+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 5659
Filename: libmnl0_1.0.4-2_mipsel_mips32.ipk
Size: 6862
SHA256sum:4127a4000012285fc344fdf7b40e1044afcac4418b1af4227d4ad38865d56187
Description:  libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel. The main features of this library are:
 .
 * Small: the shared library requires around 30KB for an x86-based computer.
 .
 * Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 * Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building, validating,
 parsing and sequence tracking, easier.
 .
 * Easy to re-use: you can use the library to build your own abstraction layer
 on top of this library.
 .
 * Decoupling: the interdependency of the main bricks that compose the library
 is reduced, i.e. the library provides many helpers, but the programmer is not
 forced to use them.

Package: libmount1
Version: 2.35.1-2
Depends: libc, libblkid1
Provides: libmount
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 131857
Filename: libmount1_2.35.1-2_mipsel_mips32.ipk
Size: 132557
SHA256sum:6025bbf30de6f7255bf3c1b0f694ebb4174a05cf8d74466199f6a97fe99c491a
Description:  The libmount library is used to parse /etc/fstab, /etc/mtab and
 /proc/self/mountinfo files, manage the mtab file, evaluate mount options...

Package: libncurses-dev
Version: 6.2-1
Depends: libc, zlib
License: MIT
Section: devel
Architecture: mipsel_mips32
Installed-Size: 293122
Filename: libncurses-dev_6.2-1_mipsel_mips32.ipk
Size: 291396
SHA256sum:45db72b9d83bc43d86a3483e89070b078298eee53a2efc8bf2aa2c274071def5
Description:  Development files for the ncurses library

Package: libncurses6
Version: 6.2-1
Depends: libc, terminfo
Provides: libncursesw, libncurses, libncursesw6
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 163820
Filename: libncurses6_6.2-1_mipsel_mips32.ipk
Size: 161893
SHA256sum:7aef731ef1e6ec1fcb1bfd2956393c5f1c8fd670ee3532b37d4764d420b0adca
Description:  Terminal handling library (Unicode)

Package: libnetfilter-conntrack3
Version: 2018-05-01-3ccae9f5-2
Depends: libc, libnfnetlink0, kmod-nf-conntrack-netlink, libmnl0
Provides: libnetfilter-conntrack
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 36604
Filename: libnetfilter-conntrack3_2018-05-01-3ccae9f5-2_mipsel_mips32.ipk
Size: 37468
SHA256sum:37be6badb3afce80d4f2ab74d4863cc2929294ae48d1a50e2a3ce7d72f8a906e
Description:  libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table. The
 library libnetfilter_conntrack has been previously known as
 libnfnetlink_conntrack and libctnetlink. This library is currently
 used by conntrack-tools among many other applications.

Package: libnetfilter-cthelper0
Version: 1.0.0-2
Depends: libc, libmnl0
Provides: libnetfilter-cthelper
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 3872
Filename: libnetfilter-cthelper0_1.0.0-2_mipsel_mips32.ipk
Size: 4650
SHA256sum:275491b9df9675924341394c32949f466b2718be9871bef04369f18fd49f0d7f
Description:  libnetfilter_cthelper is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking helpers. 
 This library is currently used by conntrack-tools.

Package: libnetfilter-cttimeout1
Version: 1.0.0-2
Depends: libc, libmnl0
Provides: libnetfilter-cttimeout
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 4073
Filename: libnetfilter-cttimeout1_1.0.0-2_mipsel_mips32.ipk
Size: 4863
SHA256sum:0dfaaca7accd4605a3650447c0cebf4b4acadd0664135108b5ca38f00a015461
Description:  libnetfilter_cttimeout is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking timeout handling.
 This library is currently used by conntrack-tools.

Package: libnetfilter-log1
Version: 1.0.1-2
Depends: libc, libnfnetlink0, kmod-nfnetlink-log, libmnl0
Provides: libnetfilter-log
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 4134
Filename: libnetfilter-log1_1.0.1-2_mipsel_mips32.ipk
Size: 4989
SHA256sum:455a42872bd9fb219e8c926a649f3f3573b916569616ea666807e8d9c4233580
Description:  libnetfilter_log is a userspace library providing interface to packets that
 have been logged by the kernel packet filter. It is is part of a system that
 deprecates the old syslog/dmesg based packet logging. This library has been
 previously known as libnfnetlink_log.

Package: libnetfilter-queue1
Version: 2017-06-27-601abd1c-2
Depends: libc, libmnl0, libnfnetlink0
Provides: libnetfilter-queue
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 8447
Filename: libnetfilter-queue1_2017-06-27-601abd1c-2_mipsel_mips32.ipk
Size: 9233
SHA256sum:145eb998884e8eee45570dc3879b1ccb6f0f4a1153983b54269185886f5c4fb4
Description:  libnetfilter_queue is a userspace library providing a programming
 interface (API) to packets that have been queued by the kernel
 packet filter.

Package: libnettle7
Version: 3.5.1-2
Depends: libc, libgmp10
Provides: libnettle
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 257368
Filename: libnettle7_3.5.1-2_mipsel_mips32.ipk
Size: 257343
SHA256sum:17d80820016bedb3093d430a70cfe109037692ab46aaf9d00bab2e8f2f74ba41
Description:  GNU crypto library

Package: libnfnetlink0
Version: 1.0.1-3
Depends: libc
Provides: libnfnetlink
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 9251
Filename: libnfnetlink0_1.0.1-3_mipsel_mips32.ipk
Size: 10130
SHA256sum:54788e8ba5e3415787ea23d43e5186f025e4689734781973ac3ff835a8860410
Description:  libnfnetlink is is the low-level library for netfilter related kernel/userspace communication.
 It provides a generic messaging infrastructure for in-kernel netfilter subsystems
 (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users
 and/or management tools in userspace.

Package: libnftnl12
Version: 1.1.5-1
Depends: libc, libmnl0
Provides: libnftnl
License: GPL-2.0+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 48445
Filename: libnftnl12_1.1.5-1_mipsel_mips32.ipk
Size: 49175
SHA256sum:dc0fb8a42c59ed1f87a55be19f5a46eb41d8c18ed6d63cfb8c81ce74dd36734c
Description:  libnftnl is a userspace library providing a low-level netlink
 programming interface (API) to the in-kernel nf_tables subsystem.

Package: libnghttp2-14
Version: 1.41.0-1
Depends: libc
Provides: libnghttp2
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 61932
Filename: libnghttp2-14_1.41.0-1_mipsel_mips32.ipk
Size: 61567
SHA256sum:9bd3be59bad04834de4b710e95f70f376057eb9ec10f25d2fef87d0bf1fbb5cb
Description:  C library implementing the framing layer of the HTTP/2 protocol. It can be used to build a HTTP/2-capable HTTP client or server

Package: libnl-core200
Version: 3.5.0-1
Depends: libc, libpthread
Provides: libnl-core
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 36942
Filename: libnl-core200_3.5.0-1_mipsel_mips32.ipk
Size: 37515
SHA256sum:91de2e6bfda936acf7c336ba9ec6c03d3449631afa13547ee501c6ca344ec227
Description:  Common code for all netlink libraries

Package: libnl-genl200
Version: 3.5.0-1
Depends: libc, libnl-core200
Provides: libnl-genl
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 7420
Filename: libnl-genl200_3.5.0-1_mipsel_mips32.ipk
Size: 8127
SHA256sum:31199bba44c44aa2248ca252227382f60e87d53321b65b982e495cce973b8cdc
Description:  Generic Netlink Library Functions

Package: libnl-nf200
Version: 3.5.0-1
Depends: libc, libnl-route200
Provides: libnl-nf
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 23431
Filename: libnl-nf200_3.5.0-1_mipsel_mips32.ipk
Size: 24074
SHA256sum:e5b69957f4c9755ea39daf1827344e85303e79ee68806475f2b97c7e7a4be4ca
Description:  Netfilter Netlink Library Functions

Package: libnl-route200
Version: 3.5.0-1
Depends: libc, libnl-core200
Provides: libnl-route
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 140236
Filename: libnl-route200_3.5.0-1_mipsel_mips32.ipk
Size: 140085
SHA256sum:9faca10bfa6151aab600b0891c40b25721d659c1a587c88f18548bfabb1118d9
Description:  Routing Netlink Library Functions

Package: libnl-tiny
Version: 2019-10-29-0219008c-1
Depends: libc
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 14029
Filename: libnl-tiny_2019-10-29-0219008c-1_mipsel_mips32.ipk
Size: 14735
SHA256sum:46337610780070514692bfddc20c2c04d599fa06a59e2f34da5d7e89f2ef96de
Description:  This package contains a stripped down version of libnl

Package: libnl200
Version: 3.5.0-1
Depends: libc, libnl-genl200, libnl-route200, libnl-nf200
Provides: libnl
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 96
Filename: libnl200_3.5.0-1_mipsel_mips32.ipk
Size: 853
SHA256sum:38b8ec9666d74cb478e5f739ee3d86b3073c27df575adc41f5f47fa0e46cb33d
Description:  Socket handling, connection management, sending and receiving of data,
 message construction and parsing, object caching system, etc.

Package: libopcodes
Version: 2.27-1
Depends: libc, libbfd
License: GPL-3.0+
Section: libs
CPE-ID: cpe:/a:gnu:binutils
Architecture: mipsel_mips32
Installed-Size: 69574
Filename: libopcodes_2.27-1_mipsel_mips32.ipk
Size: 61246
SHA256sum:da93f3c461e0f5df001d3b524af0fbf8bcfd1a5277c62dad516c4ce271128d28
Description:  libbfd

Package: libopenssl-afalg
Version: 1.1.1g-1
Depends: libc, libopenssl1.1, kmod-crypto-user, libopenssl-conf
License: OpenSSL
Section: libs
CPE-ID: cpe:/a:openssl:openssl
Architecture: mipsel_mips32
Installed-Size: 5319
Filename: libopenssl-afalg_1.1.1g-1_mipsel_mips32.ipk
Size: 6261
SHA256sum:1ad49d99f4c85430cf8d67ff7a2836f674f039b1498a4fa04b0140e92ef36b50
Description:  This package adds an engine that enables hardware acceleration
 through the AF_ALG kernel interface.
 To use it, you need to configure the engine in /etc/ssl/openssl.cnf
 See https://www.openssl.org/docs/man1.1.1/man5/config.html#Engine-Configuration-Module
 and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
 The engine_id is "afalg"

Package: libopenssl-conf
Version: 1.1.1g-1
Depends: libc, libopenssl1.1
License: OpenSSL
Section: libs
CPE-ID: cpe:/a:openssl:openssl
Architecture: mipsel_mips32
Installed-Size: 4778
Filename: libopenssl-conf_1.1.1g-1_mipsel_mips32.ipk
Size: 5756
SHA256sum:d4e10dee3db0887a0cde6d87c8f8107887d0ae590e2e2fbba35c93c2b07e6cec
Description:  The OpenSSL Project is a collaborative effort to develop a robust,
 commercial-grade, full-featured, and Open Source toolkit implementing the
 Transport Layer Security (TLS) protocol as well as a full-strength
 general-purpose cryptography library.
 This package installs the OpenSSL configuration file /etc/ssl/openssl.cnf.

Package: libopenssl-devcrypto
Version: 1.1.1g-1
Depends: libc, libopenssl1.1, kmod-cryptodev, libopenssl-conf
License: OpenSSL
Section: libs
CPE-ID: cpe:/a:openssl:openssl
Architecture: mipsel_mips32
Installed-Size: 7747
Filename: libopenssl-devcrypto_1.1.1g-1_mipsel_mips32.ipk
Size: 8715
SHA256sum:a40f83906262c922c3bed3136b1bca702d3fef604c4401471165d1ff87c0d111
Description:  This package adds an engine that enables hardware acceleration
 through the /dev/crypto kernel interface.
 To use it, you need to configure the engine in /etc/ssl/openssl.cnf
 See https://www.openssl.org/docs/man1.1.1/man5/config.html#Engine-Configuration-Module
 and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
 The engine_id is "devcrypto"

Package: libopenssl1.1
Version: 1.1.1g-1
Depends: libc
Provides: libopenssl
License: OpenSSL
Section: libs
CPE-ID: cpe:/a:openssl:openssl
Architecture: mipsel_mips32
Installed-Size: 984641
Filename: libopenssl1.1_1.1.1g-1_mipsel_mips32.ipk
Size: 975579
SHA256sum:51102516549ef3634343d83e8d7c56167b0d149d72c24483f553e0348fd174a8
Description:  The OpenSSL Project is a collaborative effort to develop a robust,
 commercial-grade, full-featured, and Open Source toolkit implementing the
 Transport Layer Security (TLS) protocol as well as a full-strength
 general-purpose cryptography library.
 This package contains the OpenSSL shared libraries, needed by other programs.

Package: libpcap1
Version: 1.9.1-2
Depends: libc
Provides: libpcap
License: BSD-3-Clause
Section: libs
Architecture: mipsel_mips32
Installed-Size: 100905
Filename: libpcap1_1.9.1-2_mipsel_mips32.ipk
Size: 101604
SHA256sum:b6478079146607cdc5fd7c786396bf2f9029aa2d2a89c41de52b44c4ba0051ac
Description:  This package contains a system-independent library for user-level network packet
 capture.

Package: libpopt0
Version: 1.16-2
Depends: libc
Provides: libpopt
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 19242
Filename: libpopt0_1.16-2_mipsel_mips32.ipk
Size: 19895
SHA256sum:f67aff98ebcf94070427b740d8d26bf844d5ab6e6350a360609b5dae37d07d1a
Description:  A command line option parsing library

Package: libreadline8
Version: 8.0-1
Depends: libc, libncursesw6
Provides: libreadline
License: GPL-3.0
Section: libs
CPE-ID: cpe:/a:gnu:readline
Architecture: mipsel_mips32
Installed-Size: 116935
Filename: libreadline8_8.0-1_mipsel_mips32.ipk
Size: 117241
SHA256sum:f2601044560311a2fd77203c8444b2d9552788eeaefbfb11b0d3f455f0193623
Description:  The Readline library provides a set of functions for use by applications
 that allow users to edit command lines as they are typed in. Both Emacs
 and vi editing modes are available. The Readline library includes
 additional functions to maintain a list of previously-entered command
 lines, to recall and perhaps reedit those lines, and perform csh-like
 history expansion on previous commands.

Package: libroxml3.0.2
Version: 3.0.2-1
Depends: libc
Provides: libroxml
License: LGPL-2.1+
Section: libs
Architecture: mipsel_mips32
Installed-Size: 19759
Filename: libroxml3.0.2_3.0.2-1_mipsel_mips32.ipk
Size: 20523
SHA256sum:3d8f862c0633db08ff1d77f1aaf480472230fdaadaa70efc7bd38bfdf32ecfe5
Description:  Minimum, easy-to-use, C implementation for xml file parsing

Package: libsmartcols1
Version: 2.35.1-2
Depends: libc, librt
Provides: libsmartcols
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 80481
Filename: libsmartcols1_2.35.1-2_mipsel_mips32.ipk
Size: 81247
SHA256sum:570c1b635fce39935bd6a8b47b0dff6a46c2dac7a9ba2ee56995e94f2831c960
Description:  The smartcols library is used to print tables and trees in a pretty way.

Package: libsocks0
Version: 1.4.1-4
Depends: libc
Provides: libsocks
License: BSD-4-Clause
Section: libs
Architecture: mipsel_mips32
Installed-Size: 151889
Filename: libsocks0_1.4.1-4_mipsel_mips32.ipk
Size: 152724
SHA256sum:d0b8a88239bbec0eae35304d4f87c6a44f8907b33e92eef318969a1052e99868
Description:  Dante is a circuit-level firewall/proxy that can be used to provide convenient
 and secure network connectivity, requiring only that the server Dante runs on
 has external network connectivity. Dante is used daily by Fortune 100 companies
 and large international organizations, either as a standard SOCKS server or as
 a "reverse proxy".
 This package provides the shared libsocks library.

Package: libss2
Version: 1.45.6-1
Depends: libc, libcomerr0
Provides: libss
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 7941
Filename: libss2_1.45.6-1_mipsel_mips32.ipk
Size: 8721
SHA256sum:ee7433023c245bd91ba9db583f5e84ae8e8c1010c94d5b9ec8de57ba197453ee
Description:  This pacakge contains libss, a command-line interface parsing library
 bundled with e2fsprogs.

Package: libsysfs2
Version: 2.1.0-3
Depends: libc
Provides: libsysfs
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 11085
Filename: libsysfs2_2.1.0-3_mipsel_mips32.ipk
Size: 11897
SHA256sum:0b1cb2e1e3ab9e6269054c6fd8296745770c45fc7e640a378be7a7f348411123
Description:  The library's purpose is to provide a consistant and stable interface for
 querying system device information exposed through sysfs.

Package: libubox-lua
Version: 2020-07-11-f4e9bf73-1
Depends: libc, libubox20191228, liblua5.1.5
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 3810
Filename: libubox-lua_2020-07-11-f4e9bf73-1_mipsel_mips32.ipk
Size: 4557
SHA256sum:a07e62e1db60b2f4165d1770d5bfa439a65d13528b036cab8aa4399e2b309221
Description:  Lua binding for the OpenWrt Basic utility library

Package: libubox20191228
Version: 2020-07-11-f4e9bf73-1
Depends: libc
Provides: libubox
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 21635
Filename: libubox20191228_2020-07-11-f4e9bf73-1_mipsel_mips32.ipk
Size: 22337
SHA256sum:6a2ebf790967e2c01af24463e11fc4b50be8fc7e599f13a3ce27b9ad4c90180f
Description:  Basic utility library

Package: libubus-lua
Version: 2020-02-05-171469e3-1
Depends: libc, libubus20191227, liblua5.1.5
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 6890
Filename: libubus-lua_2020-02-05-171469e3-1_mipsel_mips32.ipk
Size: 7678
SHA256sum:f4dda87e9a3769ddfe5bdef191670a6ae72d3dc8eaf86e62fa939dc4e7f691b1
Description:  Lua binding for the OpenWrt RPC client

Package: libubus20191227
Version: 2020-02-05-171469e3-1
Depends: libc, libubox20191228
Provides: libubus
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 10843
Filename: libubus20191227_2020-02-05-171469e3-1_mipsel_mips32.ipk
Size: 11574
SHA256sum:0b04b19e8abe7fa0564204ee20edc3f5ecb162bcdffa6a040fd249668cd144ff
Description:  OpenWrt RPC client library

Package: libuci-lua
Version: 2020-04-24-ec8d3233-3
Depends: libc, libuci20130104, liblua5.1.5
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 6536
Filename: libuci-lua_2020-04-24-ec8d3233-3_mipsel_mips32.ipk
Size: 7324
SHA256sum:2305470cbf74f32bce05564903bc7f030c984d9713e7fc11846129452cb5f544
Description:  Lua plugin for UCI

Package: libuci20130104
Version: 2020-04-24-ec8d3233-3
Depends: libc, libubox20191228
Provides: libuci
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 17373
Filename: libuci20130104_2020-04-24-ec8d3233-3_mipsel_mips32.ipk
Size: 18201
SHA256sum:d8ca2a82ddbffa4a2a2b7cf060461c0d13c87d32563affe1f00f6baae41daedb
Description:  C library for the Unified Configuration Interface (UCI)

Package: libuclient20160123
Version: 2020-06-17-c6609861-1
Depends: libc, libubox20191228
Provides: libuclient
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 10264
Filename: libuclient20160123_2020-06-17-c6609861-1_mipsel_mips32.ipk
Size: 11001
SHA256sum:5a06b40204e79c2af213eae9a77f0a9712ac6198c0cc1b474005eb1b018c085f
Description:  HTTP/1.1 client library

Package: libunwind8
Version: 1.3.1-1
Depends: libc
Provides: libunwind
License: X11
Section: libs
CPE-ID: cpe:/a:libunwind_project:libunwind
Architecture: mipsel_mips32
Installed-Size: 53667
Filename: libunwind8_1.3.1-1_mipsel_mips32.ipk
Size: 54456
SHA256sum:3288daf60ad021fa54736ae5c99beecb81ed289e76ee26c1ed5dfb692edf269a
Description:  Libunwind defines a portable and efficient C programming interface (API) to determine the call-chain of a program.

Package: libusb-1.0-0
Version: 1.0.22-2
Depends: libc, libpthread, librt
Provides: libusb-1.0
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 27924
Filename: libusb-1.0-0_1.0.22-2_mipsel_mips32.ipk
Size: 28679
SHA256sum:4b321128a5375b64e1538da803e6da7bba07deb533b13c4c0466ec94b5fde4a9
Description:  libusb is a C library that gives applications easy access to USB devices on
 many different operating systems.

Package: libusb-compat4
Version: 0.1.5-2
Depends: libc, libusb-1.0-0
Provides: libusb-compat
License: LGPL-2.1
Section: libs
Architecture: mipsel_mips32
Installed-Size: 5839
Filename: libusb-compat4_0.1.5-2_mipsel_mips32.ipk
Size: 6631
SHA256sum:dc39a8e026811cfd7bfcd361ee91864ca9fc43903c62278234901208b924cb14
Description:  libusb is a C library that gives applications easy access to USB devices on
 many different operating systems.

Package: libustream-mbedtls20200215
Version: 2020-03-13-5e1bc342-1
Depends: libc, libubox20191228, libmbedtls12
Provides: libustream-mbedtls
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 4251
Filename: libustream-mbedtls20200215_2020-03-13-5e1bc342-1_mipsel_mips32.ipk
Size: 5001
SHA256sum:b8013de2bacc409deabe12bae0acd2f73baf3f2aae44ad7ebeb90892eaabb5be
Description:  ustream SSL Library (mbedtls)

Package: libustream-openssl20200215
Version: 2020-03-13-5e1bc342-1
Depends: libc, libubox20191228, libopenssl1.1
Provides: libustream-openssl
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 4333
Filename: libustream-openssl20200215_2020-03-13-5e1bc342-1_mipsel_mips32.ipk
Size: 5061
SHA256sum:912f1a70b5f102b31e7515300167b8980b1e9ca6c12926ad19f43e8cbf74fde1
Description:  ustream SSL Library (openssl)

Package: libustream-wolfssl20200215
Version: 2020-03-13-5e1bc342-1
Depends: libc, libubox20191228, libwolfssl24
Provides: libustream-wolfssl
License: ISC
Section: libs
Architecture: mipsel_mips32
Installed-Size: 3797
Filename: libustream-wolfssl20200215_2020-03-13-5e1bc342-1_mipsel_mips32.ipk
Size: 4529
SHA256sum:76dd805192e4cc8a84ca8c2d4d84068acb4eb4b30f9f4f2cb3aaa706023f92f5
Description:  ustream SSL Library (wolfssl)

Package: libuuid1
Version: 2.35.1-2
Depends: libc, librt
Provides: libuuid
License: GPL-2.0
Section: libs
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 12838
Filename: libuuid1_2.35.1-2_mipsel_mips32.ipk
Size: 13751
SHA256sum:f40fb3f67d2f83915aa6cf3b8bff99327676d5fe398219c1c1bfe24ab3411655
Description:  The UUID library is used to generate unique identifiers for objects
 that may be accessible beyond the local system. This library
 generates UUIDs compatible with those created by the Open Software
 Foundation (OSF) Distributed Computing Environment (DCE) utility.

Package: libwolfssl24
Version: 4.4.0-stable-2
Depends: libc
Provides: libcyassl, libwolfssl, libcyassl24
License: GPL-2.0-or-later
Section: libs
CPE-ID: cpe:/a:wolfssl:wolfssl
Architecture: mipsel_mips32
Installed-Size: 388641
Filename: libwolfssl24_4.4.0-stable-2_mipsel_mips32.ipk
Size: 387543
SHA256sum:cd08b49f2288c7c2bbedb07a70d1fbbc4b66e603314a43c7976d6903c29ada6e
Description:  wolfSSL (formerly CyaSSL) is an SSL library optimized for small
 footprint, both on disk and for memory use.

Package: linux-atm
Version: 2.5.2-7
Depends: libc
License: GPL-2.0+
Section: libs
CPE-ID: cpe:/a:linux-atm:linux-atm
Architecture: mipsel_mips32
Installed-Size: 17064
Filename: linux-atm_2.5.2-7_mipsel_mips32.ipk
Size: 17763
SHA256sum:ced3040bdd6c3756903530c8affa002166aca1a9423530fd97c51980e99be025
Description:  This package contains a library for accessing the Linux ATM subsystem.

Package: logd
Version: 2019-12-31-0e34af14-4
Depends: libc, libubox20191228, libubus20191227, libblobmsg-json
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 10364
Filename: logd_2019-12-31-0e34af14-4_mipsel_mips32.ipk
Size: 11098
SHA256sum:0254eae919483e62d7f2f28db9c8808d1f979c55eb2e820ebe76125ae13d9621
Description:  OpenWrt system log implementation

Package: logger
Version: 2.35.1-2
Depends: libc, librt
Alternatives: 200:/usr/bin/logger:/usr/bin/util-linux-logger
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 15869
Filename: logger_2.35.1-2_mipsel_mips32.ipk
Size: 16708
SHA256sum:aad2654512b64f2aa3dd6e50cb09d7f45e1de6c7ed7007bac4c99695c524bc8e
Description:  logger makes entries in the system log, it provides a shell command interface
 to the syslog system log module

Package: look
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 3791
Filename: look_2.35.1-2_mipsel_mips32.ipk
Size: 4559
SHA256sum:f88cd573f543c92bd49774b6b46126692ac38d13cc4bfe079fe3fe389e98b405
Description:  look utility displays any lines in file which contain string

Package: losetup
Version: 2.35.1-2
Depends: libc, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 39823
Filename: losetup_2.35.1-2_mipsel_mips32.ipk
Size: 40658
SHA256sum:a2c27a291fd6f5821b521dedfbff8d86e47556e69bf5c0baa3afb984e8b30456
Description:  losetup is used to associate loop devices with regular files or block devices,
 to detach loop devices and to query the status of a loop device

Package: lsattr
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 2604
Filename: lsattr_1.45.6-1_mipsel_mips32.ipk
Size: 3300
SHA256sum:93fe4687b696dd89fdc7d30f5fccc21d6e46d1464df3ded9b63395aa0836595d
Description:  Ext2 Filesystem lsattr utility

Package: lsblk
Version: 2.35.1-2
Depends: libc, libblkid1, libmount1, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 49233
Filename: lsblk_2.35.1-2_mipsel_mips32.ipk
Size: 50050
SHA256sum:caed2a79a81871e07fcb0c11058e83511d0d48c7cf0ab7bbe0e0c1c1fcc29004
Description:  lsblk lists information about all or the specified block devices

Package: lscpu
Version: 2.35.1-2
Depends: libc, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 32965
Filename: lscpu_2.35.1-2_mipsel_mips32.ipk
Size: 33779
SHA256sum:ff46a1bed782876ff96c19fe5feb4a3c40e79b104a61f644c4a513e28a0a1ba8
Description:  lscpu displays information about the CPU architecture

Package: lua-examples
Version: 5.1.5-7
Depends: libc, lua
License: MIT
Section: lang
Architecture: mipsel_mips32
Installed-Size: 5291
Filename: lua-examples_5.1.5-7_mipsel_mips32.ipk
Size: 6146
SHA256sum:9e704f4040dd77da65a497ff1ab3124480cdd2914f9d55cb30869a458e868b5c
Description:  Lua is a powerful light-weight programming language designed for extending 
 applications. Lua is also frequently used as a general-purpose, stand-alone 
 language. Lua is free software.
 This package contains Lua language examples.

Package: lua5.3
Version: 5.3.5-4
Depends: libc, liblua5.3-5.3
License: MIT
Section: lang
Architecture: mipsel_mips32
Installed-Size: 5241
Filename: lua5.3_5.3.5-4_mipsel_mips32.ipk
Size: 6073
SHA256sum:ce96628851c34f82e7113a3c371fa506235158c0f9d38e1c7cc89e30f437895d
Description:  Lua is a powerful, efficient, lightweight, embeddable scripting language. It
 supports procedural programming, object-oriented programming, functional
 programming, data-driven programming, and data description.
 This package contains the Lua language interpreter.

Package: lua
Version: 5.1.5-7
Depends: libc, liblua5.1.5
License: MIT
Section: lang
Architecture: mipsel_mips32
Installed-Size: 4831
Filename: lua_5.1.5-7_mipsel_mips32.ipk
Size: 5655
SHA256sum:9db7e1e6cd7de4cf927606b1c5f19bc90c2f3fd99cb61b50faafbe8bb7c9f223
Description:  Lua is a powerful light-weight programming language designed for extending 
 applications. Lua is also frequently used as a general-purpose, stand-alone 
 language. Lua is free software.
 This package contains the Lua language interpreter.

Package: luac5.3
Version: 5.3.5-4
Depends: libc, liblua5.3-5.3
License: MIT
Section: lang
Architecture: mipsel_mips32
Installed-Size: 5617
Filename: luac5.3_5.3.5-4_mipsel_mips32.ipk
Size: 6467
SHA256sum:2dc45bea35c022679a9ccee5b31b2cc945496bfa496200b166e3370a6fd56ea9
Description:  Lua is a powerful, efficient, lightweight, embeddable scripting language. It
 supports procedural programming, object-oriented programming, functional
 programming, data-driven programming, and data description.
 This package contains the Lua language compiler.

Package: luac
Version: 5.1.5-7
Depends: libc, liblua5.1.5
License: MIT
Section: lang
Architecture: mipsel_mips32
Installed-Size: 5624
Filename: luac_5.1.5-7_mipsel_mips32.ipk
Size: 6464
SHA256sum:2f3090c73c58b41c90d5293017911d8aebfba8701c0fe08b3f30a972ba2da73f
Description:  Lua is a powerful light-weight programming language designed for extending 
 applications. Lua is also frequently used as a general-purpose, stand-alone 
 language. Lua is free software.
 This package contains the Lua language compiler.

Package: maccalc
Version: 1
Depends: libc
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 2217
Filename: maccalc_1_mipsel_mips32.ipk
Size: 2927
SHA256sum:be1d03595f84b7a5acf6f27e7ae9204aea0136b0c7d254b7a34277df8b00ecae
Description:  This package contains a MAC address manipulation utility.

Package: map
Version: 5
Depends: libc, kmod-ip6-tunnel, libubox20191228, libubus20191227, iptables-mod-conntrack-extra, kmod-nat46
Provides: map-t
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 7238
Filename: map_5_mipsel_mips32.ipk
Size: 8157
SHA256sum:7f5c4ec11b4e52eb05e0f69c80f95698fb98d62e9d1133be48e77c4481304702
Description:  Provides support for MAP-E (RFC7597), MAP-T (RFC7599) and
 Lightweight 4over6 (RFC7596) in /etc/config/network.
 MAP combines address and port translation with the tunneling
 of IPv4 packets over an IPv6 network

Package: mbedtls-util
Version: 2.16.6-1
Depends: libc, libmbedtls12
License: GPL-2.0-or-later
Section: utils
CPE-ID: cpe:/a:arm:mbed_tls
Architecture: mipsel_mips32
Installed-Size: 6914
Filename: mbedtls-util_2.16.6-1_mipsel_mips32.ipk
Size: 7820
SHA256sum:b58dc190538a712b2a404dfa8222f3b8fa137a3f0f4842d7eb79ce99a489f41e
Description:  The aim of the mbedtls project is to provide a quality, open-source
 cryptographic library written in C and targeted at embedded systems.
 This package contains mbedtls helper programs for private key and
 CSR generation (gen_key, cert_req)

Package: mcookie
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 12036
Filename: mcookie_2.35.1-2_mipsel_mips32.ipk
Size: 12873
SHA256sum:9028762c94dbd4a009c0a8b82487557eb4508829ad1bd2fe63eaa8a37e5c06b8
Description:  mcookie generates a 128-bit random hexadecimal number for use with the X
 authority system

Package: mdadm
Version: 4.1-2
Depends: libc, libpthread, kmod-md-mod, kmod-md-raid0, kmod-md-raid10, kmod-md-raid1
Section: utils
CPE-ID: cpe:/a:mdadm_project:mdadm
Architecture: mipsel_mips32
Installed-Size: 216063
Filename: mdadm_4.1-2_mipsel_mips32.ipk
Size: 216761
SHA256sum:188a91c7a600d0c5f0cd3f43e8316d524ac17256ae07d96febca55b161ef1d4e
Description:  A tool for managing Linux Software RAID arrays.
 RAID 0, 1 and 10 support included.
 If you need RAID 4,5 or 6 functionality please
 install kmod-md-raid456 .

Package: mkf2fs
Version: 1.13.0-1
Depends: libc, libf2fs6
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 15653
Filename: mkf2fs_1.13.0-1_mipsel_mips32.ipk
Size: 16380
SHA256sum:5d9ba847f5e4c2393c312fc215f7ff5cd603301f22db3b81b8c5d4938b3f2d30
Description:  Utility for creating a Flash-Friendly File System (F2FS)

Package: more
Version: 2.35.1-2
Depends: libc, libncurses6
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 14528
Filename: more_2.35.1-2_mipsel_mips32.ipk
Size: 15300
SHA256sum:e8b35d6d3b86d4c7e024a4de137ca565f2605c4b058097c3efffc36052ed600d
Description:  more is a filter for paging through text one screenful at a time

Package: mount-utils
Version: 2.35.1-2
Depends: libc, librt, libmount1, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 49291
Filename: mount-utils_2.35.1-2_mipsel_mips32.ipk
Size: 50074
SHA256sum:1426c9e35c0e2e9033521b6f9165645dcdb49316e3f7e074e61c4cc2bbeac562
Description:  contains: mount, umount, findmnt

Package: mt7601u-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 26415
Filename: mt7601u-firmware_20200619-1_mipsel_mips32.ipk
Size: 27117
SHA256sum:59eb9dbeffd3382aae978dfd015490a98e416b1cbc3fd7549f16e26cf44f86e5
Description:  MediaTek MT7601U firmware

Package: mt7622bt-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 53873
Filename: mt7622bt-firmware_20200619-1_mipsel_mips32.ipk
Size: 54698
SHA256sum:3799ab1c47ff54120b0a063318755d0f7417c655a6cf348ef0ed279c81254455
Description:  mt7622bt firmware

Package: mwifiex-pcie-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 514905
Filename: mwifiex-pcie-firmware_20200619-1_mipsel_mips32.ipk
Size: 515527
SHA256sum:fbefb3ec0c68518308f99c075a922cfc016a6cecffdbcbdff7f9d551edd0427c
Description:  Marvell 8897 firmware

Package: mwifiex-sdio-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 438433
Filename: mwifiex-sdio-firmware_20200619-1_mipsel_mips32.ipk
Size: 438663
SHA256sum:ee1417d9e2880f6703b6e8cc5922f9a6dc0e65dbffb9105f1beb34279b68140c
Description:  Marvell 8887 firmware

Package: mwl8k-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 192352
Filename: mwl8k-firmware_20200619-1_mipsel_mips32.ipk
Size: 193187
SHA256sum:6e25926b3e80bd35edc9f0a555a1e08deb4f67086a3482ffa388d10b69e31d7d
Description:  Marvell 8366/8687 firmware

Package: namei
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 10481
Filename: namei_2.35.1-2_mipsel_mips32.ipk
Size: 11295
SHA256sum:be7dfc055e5f44248f1bb4fe40e8c6f81a5fb9c49425353fbd9ac4fbb491b3d5
Description:  namei uses its arguments as pathnames to any type of Unix file (symlinks,
 files, directories, and so forth)

Package: netifd
Version: 2020-06-06-51e9fb81-1
Depends: libc, libuci20130104, libnl-tiny, libubus20191227, ubus, ubusd, jshn, libubox20191228
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 73077
Filename: netifd_2020-06-06-51e9fb81-1_mipsel_mips32.ipk
Size: 73244
SHA256sum:66a96c5cc5dbb307f3d2d5f25dcfa001844d280c54437cebf02a9153dd0ba8eb
Description:  OpenWrt Network Interface Configuration Daemon

Package: nftables-json
Version: 0.9.3-1
Depends: libc, kmod-nft-core, libnftnl12, jansson
Provides: nftables
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 240745
Filename: nftables-json_0.9.3-1_mipsel_mips32.ipk
Size: 239663
SHA256sum:e621082f91ceec5c93fd9d8f2b6989d6010036aa5b19373a2d2663d87b13863f
Description:  nftables userspace utility with JSON support

Package: nftables-nojson
Version: 0.9.3-1
Depends: libc, kmod-nft-core, libnftnl12
Provides: nftables
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 208582
Filename: nftables-nojson_0.9.3-1_mipsel_mips32.ipk
Size: 208099
SHA256sum:cb422c5b4343eb2ea849ade6296df135e8e84ba449bec8a1d2ee90eab7097917
Description:  nftables userspace utility no JSON support

Package: nsenter
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 10375
Filename: nsenter_2.35.1-2_mipsel_mips32.ipk
Size: 11173
SHA256sum:ea0d7f156ac75863e463368150eb87a59f5726e46072730a48fc331e67906be9
Description:  run program with namespaces of other processes

Package: nstat
Version: 5.7.0-2
Depends: libc, libnl-tiny, libmnl0, libelf1
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 7580
Filename: nstat_5.7.0-2_mipsel_mips32.ipk
Size: 8361
SHA256sum:9ff82d083cdcb848650ab806de0ffd6904e2582830610f5b2e1bab19b9d5634d
Description:  Network statistics utility

Package: objdump
Version: 2.27-1
Depends: libc, libopcodes
License: GPL-3.0+
Section: devel
CPE-ID: cpe:/a:gnu:binutils
Architecture: mipsel_mips32
Installed-Size: 147576
Filename: objdump_2.27-1_mipsel_mips32.ipk
Size: 148121
SHA256sum:27b27c361013dbad2086ccc1da7f03950e6b51c434e62085a01a097257b06f55
Description:  objdump

Package: odhcp6c
Version: 2020-03-28-f575351c-16
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 26281
Filename: odhcp6c_2020-03-28-f575351c-16_mipsel_mips32.ipk
Size: 26987
SHA256sum:9c624a25c6f1d70ac06c58c6280c830cb24f2a4f455ea1427063b0059839031f
Description:  Embedded DHCPv6-client for OpenWrt

Package: odhcpd-ipv6only
Version: 2020-06-21-5da52992-4
Depends: libc, libubox20191228, libuci20130104, libubus20191227, libnl-tiny
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 40202
Filename: odhcpd-ipv6only_2020-06-21-5da52992-4_mipsel_mips32.ipk
Size: 41187
SHA256sum:e3a555252502577cca49e94dd94e79735ebdcc0d7594c26991ccc1621a23950a
Description:  odhcpd is a daemon for serving and relaying IP management protocols to
 configure clients and downstream routers. It tries to follow the RFC 6204
 requirements for IPv6 home routers.
 
 This is a variant providing server services for RA, stateless and stateful
 DHCPv6,  prefix delegation and can be used to relay RA, DHCPv6 and NDP between
 routed (non-bridged) interfaces in case no delegated prefixes are available.

Package: odhcpd
Version: 2020-06-21-5da52992-4
Depends: libc, libubox20191228, libuci20130104, libubus20191227, libnl-tiny
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 46008
Filename: odhcpd_2020-06-21-5da52992-4_mipsel_mips32.ipk
Size: 46897
SHA256sum:5ab0f8e9e29a2c1d51b66421669d8deded427ccd774214cb7ee49a71a0e73e8f
Description:  odhcpd is a daemon for serving and relaying IP management protocols to
 configure clients and downstream routers. It tries to follow the RFC 6204
 requirements for IPv6 home routers.
 
 This is a variant providing server services for DHCPv4, RA, stateless and
 stateful DHCPv6,  prefix delegation and can be used to relay RA, DHCPv6 and
 NDP between routed (non-bridged) interfaces in case no delegated prefixes
 are available.

Package: om-watchdog
Version: 2
Depends: libc
Section: base
Architecture: mipsel_mips32
Installed-Size: 780
Filename: om-watchdog_2_mipsel_mips32.ipk
Size: 1479
SHA256sum:4c72822442af8c3c5d63fc71f7ff4f2553839aafe4ad22be0fb74974b68054a0
Description:  This package contains the hw watchdog script for the OM1P and OM2P device.

Package: omcproxy
Version: 2018-12-14-722151f0-9
Depends: libc, libubox20191228, libubus20191227
License: Apache-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 18669
Filename: omcproxy_2018-12-14-722151f0-9_mipsel_mips32.ipk
Size: 19458
SHA256sum:dbf7f1cf52242f273c1b87273d6ed3942c91ff7d2e37b417073bb0710eb4e86e
Description:  IGMPv3 and MLDv2 Multicast Proxy

Package: openssl-util
Version: 1.1.1g-1
Depends: libc, libopenssl1.1, libopenssl-conf
License: OpenSSL
Section: utils
CPE-ID: cpe:/a:openssl:openssl
Architecture: mipsel_mips32
Installed-Size: 239548
Filename: openssl-util_1.1.1g-1_mipsel_mips32.ipk
Size: 238547
SHA256sum:93ba27d067d65955bb46e6f64072f26ccd39a0704181590f45a48223f5fdfce6
Description:  The OpenSSL Project is a collaborative effort to develop a robust,
 commercial-grade, full-featured, and Open Source toolkit implementing the
 Transport Layer Security (TLS) protocol as well as a full-strength
 general-purpose cryptography library.
 This package contains the OpenSSL command-line utility.

Package: openvpn-easy-rsa
Version: 3.0.4-1
Depends: libc, openssl-util
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 17286
Filename: openvpn-easy-rsa_3.0.4-1_mipsel_mips32.ipk
Size: 18078
SHA256sum:e4db7ee445c108ca819c2b85bcf924b0a24f975cae13cf5e1328fa445bb2674e
Description:  CLI utility to build and manage a PKI CA.

Package: openvpn-mbedtls
Version: 2.4.9-2
Depends: libc, kmod-tun, liblzo2, libmbedtls12
Provides: openvpn, openvpn-crypto
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:openvpn:openvpn
Architecture: mipsel_mips32
Installed-Size: 178114
Filename: openvpn-mbedtls_2.4.9-2_mipsel_mips32.ipk
Size: 178560
SHA256sum:f8eb9be452f541ed2b830870c9b9c65d7f5167ba9407124fbcf8f6f9ca271c9f
Description:  Open source VPN solution using mbedTLS

Package: openvpn-nossl
Version: 2.4.9-2
Depends: libc, kmod-tun, liblzo2
Provides: openvpn
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:openvpn:openvpn
Architecture: mipsel_mips32
Installed-Size: 88766
Filename: openvpn-nossl_2.4.9-2_mipsel_mips32.ipk
Size: 89553
SHA256sum:d407d0f6d02d36670c67e2bb6cd643a5ed2df5cac1c10e8fd247d856957e0ef7
Description:  Open source VPN solution using plaintext (no SSL)

Package: openvpn-openssl
Version: 2.4.9-2
Depends: libc, kmod-tun, liblzo2, libopenssl1.1
Provides: openvpn, openvpn-crypto
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:openvpn:openvpn
Architecture: mipsel_mips32
Installed-Size: 183368
Filename: openvpn-openssl_2.4.9-2_mipsel_mips32.ipk
Size: 183118
SHA256sum:0386572609883183ef07a2829efdfb434da7ba598696f84131df7cc90ded2eb3
Description:  Open source VPN solution using OpenSSL

Package: openwrt-keyring
Version: 2019-07-25-8080ef34-1
Depends: libc
Provides: lede-keyring
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 1314
Filename: openwrt-keyring_2019-07-25-8080ef34-1_mipsel_mips32.ipk
Size: 2087
SHA256sum:3d349894a3876f3597b41c90f28747aba9822130bedfdb036368de8a5923fb97
Description:  The keyring of with the developer using and gpg public keys.

Package: opkg
Version: 2020-05-07-f2166a89-1
Depends: libc, uclient-fetch, libpthread, libubox20191228
License: GPL-2.0
Section: base
Essential: yes
Architecture: mipsel_mips32
Installed-Size: 68814
Filename: opkg_2020-05-07-f2166a89-1_mipsel_mips32.ipk
Size: 69734
SHA256sum:e7426a567f53e6e8ba89d42726db436ebdc4a1629b887ec4699b0a78b59f7c71
Description:  Lightweight package management system
 opkg is the opkg Package Management System, for handling
 installation and removal of packages on a system. It can
 recursively follow dependencies and download all packages
 necessary to install a particular package.
 
 opkg knows how to install both .ipk and .deb packages.

Package: owipcalc
Version: 3
Depends: libc
License: Apache-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 5467
Filename: owipcalc_3_mipsel_mips32.ipk
Size: 6312
SHA256sum:33bed78bfe8c3427bf5b4e365e7700024880611349e80ba9c789fcc4e8eab85d
Description:  The owipcalc utility supports a number of calculations and tests to work
 with ip-address ranges, this is useful for scripts that e.g. need to
 partition ipv6-prefixes into small subnets or to calculate address ranges
 for dhcp pools.

Package: p54-pci-firmware
Version: 1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 23504
Filename: p54-pci-firmware_1_mipsel_mips32.ipk
Size: 24146
SHA256sum:267ea49afe32e9ffa5169cc2f5e6e96658b9f461fcd130200e5b3cb0bfbf64d7
Description:  p54-pci firmware

Package: p54-spi-firmware
Version: 1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 26767
Filename: p54-spi-firmware_1_mipsel_mips32.ipk
Size: 27398
SHA256sum:fa08dca68e4b7ccce2fb9fce8c055bdff213fc64c2519388248dc231aa2c8500
Description:  p54-spi firmware

Package: p54-usb-firmware
Version: 1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 23796
Filename: p54-usb-firmware_1_mipsel_mips32.ipk
Size: 24444
SHA256sum:fefc16255f093164b88887449afa5d915688ebeacf5cb794b8ab01b3dacbdf1e
Description:  p54-usb firmware

Package: partx-utils
Version: 2.35.1-2
Depends: libc, libblkid1, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 49113
Filename: partx-utils_2.35.1-2_mipsel_mips32.ipk
Size: 49881
SHA256sum:08e1bcd072557e2b034ecb4311a3159575c86139f1be4cf911860c9f6754b429
Description:  contains partx, addpart, delpart

Package: ppp-mod-passwordfd
Version: 2.4.8.git-2020-05-25-2
Depends: libc
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 1465
Filename: ppp-mod-passwordfd_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 2290
SHA256sum:3c86806a272c2c03e93bc9b370b2f8418678b027a63ed1f4ea2d62c86b0c1685
Description:  This package allows to pass the PAP/CHAP secret from a filedescriptor.
 Eliminates the need for a secrets file.

Package: ppp-mod-pppoa
Version: 2.4.8.git-2020-05-25-2
Depends: libc, linux-atm, kmod-pppoa
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 7173
Filename: ppp-mod-pppoa_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 8000
SHA256sum:e9a35304a607cdf9ee248f94c2a3f5b37e4987862b59e729a8b9a61a058d5fb1
Description:  This package contains a PPPoA (PPP over ATM) plugin for ppp.

Package: ppp-mod-pppoe
Version: 2.4.8.git-2020-05-25-2
Depends: libc, kmod-pppoe
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 10108
Filename: ppp-mod-pppoe_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 10895
SHA256sum:597abc072e8150fc0110d57f98d22dee87402798c915d68f7a19201f6fc26de1
Description:  This package contains a PPPoE (PPP over Ethernet) plugin for ppp.

Package: ppp-mod-pppol2tp
Version: 2.4.8.git-2020-05-25-2
Depends: libc, kmod-pppol2tp
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 4457
Filename: ppp-mod-pppol2tp_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 5240
SHA256sum:52aa5b64a30373142696bcbdc0495e4b398d2879987993724a3c8960601bd8de
Description:  This package contains a PPPoL2TP (PPP over L2TP) plugin for ppp.

Package: ppp-mod-pptp
Version: 2.4.8.git-2020-05-25-2
Depends: libc, kmod-pptp, kmod-mppe, resolveip
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 16118
Filename: ppp-mod-pptp_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 16850
SHA256sum:4d898d4bf363990449f306b375f1f27b7c08a9ebb04e4e1749d2b82b7acce51b
Description:  This package contains a PPtP plugin for ppp.

Package: ppp-mod-radius
Version: 2.4.8.git-2020-05-25-2
Depends: libc
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 22185
Filename: ppp-mod-radius_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 23048
SHA256sum:0039dd30b19932bd99707e73eff5a27a3efefd354d878151dd4fe98acf6491e7
Description:  This package contains a RADIUS (Remote Authentication Dial-In User Service)
 plugin for ppp.

Package: ppp-multilink
Version: 2.4.8.git-2020-05-25-2
Depends: libc, kmod-ppp
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 140897
Filename: ppp-multilink_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 141460
SHA256sum:7a4cd81b987becbb52ca45a10f29cc1e3e39068d18bee77203b96e8350e4cb6a
Description:  PPP daemon (with multilink support)

Package: ppp
Version: 2.4.8.git-2020-05-25-2
Depends: libc, kmod-ppp
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 126364
Filename: ppp_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 126829
SHA256sum:356793b425c845f967367933dd6c8550cd5626c5ad825eb6470903ae2c2db5a3
Description:  This package contains the PPP (Point-to-Point Protocol) daemon.

Package: pppdump
Version: 2.4.8.git-2020-05-25-2
Depends: libc
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 14350
Filename: pppdump_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 15045
SHA256sum:e480d15fdab2f0ec7597681cdcdc791c252136bf3afc26dd41ad6ebfc08b0297
Description:  This package contains an utility to read PPP record file.

Package: pppoe-discovery
Version: 2.4.8.git-2020-05-25-2
Depends: libc, ppp-mod-pppoe
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 6683
Filename: pppoe-discovery_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 7556
SHA256sum:38cda0b0478d4e805f69cfa17312ba646c1061da259489814656173fb1b36e83
Description:  This tool performs the same discovery process as pppoe, but does
 not initiate a session. Can be useful to debug pppoe.

Package: pppstats
Version: 2.4.8.git-2020-05-25-2
Depends: libc
License: BSD-4-Clause
Section: net
CPE-ID: cpe:/a:samba:ppp
Architecture: mipsel_mips32
Installed-Size: 4935
Filename: pppstats_2.4.8.git-2020-05-25-2_mipsel_mips32.ipk
Size: 5683
SHA256sum:0a726e836cd316152fe33a40511af3883a2467940ccb7050d02557e77fecc627
Description:  This package contains an utility to report PPP statistics.

Package: prism54-firmware
Version: 1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 80219
Filename: prism54-firmware_1_mipsel_mips32.ipk
Size: 80999
SHA256sum:5da1772d326ee321a5ebe93e62233717432fa0af24137c63432cc592ff2d844c
Description:  prism54 firmware

Package: prlimit
Version: 2.35.1-2
Depends: libc, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 11314
Filename: prlimit_2.35.1-2_mipsel_mips32.ipk
Size: 12176
SHA256sum:277cdc5663c68cf5b92de4d872810ebdecd3975d2e062076ef36dcfc59fd1f20
Description:  Given a process id and one or more resources, prlimit tries to retrieve
 and/or modify the limits.

Package: procd-seccomp
Version: 2020-07-17-268126a3-1
Depends: libc, libubox20191228, libblobmsg-json
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 15428
Filename: procd-seccomp_2020-07-17-268126a3-1_mipsel_mips32.ipk
Size: 15468
SHA256sum:88daa2185ac3fb090f3fe9d0fcad8de82d89034d0f45d37c99a0994b638cea5f
Description:  OpenWrt process seccomp helper + utrace

Package: procd-ujail-console
Version: 2020-07-17-268126a3-1
Depends: libc, procd-ujail, libubus20191227, libubox20191228
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 3013
Filename: procd-ujail-console_2020-07-17-268126a3-1_mipsel_mips32.ipk
Size: 3744
SHA256sum:fd33e653259c9a5161021879d2155e5f387517104e6a8ed78ed88c3e1cb772eb
Description:  OpenWrt process jail console

Package: procd-ujail
Version: 2020-07-17-268126a3-1
Depends: libc, libubox20191228, libubus20191227, libblobmsg-json
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 24876
Filename: procd-ujail_2020-07-17-268126a3-1_mipsel_mips32.ipk
Size: 25143
SHA256sum:59cf0c408c8a411f216dae9262542484704fd49fbac62e2e6497093db0587ccb
Description:  OpenWrt process jail helper

Package: procd
Version: 2020-07-17-268126a3-1
Depends: libc, ubusd, ubus, libjson-script, ubox, libubox20191228, libubus20191227, libblobmsg-json, libjson-c5
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 50173
Filename: procd_2020-07-17-268126a3-1_mipsel_mips32.ipk
Size: 50904
SHA256sum:ffe24b3131121d5b5391148391d6aa8b3ca50904564ceea9e138e468e8e3799b
Description:  OpenWrt system process manager

Package: px5g-mbedtls
Version: 9
Depends: libc, libmbedtls12
Provides: px5g
License: LGPL-2.1
Section: utils
Architecture: mipsel_mips32
Installed-Size: 4456
Filename: px5g-mbedtls_9_mipsel_mips32.ipk
Size: 5261
SHA256sum:2be8183275fa8a15bc4950eb24a6a67472a899c631da68733fe0b4f3e7ee0c46
Description:  Px5g is a tiny standalone X.509 certificate generator.
 It suitable to create key files and certificates in DER
 and PEM format for use with stunnel, uhttpd and others.

Package: px5g-standalone
Version: 9
Depends: libc
License: LGPL-2.1
Section: utils
Architecture: mipsel_mips32
Installed-Size: 57812
Filename: px5g-standalone_9_mipsel_mips32.ipk
Size: 58621
SHA256sum:bf507edf3994becb9fc327d2cb46fb4dc53460f6a968b2d63b73cc21ac2c9c6b
Description:  Px5g is a tiny standalone X.509 certificate generator.
 It suitable to create key files and certificates in DER
 and PEM format for use with stunnel, uhttpd and others.

Package: qos-scripts
Version: 1.3.1-2
Depends: libc, tc, kmod-sched-core, kmod-sched-connmark, kmod-ifb, iptables, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0
Section: utils
Architecture: all
Installed-Size: 6362
Filename: qos-scripts_1.3.1-2_all.ipk
Size: 7260
SHA256sum:9964034909e52cf729bcc3bb636bf0e7ff199a26266b10f36b2fc2b982bab3dd
Description:  A set of scripts that abstract QoS configuration into a simple 
 configuration file supporting stanzas that specify any number of QoS 
 entries.

Package: r8169-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 27176
Filename: r8169-firmware_20200619-1_mipsel_mips32.ipk
Size: 27881
SHA256sum:2af3afae76a2b83944b206c15d6dd5d915ba57c2e094486ed4bdd193e76b081e
Description:  RealTek RTL8169 firmware

Package: radeon-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 3523076
Filename: radeon-firmware_20200619-1_mipsel_mips32.ipk
Size: 3518349
SHA256sum:05060e0e38da4090fda9e2e855cddecddb051fb8d9a5d000baba5972a6a1f1f7
Description:  Radeon Video Driver firmware

Package: ravpower-mcu
Version: 2020-06-19-1665d9e9-2
Depends: libc
License: GPL-2.0-or-later
Section: utils
Architecture: mipsel_mips32
Installed-Size: 1990
Filename: ravpower-mcu_2020-06-19-1665d9e9-2_mipsel_mips32.ipk
Size: 2760
SHA256sum:9a8ba512ef139fc13ac192399300fee79132d6810411db8d058bbfc48dd1fb5e
Description:  Utility to control the RAVPower RP-WD009 PMIC

Package: rdma
Version: 5.7.0-2
Depends: libc, libmnl0, libelf1
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 19432
Filename: rdma_5.7.0-2_mipsel_mips32.ipk
Size: 20179
SHA256sum:e49eeb513c7c136a57fd015bb0f304cc322250c528fb7edc1ec7045dafbff5f6
Description:  Network rdma utility

Package: relayd
Version: 2020-04-25-f4d759be-1
Depends: libc, libubox20191228
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 10144
Filename: relayd_2020-04-25-f4d759be-1_mipsel_mips32.ipk
Size: 10907
SHA256sum:3e5fc00a3c962fa8d99f2c365f4bff386c22dfb7bab5b4a26abd8b6ddf12c3d9
Description:  Transparent routing / relay daemon

Package: rename
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 4440
Filename: rename_2.35.1-2_mipsel_mips32.ipk
Size: 5246
SHA256sum:1efc1bc27cf1e7bf6b958cce68d0e37d79889f7d2eae6728970e361531d134b7
Description:  rename will rename the specified files by replacing the first occurrence of
 expression in their name by replacement

Package: resize2fs
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 24825
Filename: resize2fs_1.45.6-1_mipsel_mips32.ipk
Size: 25433
SHA256sum:c51ae271d53db6c911d542d11dfe5581e45e36cda3fb0c5ddf85884fa8772056
Description:  Ext2 Filesystem resize utility

Package: resolveip
Version: 2
Depends: libc
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 1854
Filename: resolveip_2_mipsel_mips32.ipk
Size: 2732
SHA256sum:34b62f06769a3b9380bde8759ee1092f68fed5bbb07585b140aa6a9aece6accd
Description:  This package contains the small resolveip utility which
 can be used by scripts to turn host names into numeric
 IP addresses. It supports IPv4 and IPv6 resolving and
 has a configurable timeout to guarantee a certain maximum
 runtime in case of slow or defunct DNS servers.

Package: rpcd-mod-file
Version: 2020-05-26-078bb57e-1
Depends: libc, libubus20191227, libubox20191228, rpcd
License: ISC
Section: utils
Architecture: mipsel_mips32
Installed-Size: 7321
Filename: rpcd-mod-file_2020-05-26-078bb57e-1_mipsel_mips32.ipk
Size: 8133
SHA256sum:3cfe64da9ec29192b81efdc399fdf490821ff1c6155ee3cb5654d2685b5b3599
Description:  Provides ubus calls for file and directory operations.

Package: rpcd-mod-iwinfo
Version: 2020-05-26-078bb57e-1
Depends: libc, libubus20191227, libubox20191228, rpcd, libiwinfo20200105
License: ISC
Section: utils
Architecture: mipsel_mips32
Installed-Size: 7363
Filename: rpcd-mod-iwinfo_2020-05-26-078bb57e-1_mipsel_mips32.ipk
Size: 8170
SHA256sum:6e9242b4f32b5580964c7c2c57dd2a023bfef215e91ae900cb373c40248a59b8
Description:  Provides ubus calls for accessing iwinfo data.

Package: rpcd-mod-rpcsys
Version: 2020-05-26-078bb57e-1
Depends: libc, libubus20191227, libubox20191228, rpcd
License: ISC
Section: utils
Architecture: mipsel_mips32
Installed-Size: 3728
Filename: rpcd-mod-rpcsys_2020-05-26-078bb57e-1_mipsel_mips32.ipk
Size: 4476
SHA256sum:a0bc0b10b49e931c6b4ff262b44e9f1e071e3558e74f167ad23805aeaddfd6fb
Description:  Provides ubus calls for sysupgrade and password changing.

Package: rpcd
Version: 2020-05-26-078bb57e-1
Depends: libc, libubus20191227, libubox20191228, libuci20130104, libblobmsg-json, libjson-c5
License: ISC
Section: utils
Architecture: mipsel_mips32
Installed-Size: 24813
Filename: rpcd_2020-05-26-078bb57e-1_mipsel_mips32.ipk
Size: 25524
SHA256sum:ee6ac9a97760846733cc15b0c3b6e9432c6091a8af9b9143d6b18094fbfbd7da
Description:  This package provides the UBUS RPC backend server to expose various
 functionality to frontend programs via JSON-RPC.

Package: rs9113-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 84653
Filename: rs9113-firmware_20200619-1_mipsel_mips32.ipk
Size: 85199
SHA256sum:5594486d6300fd056ea96e73140758f3381bb678404661c7bdaa701b8100205a
Description:  RedPine Signals rs9113 firmware

Package: rssileds
Version: 3
Depends: libc, libiwinfo20200105, libnl-tiny, libubox20191228, libuci20130104
Section: net
Architecture: mipsel_mips32
Installed-Size: 3608
Filename: rssileds_3_mipsel_mips32.ipk
Size: 4375
SHA256sum:0d6a2a616dc87431d08e830caaf574e4329317b5e540c3d107b95e18058a3863
Description:  A small process written in C to update the signal-strength indicator LEDs

Package: rt2800-pci-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 3959
Filename: rt2800-pci-firmware_20200619-1_mipsel_mips32.ipk
Size: 4667
SHA256sum:efb8fdab70c9f826e658f7dbafafb3d16a23a509d52d7c4674c55e4b3acb6f02
Description:  Ralink RT28xx/3xxx PCI/SoC firmware

Package: rt2800-usb-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 2930
Filename: rt2800-usb-firmware_20200619-1_mipsel_mips32.ipk
Size: 3631
SHA256sum:1b103d38a114db9374bda68038a484e74a4f41db3a3dd330a39d4b1b401db517
Description:  Ralink RT28xx/3xxx USB firmware

Package: rt61-pci-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 6496
Filename: rt61-pci-firmware_20200619-1_mipsel_mips32.ipk
Size: 7210
SHA256sum:53b110370d72fe5462af1c54655d0828d4070bfc683a9d7c674bf3e59a5b673f
Description:  Ralink RT2561 firmware

Package: rt73-usb-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 1311
Filename: rt73-usb-firmware_20200619-1_mipsel_mips32.ipk
Size: 2021
SHA256sum:84987107c319b241413379adcce58599fc9a0928b9c0f2247dea82884d36851a
Description:  Ralink RT2573 firmware

Package: rtl8188eu-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 8287
Filename: rtl8188eu-firmware_20200619-1_mipsel_mips32.ipk
Size: 9038
SHA256sum:8cde21dd8c88c27712463ba0254c32f8263f827d81c9bed41417ab444d05712a
Description:  RealTek RTL8188EU firmware

Package: rtl8192ce-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 20753
Filename: rtl8192ce-firmware_20200619-1_mipsel_mips32.ipk
Size: 21444
SHA256sum:e3046fd15e2e6a49a615618cfc28ce2317ce9fbea753756215a178935e97ffaf
Description:  RealTek RTL8192CE firmware

Package: rtl8192cu-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 16950
Filename: rtl8192cu-firmware_20200619-1_mipsel_mips32.ipk
Size: 17645
SHA256sum:28b76d8a26a8c4f0e71ada9d2fdee88e1cb80bbefd55e72faabe5c94f0163473
Description:  RealTek RTL8192CU firmware

Package: rtl8192de-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 13523
Filename: rtl8192de-firmware_20200619-1_mipsel_mips32.ipk
Size: 14234
SHA256sum:39f1adf806b2ac2ac5ba13baa34b86e4bbe3ab21795e39b14ee69a9928ac83aa
Description:  RealTek RTL8192DE firmware

Package: rtl8192eu-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 17864
Filename: rtl8192eu-firmware_20200619-1_mipsel_mips32.ipk
Size: 18585
SHA256sum:1a30ea8930075a1aaf27166e3fec013e912900f6afab900a2508ae293501dd7b
Description:  RealTek RTL8192EU firmware

Package: rtl8192se-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 36769
Filename: rtl8192se-firmware_20200619-1_mipsel_mips32.ipk
Size: 37452
SHA256sum:23a638ebb45c363553cb77189b9927bff39ee7ca4c74b8bdad4d461e6d5ecaf1
Description:  RealTek RTL8192SE firmware

Package: rtl8192su-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 63225
Filename: rtl8192su-firmware_20200619-1_mipsel_mips32.ipk
Size: 63977
SHA256sum:460e3afdcedb26ef6a177d8adabea6d9bf317113a1528d9f004d7f4bddc00011
Description:  RealTek RTL8192SU firmware

Package: rtl8723au-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 27984
Filename: rtl8723au-firmware_20200619-1_mipsel_mips32.ipk
Size: 28686
SHA256sum:2758cd123ea4643a581122657c2f43a089dd9bc5718d0f8d2c5f8a37bd268e4b
Description:  RealTek RTL8723AU firmware

Package: rtl8723bs-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 56072
Filename: rtl8723bs-firmware_20200619-1_mipsel_mips32.ipk
Size: 56794
SHA256sum:0844a12b90fa5f9e271d03b4e0e2c739165e32f955ded21eb60f27ef342944a5
Description:  RealTek RTL8723BS firmware

Package: rtl8723bu-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 21386
Filename: rtl8723bu-firmware_20200619-1_mipsel_mips32.ipk
Size: 22093
SHA256sum:b1c899d4a51a33eb6cef930ec1c25a59e85259374e84cefa3c0330ae8029a74f
Description:  RealTek RTL8723BU firmware

Package: rtl8821ae-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 23991
Filename: rtl8821ae-firmware_20200619-1_mipsel_mips32.ipk
Size: 24662
SHA256sum:1db84456d9271183519f17eb961a708eb08236e52ff9a03a6dfe8cc56adb246e
Description:  RealTek RTL8821AE firmware

Package: rtl8822be-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 82176
Filename: rtl8822be-firmware_20200619-1_mipsel_mips32.ipk
Size: 82952
SHA256sum:848789dc59e2a0137985fde11acd4c853eff8b31dc7b156366bc50841fd399b7
Description:  RealTek RTL8822BE firmware

Package: rtl8822ce-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 158697
Filename: rtl8822ce-firmware_20200619-1_mipsel_mips32.ipk
Size: 159327
SHA256sum:2fa4637612bcd7176a551b47e6cbeb17aa6b31e63413417fadbc005bd0acb9f3
Description:  RealTek RTL8822CE firmware

Package: script-utils
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 36967
Filename: script-utils_2.35.1-2_mipsel_mips32.ipk
Size: 37785
SHA256sum:2e05134c678c0c5a1e10c5918ceac553f62b079bf5ca28001d325629ca2302bf
Description:  contains: script, scriptreplay

Package: setterm
Version: 2.35.1-2
Depends: libc, libncurses6
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 14177
Filename: setterm_2.35.1-2_mipsel_mips32.ipk
Size: 14988
SHA256sum:565af3934d7ade21936d6295ed0880c129f0668cf39e877f0e2c2eb0f640b883
Description:  setterm writes to standard output a character string that will invoke the
 specified terminal capabilities

Package: sfdisk
Version: 2.35.1-2
Depends: libc, libblkid1, libfdisk1, libsmartcols1, libncursesw6
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 48950
Filename: sfdisk_2.35.1-2_mipsel_mips32.ipk
Size: 49762
SHA256sum:db605ab0cb23b42d85da1c8920e75620b567d840ec4fe57b997141bb3513589a
Description:  list the size of a partition, list the partitions on a device, check the
 partitions on a device and repartition a device

Package: sockd
Version: 1.4.1-4
Depends: libc
License: BSD-4-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 290959
Filename: sockd_1.4.1-4_mipsel_mips32.ipk
Size: 291666
SHA256sum:5468db0ae195e3c6ef701795d92ad7ca2bd9a1a63a28284ccc003f4642608010
Description:  Dante is a circuit-level firewall/proxy that can be used to provide convenient
 and secure network connectivity, requiring only that the server Dante runs on
 has external network connectivity. Dante is used daily by Fortune 100 companies
 and large international organizations, either as a standard SOCKS server or as
 a "reverse proxy".
 This package provides the Dante sockd daemon.

Package: socksify
Version: 1.4.1-4
Depends: libc
License: BSD-4-Clause
Section: net
Architecture: mipsel_mips32
Installed-Size: 157548
Filename: socksify_1.4.1-4_mipsel_mips32.ipk
Size: 158418
SHA256sum:f17cdbe3919b4934f8e49c588072b9cc0939766af29c9d7074c4a0410c288fc1
Description:  Dante is a circuit-level firewall/proxy that can be used to provide convenient
 and secure network connectivity, requiring only that the server Dante runs on
 has external network connectivity. Dante is used daily by Fortune 100 companies
 and large international organizations, either as a standard SOCKS server or as
 a "reverse proxy".
 This package provides the Dante socksify client.

Package: soloscli
Version: 1.04-3
Depends: libc, kmod-solos-pci
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 3404
Filename: soloscli_1.04-3_mipsel_mips32.ipk
Size: 4148
SHA256sum:7f784e63a01e3c7b3e98cd0d37a3711f21c0c560a41302d952fe1de26851c6f8
Description:  This package contains the soloscli utility
 for interrogating Traverse Technologies' Solos ADSL2+ modems.

Package: ss
Version: 5.7.0-2
Depends: libc, libnl-tiny, libmnl0, libelf1, kmod-netlink-diag
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 38955
Filename: ss_5.7.0-2_mipsel_mips32.ipk
Size: 39700
SHA256sum:467a98fc90885f027125663d01d60ee564d98a9c47a6c5000cb60cde865d4fad
Description:  Socket statistics utility

Package: strace
Version: 5.5-1
Depends: libc
License: LGPL-2.1-or-later
Section: utils
CPE-ID: cpe:/a:paul_kranenburg:strace
Architecture: mipsel_mips32
Installed-Size: 267263
Filename: strace_5.5-1_mipsel_mips32.ipk
Size: 266083
SHA256sum:60ae48a3287bc3b5716a051b22b825e7ec0651d4989e44dce912c958bc62d782
Description:  A useful diagnostic, instructional, and debugging tool. Allows you to track what
 system calls a program makes while it is running.

Package: swap-utils
Version: 2.35.1-2
Depends: libc, librt, libblkid1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 41243
Filename: swap-utils_2.35.1-2_mipsel_mips32.ipk
Size: 42055
SHA256sum:be0d0ce9d2e8ca1e4e4b51925af8119631a26475330f1a4b626449ae84ab62b3
Description:  contains: mkswap, swaplabel

Package: swconfig
Version: 12
Depends: libc, libuci20130104, libnl-tiny
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 8743
Filename: swconfig_12_mipsel_mips32.ipk
Size: 9455
SHA256sum:57cbb2925784f7c64cef28d3357c7bb832e6a7ddf60a6ca2cc89e7e2f6a2bc88
Description:  Switch configuration utility

Package: sysfsutils
Version: 2.1.0-3
Depends: libc, libsysfs2
License: LGPL-2.1
Section: utils
Architecture: mipsel_mips32
Installed-Size: 8210
Filename: sysfsutils_2.1.0-3_mipsel_mips32.ipk
Size: 9048
SHA256sum:f782c845595da1922e2e32a8318a7c2864cb5731a04cc87d5695c802ccd36b2c
Description:  A utility built upon libsysfs that lists devices by bus, class, and topology.

Package: tc
Version: 5.7.0-2
Depends: libc, kmod-sched-core, libxtables12, libelf1, libmnl0
License: GPL-2.0
Section: net
CPE-ID: cpe:/a:iproute2_project:iproute2
Architecture: mipsel_mips32
Installed-Size: 164541
Filename: tc_5.7.0-2_mipsel_mips32.ipk
Size: 164925
SHA256sum:c65f482ff81336dd89486502868b08e583c54507f3cd402c04f4b3371d96d0f7
Description:  Traffic control utility

Package: tcpdump-mini
Version: 4.9.3-1
Depends: libc, libpcap1
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:tcpdump:tcpdump
Architecture: mipsel_mips32
Installed-Size: 143970
Filename: tcpdump-mini_4.9.3-1_mipsel_mips32.ipk
Size: 144542
SHA256sum:9840438eb39cd60d52b6da32213108abb25e9f3d2bc58a4575116ed0937ff1ed
Description:  Network monitoring and data acquisition tool (minimal version)

Package: tcpdump
Version: 4.9.3-1
Depends: libc, libpcap1
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:tcpdump:tcpdump
Architecture: mipsel_mips32
Installed-Size: 315372
Filename: tcpdump_4.9.3-1_mipsel_mips32.ipk
Size: 315754
SHA256sum:f3e51536341e673ce73a26ded21208c8774f8fb00582af1cef6fc41ad4aaa609
Description:  Network monitoring and data acquisition tool

Package: terminfo
Version: 6.2-1
Depends: libc
License: MIT
Section: libs
Architecture: mipsel_mips32
Installed-Size: 6287
Filename: terminfo_6.2-1_mipsel_mips32.ipk
Size: 6935
SHA256sum:f206d78a3b3f3a5d79b0ee470a93481c8bc2f39549c559ad8e9d1d5c496337b9
Description:  Terminal Info Database (ncurses)

Package: thc-ipv6-address6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22770
Filename: thc-ipv6-address6_2.7-1_mipsel_mips32.ipk
Size: 23465
SHA256sum:a400c04f0f5449a5b8cce65b10e6ae07900fb138c18a0b7df01c470bbe80ca4b
Description:  This package contains the address6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-alive6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 35832
Filename: thc-ipv6-alive6_2.7-1_mipsel_mips32.ipk
Size: 36594
SHA256sum:d159b7f82a2b5f8497f738140c664f30f5e5eeea8108bd70b9177507c36564b3
Description:  This package contains the alive6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-covert-send6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 21424
Filename: thc-ipv6-covert-send6_2.7-1_mipsel_mips32.ipk
Size: 22161
SHA256sum:3d034bb16fcc81f8b6173d5624ee2b8f8bbb7cb4c9406366dc17d8dd34e7d7c5
Description:  This package contains the covert_send6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-covert-send6d
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 21427
Filename: thc-ipv6-covert-send6d_2.7-1_mipsel_mips32.ipk
Size: 22163
SHA256sum:70382d3cd9c02f63b75d2cf990917919d8499b341f5d113f2d15d7bf9d4c82af
Description:  This package contains the covert_send6d utility of the THC-IPv6 toolkit.

Package: thc-ipv6-denial6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 24104
Filename: thc-ipv6-denial6_2.7-1_mipsel_mips32.ipk
Size: 24804
SHA256sum:457a279314c64154205d228669bde67eec3b2a166448df3e591d2c7c1040fbbc
Description:  This package contains the denial6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-detect-new-ip6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22279
Filename: thc-ipv6-detect-new-ip6_2.7-1_mipsel_mips32.ipk
Size: 22976
SHA256sum:ba7df56f44e3120665443427c2743740f32ce8edfaa004a0f02bda2706ec51dd
Description:  This package contains the detect-new-ip6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-detect-sniffer6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22987
Filename: thc-ipv6-detect-sniffer6_2.7-1_mipsel_mips32.ipk
Size: 23695
SHA256sum:1bf5217a3fd2f2466c0a0a8e35f5f73421c58f601167b8a499d14700ef50ad9f
Description:  This package contains the detect_sniffer6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-dnsdict6
Version: 2.7-1
Depends: libc, libpcap1, libpthread
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 98377
Filename: thc-ipv6-dnsdict6_2.7-1_mipsel_mips32.ipk
Size: 84558
SHA256sum:ee33125f4516c76924a8dabf1408ff6b09d016ccd506dca96d9dab57657dd735
Description:  This package contains the dnsdict6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-dnsrevenum6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 24574
Filename: thc-ipv6-dnsrevenum6_2.7-1_mipsel_mips32.ipk
Size: 25268
SHA256sum:9b92e42ff7fa81163eed0adb4e655e195f0919afe5220fb4e788bb6aa888388e
Description:  This package contains the dnsrevenum6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-dos-new-ip6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22747
Filename: thc-ipv6-dos-new-ip6_2.7-1_mipsel_mips32.ipk
Size: 23450
SHA256sum:107542c873d55f0699c667b26bdd8af3c2516e10e924433424252ac0779bf052
Description:  This package contains the dos-new-ip6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-dump-router6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23537
Filename: thc-ipv6-dump-router6_2.7-1_mipsel_mips32.ipk
Size: 24236
SHA256sum:d97506afefac543be11816465b50db06d3c2b4fc1d2b84ad49ac305bbc8d4e70
Description:  This package contains the dump_router6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-exploit6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23761
Filename: thc-ipv6-exploit6_2.7-1_mipsel_mips32.ipk
Size: 24444
SHA256sum:742c62615c7504efcb87454f85a303de6865b5ab41368d2c21451bf56b892954
Description:  This package contains the exploit6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-advertise6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23396
Filename: thc-ipv6-fake-advertise6_2.7-1_mipsel_mips32.ipk
Size: 24114
SHA256sum:86ec286b2358750efa5b8e06fc32e0445e8c0e3a3dc44a5edb8c69ef8b8bc455
Description:  This package contains the fake_advertise6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-dhcps6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23877
Filename: thc-ipv6-fake-dhcps6_2.7-1_mipsel_mips32.ipk
Size: 24585
SHA256sum:eca1537fbfac5c41bcad0f733cc033f4ed2f4563795a6e6432350245729c9b82
Description:  This package contains the fake_dhcps6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-dns6d
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22817
Filename: thc-ipv6-fake-dns6d_2.7-1_mipsel_mips32.ipk
Size: 23505
SHA256sum:92e921d71eb2b21778c081d3ec563e1c5d2720eb087aee20df5cfca21e9ee126
Description:  This package contains the fake_dns6d utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-dnsupdate6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22660
Filename: thc-ipv6-fake-dnsupdate6_2.7-1_mipsel_mips32.ipk
Size: 23348
SHA256sum:a5d98459fa05d372ed68a2eec251e36dca4be9d939bf9ec9feeb341e6dfb5c5b
Description:  This package contains the fake_dnsupdate6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-mipv6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22230
Filename: thc-ipv6-fake-mipv6_2.7-1_mipsel_mips32.ipk
Size: 22923
SHA256sum:8eaa84974abcbe902520ad60c4bc32b1523cbce4fabfa2006d8c1f50dbd85101
Description:  This package contains the fake_mipv6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-mld26
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23513
Filename: thc-ipv6-fake-mld26_2.7-1_mipsel_mips32.ipk
Size: 24212
SHA256sum:1d8d198b32899849f8cf6e18db407474139e54e8f855d44086f1f597085f9ad1
Description:  This package contains the fake_mld26 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-mld6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23108
Filename: thc-ipv6-fake-mld6_2.7-1_mipsel_mips32.ipk
Size: 23803
SHA256sum:e40c43b050f0b582d1573a18f454a799123c428b33411fe37b4129a76588630a
Description:  This package contains the fake_mld6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-mldrouter6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22720
Filename: thc-ipv6-fake-mldrouter6_2.7-1_mipsel_mips32.ipk
Size: 23422
SHA256sum:beaed04d0dcc2a425f2dad5fdeaf5001fedf74065aec0e1bddb3334b0c0d00e3
Description:  This package contains the fake_mldrouter6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-router26
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 26472
Filename: thc-ipv6-fake-router26_2.7-1_mipsel_mips32.ipk
Size: 27192
SHA256sum:4471a41e8882e67a0e02666cfbbcd0e315a56c6c234c61afe9e5c81cc041f4cd
Description:  This package contains the fake_router26 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-router6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23691
Filename: thc-ipv6-fake-router6_2.7-1_mipsel_mips32.ipk
Size: 24362
SHA256sum:a571869181b9d34f6b36c59c4dd95bfc050eb632eb0eb5bf98f36b63398a8778
Description:  This package contains the fake_router6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fake-solicitate6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22706
Filename: thc-ipv6-fake-solicitate6_2.7-1_mipsel_mips32.ipk
Size: 23412
SHA256sum:e24d162cc3f2140ae21f269f402b0fa2aa0ced4e7d0fa6072eb61dce8798c319
Description:  This package contains the fake_solicitate6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-advertise6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22546
Filename: thc-ipv6-flood-advertise6_2.7-1_mipsel_mips32.ipk
Size: 23241
SHA256sum:b13abfecade80e8997cbad8293a3e649cd86749d0a22770d8c529759095f0791
Description:  This package contains the flood_advertise6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-dhcpc6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23969
Filename: thc-ipv6-flood-dhcpc6_2.7-1_mipsel_mips32.ipk
Size: 24617
SHA256sum:6ea1d7a3f4676f363eca125e661edd111333ba68ff70be17603703380cdd9ce7
Description:  This package contains the flood_dhcpc6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-mld26
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22436
Filename: thc-ipv6-flood-mld26_2.7-1_mipsel_mips32.ipk
Size: 23143
SHA256sum:0b63ce41c693d756ce99aee3d0be8b4c19db2031048c2a0f3f2b1ad68a5d6a0e
Description:  This package contains the flood_mld26 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-mld6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22307
Filename: thc-ipv6-flood-mld6_2.7-1_mipsel_mips32.ipk
Size: 23003
SHA256sum:fd522c3537fbcdd2543c9a70bb5761ea161ddad116da532e3de6d7d06b883765
Description:  This package contains the flood_mld6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-mldrouter6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22258
Filename: thc-ipv6-flood-mldrouter6_2.7-1_mipsel_mips32.ipk
Size: 22968
SHA256sum:e1fd9a0e42794fb091b62b30764522270e1ff6a5a306ead1ee2456bd16a524ab
Description:  This package contains the flood_mldrouter6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-router26
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 24159
Filename: thc-ipv6-flood-router26_2.7-1_mipsel_mips32.ipk
Size: 24855
SHA256sum:940dbdff70f17f311e4d1096bcb680f667d3bba0a73024814ad80674963ff6df
Description:  This package contains the flood_router26 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-router6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22849
Filename: thc-ipv6-flood-router6_2.7-1_mipsel_mips32.ipk
Size: 23555
SHA256sum:ee5d7f1eabaf85141339563b7dfd3d7c5196a4f897fce523ae4a2c0106ef69ac
Description:  This package contains the flood_router6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-flood-solicitate6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22790
Filename: thc-ipv6-flood-solicitate6_2.7-1_mipsel_mips32.ipk
Size: 23502
SHA256sum:69127c13d91633c3cc59f861307d3f4a914007ee13aebfca922c1a5f75ffc8a0
Description:  This package contains the flood_solicitate6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fragmentation6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 30725
Filename: thc-ipv6-fragmentation6_2.7-1_mipsel_mips32.ipk
Size: 31455
SHA256sum:7cd8757182da966d189900445a3a251077a385fb6249a2b5dad68a6bb7d3b3e8
Description:  This package contains the fragmentation6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fuzz-dhcpc6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 28423
Filename: thc-ipv6-fuzz-dhcpc6_2.7-1_mipsel_mips32.ipk
Size: 29150
SHA256sum:0e8e4155f6130ee3135bb4587c4980492ee8c4a777d03d9d224e22d13e665c7b
Description:  This package contains the fuzz_dhcpc6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fuzz-dhcps6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 28113
Filename: thc-ipv6-fuzz-dhcps6_2.7-1_mipsel_mips32.ipk
Size: 28813
SHA256sum:b413866ebd06e3ec07ce4161f6d7bf584b9f42671b31e62bfb7fae3c4fa42aa2
Description:  This package contains the fuzz_dhcps6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-fuzz-ip6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 28563
Filename: thc-ipv6-fuzz-ip6_2.7-1_mipsel_mips32.ipk
Size: 29269
SHA256sum:739549423a42da0f564cc32e83a6d8b5236fb1601a1360663b298538609e6f55
Description:  This package contains the fuzz_ip6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-implementation6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 31355
Filename: thc-ipv6-implementation6_2.7-1_mipsel_mips32.ipk
Size: 32064
SHA256sum:eb3bd2a6a6b921f87963f1feb1d6d09d869c943045bb02c80803a3ae7f6ec03c
Description:  This package contains the implementation6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-implementation6d
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22495
Filename: thc-ipv6-implementation6d_2.7-1_mipsel_mips32.ipk
Size: 23187
SHA256sum:336b4e473bcdfe8540fdf60df7491613dfec8cf4702f48d7bb6585dffd5990ce
Description:  This package contains the implementation6d utility of the THC-IPv6 toolkit.

Package: thc-ipv6-inverse-lookup6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22579
Filename: thc-ipv6-inverse-lookup6_2.7-1_mipsel_mips32.ipk
Size: 23261
SHA256sum:e317472d02973afbc026af55ee8c2f998455e2459c62407260283934bf49591c
Description:  This package contains the inverse_lookup6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-kill-router6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23284
Filename: thc-ipv6-kill-router6_2.7-1_mipsel_mips32.ipk
Size: 23955
SHA256sum:4d27df62e28060cb821e2e0095c33f7cb99a4a706255ef625fc75ce1237f59c5
Description:  This package contains the kill_router6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-ndpexhaust6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22333
Filename: thc-ipv6-ndpexhaust6_2.7-1_mipsel_mips32.ipk
Size: 23026
SHA256sum:19eea8e3d87716ba8b19608710ba6a46201fa15c9b529bcae7d9ba7a43c31610
Description:  This package contains the ndpexhaust6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-node-query6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22757
Filename: thc-ipv6-node-query6_2.7-1_mipsel_mips32.ipk
Size: 23454
SHA256sum:12e78ef4476c49ea591977824f77fcbfca04813da003a01dd10411c26904eb6f
Description:  This package contains the node_query6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-parasite6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 24600
Filename: thc-ipv6-parasite6_2.7-1_mipsel_mips32.ipk
Size: 25287
SHA256sum:4238439c37f0516f4ff26c8b394997e784991f625556b8ecce7efae323cd595c
Description:  This package contains the parasite6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-passive-discovery6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23312
Filename: thc-ipv6-passive-discovery6_2.7-1_mipsel_mips32.ipk
Size: 24024
SHA256sum:0a71349f02ded63d25addc079fd55931083ab8d5018f792731455ebb4b302db6
Description:  This package contains the passive_discovery6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-randicmp6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22475
Filename: thc-ipv6-randicmp6_2.7-1_mipsel_mips32.ipk
Size: 23169
SHA256sum:460c8cd59b5f660250c19262801b6b23a9da1b8110754f3812c47f1d985038e5
Description:  This package contains the randicmp6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-redir6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22388
Filename: thc-ipv6-redir6_2.7-1_mipsel_mips32.ipk
Size: 23078
SHA256sum:85949e9181237df17d5a47a69c18158145f3aa308031b7a97cd40a7743307823
Description:  This package contains the redir6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-rsmurf6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22070
Filename: thc-ipv6-rsmurf6_2.7-1_mipsel_mips32.ipk
Size: 22761
SHA256sum:7e2e757cf10ae9a12a8f209ca226289168bfef1b5f873f3aa4076e7b0bd46e58
Description:  This package contains the rsmurf6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-sendpees6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 21420
Filename: thc-ipv6-sendpees6_2.7-1_mipsel_mips32.ipk
Size: 22154
SHA256sum:00ec7ac9fceccad9793bdf5d9edb16d92404070945681a5d284cf80e52266ee8
Description:  This package contains the sendpees6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-sendpeesmp6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 21422
Filename: thc-ipv6-sendpeesmp6_2.7-1_mipsel_mips32.ipk
Size: 22157
SHA256sum:4e667f83dc78b0d69f0c9ffb62431f655ea1e33468fdb62c2c7fe0d37b55ba03
Description:  This package contains the sendpeesmp6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-smurf6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22068
Filename: thc-ipv6-smurf6_2.7-1_mipsel_mips32.ipk
Size: 22755
SHA256sum:510deb2a88bb4681b72573e9cbc83232a94ccd9807d78fc6e962e9906bfd29a3
Description:  This package contains the smurf6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-thcping6
Version: 2.7-1
Depends: libc, libpcap1, librt
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 26557
Filename: thc-ipv6-thcping6_2.7-1_mipsel_mips32.ipk
Size: 27227
SHA256sum:e0a132931fe62e3d237819aee0ba4fc36d9245846bc0fa2644fc3cb5031778e0
Description:  This package contains the thcping6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-toobig6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 22307
Filename: thc-ipv6-toobig6_2.7-1_mipsel_mips32.ipk
Size: 23002
SHA256sum:f288f7f95a9a324025e64c93249a99aa0243565e91471d75a8f993038428d650
Description:  This package contains the toobig6 utility of the THC-IPv6 toolkit.

Package: thc-ipv6-trace6
Version: 2.7-1
Depends: libc, libpcap1
License: GPL-3.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 26493
Filename: thc-ipv6-trace6_2.7-1_mipsel_mips32.ipk
Size: 27203
SHA256sum:d3b0c6e96dd41acf68d4a206a687b10ac9191f016cd8b0a6184987a4f5cdeb0a
Description:  This package contains the trace6 utility of the THC-IPv6 toolkit.

Package: ti-3410-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 7878
Filename: ti-3410-firmware_20200619-1_mipsel_mips32.ipk
Size: 8608
SHA256sum:087fef7816a5b7a703ad0d9c87142ce5a28e499548282dc84702cf5f5ef2a140
Description:  TI 3410 firmware

Package: ti-5052-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 7854
Filename: ti-5052-firmware_20200619-1_mipsel_mips32.ipk
Size: 8586
SHA256sum:88157d572f5dc42ce1c1830cf5abead7a98095524b3d84ccd5f7e95656885022
Description:  TI 5052 firmware

Package: trace-cmd-extra
Version: v2.6.1-2
Depends: libc
License: GPL-2.0
Section: devel
Architecture: mipsel_mips32
Installed-Size: 10470
Filename: trace-cmd-extra_v2.6.1-2_mipsel_mips32.ipk
Size: 11084
SHA256sum:e5b4935fb91d571245cc45034d5e267798ae8662cd0af612ecba8b838ec89603
Description:  Extra plugins for trace-cmd

Package: trace-cmd
Version: v2.6.1-2
Depends: libc
License: GPL-2.0
Section: devel
Architecture: mipsel_mips32
Installed-Size: 138251
Filename: trace-cmd_v2.6.1-2_mipsel_mips32.ipk
Size: 138813
SHA256sum:de066f31c8246cbfa6b08c0fe310bfbd2afa0ccd4af7344d0a91138f351fdecc
Description:  Linux trace command line utility

Package: tune2fs
Version: 1.45.6-1
Depends: libc, e2fsprogs
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:e2fsprogs_project:e2fsprogs
Architecture: mipsel_mips32
Installed-Size: 35504
Filename: tune2fs_1.45.6-1_mipsel_mips32.ipk
Size: 35919
SHA256sum:1da5dd92d4bd3be2eafc7138819d5789fcac67d1644338124300eb21f2b42ce4
Description:  Ext2 Filesystem tune utility

Package: ubox
Version: 2019-12-31-0e34af14-4
Depends: libc, libubox20191228, ubusd, ubus, libubus20191227, libuci20130104
Alternatives: 100:/sbin/rmmod:/sbin/kmodloader, 100:/sbin/insmod:/sbin/kmodloader, 100:/sbin/lsmod:/sbin/kmodloader, 100:/sbin/modinfo:/sbin/kmodloader, 100:/sbin/modprobe:/sbin/kmodloader
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 15772
Filename: ubox_2019-12-31-0e34af14-4_mipsel_mips32.ipk
Size: 16535
SHA256sum:a130e4056fd14cb9a0545ff82e84fd1519431c036bf10eb8b0a59bb3ecf0bd51
Description:  OpenWrt system helper toolbox

Package: ubus
Version: 2020-02-05-171469e3-1
Depends: libc, libubus20191227, libblobmsg-json, ubusd
License: LGPL-2.1
Section: base
Architecture: mipsel_mips32
Installed-Size: 6077
Filename: ubus_2020-02-05-171469e3-1_mipsel_mips32.ipk
Size: 6831
SHA256sum:cf5766439b0098b4555e00f024c26302973f54ad24475456140edc56c6897eec
Description:  OpenWrt RPC client utility

Package: ubusd
Version: 2020-02-05-171469e3-1
Depends: libc, libubox20191228, libblobmsg-json
License: LGPL-2.1
Section: base
Architecture: mipsel_mips32
Installed-Size: 12897
Filename: ubusd_2020-02-05-171469e3-1_mipsel_mips32.ipk
Size: 13606
SHA256sum:66bfb505ae120cc854ceb177c0983e3e9fc8ad133c6e2846629343799f09ca16
Description:  OpenWrt RPC daemon

Package: ucert-full
Version: 2020-05-24-00b921d8-1
Depends: libc, usign, libubox20191228, libjson-c5, libblobmsg-json
Provides: ucert
License: GPL-3.0+
Section: base
Architecture: mipsel_mips32
Installed-Size: 7541
Filename: ucert-full_2020-05-24-00b921d8-1_mipsel_mips32.ipk
Size: 8366
SHA256sum:ce564040661d9822e13ddd39c6b77ab5a33cb671035d95a5f161b236f4c82f55
Description:  OpenWrt certificate generation and verification utility

Package: ucert
Version: 2020-05-24-00b921d8-1
Depends: libc, usign, libubox20191228
Conflicts: ucert-full
License: GPL-3.0+
Section: base
Architecture: mipsel_mips32
Installed-Size: 5171
Filename: ucert_2020-05-24-00b921d8-1_mipsel_mips32.ipk
Size: 5906
SHA256sum:3eb62fc38d9c53f5e45086183d73e0f0ff353e89012cbc55b56fa95b9a50de39
Description:  OpenWrt certificate verification utility

Package: uci
Version: 2020-04-24-ec8d3233-3
Depends: libc, libuci20130104
License: LGPL-2.1
Section: base
Architecture: mipsel_mips32
Installed-Size: 7089
Filename: uci_2020-04-24-ec8d3233-3_mipsel_mips32.ipk
Size: 7849
SHA256sum:2f697a044758be3ca5a296254e06f75ba08047f7868d5a9541e7cdde8d06d71e
Description:  Utility for the Unified Configuration Interface (UCI)

Package: uclibcxx
Version: 0.2.5-3
Depends: libc
License: LGPL-2.1-or-later
Section: libs
Architecture: mipsel_mips32
Installed-Size: 66221
Filename: uclibcxx_0.2.5-3_mipsel_mips32.ipk
Size: 66850
SHA256sum:5f77c6a38ce609fad180bd751626d3e89e37e008da250807be650cd454cebc4e
Description:  C++ library for embedded systems

Package: uclient-fetch
Version: 2020-06-17-c6609861-1
Depends: libc, libuclient20160123
Provides: wget
Alternatives: 200:/usr/bin/wget:/bin/uclient-fetch
License: ISC
Section: net
Architecture: mipsel_mips32
Installed-Size: 7562
Filename: uclient-fetch_2020-06-17-c6609861-1_mipsel_mips32.ipk
Size: 8371
SHA256sum:773c347166f553fa64bfdb0630791d99a5195a1301094f4bf0620dead43f4c5c
Description:  Tiny wget replacement using libuclient

Package: ugps
Version: 2020-05-29-0c54380e-1
Depends: libc, libubox20191228, libubus20191227
License: GPL-2.0+
Section: utils
Architecture: mipsel_mips32
Installed-Size: 5655
Filename: ugps_2020-05-29-0c54380e-1_mipsel_mips32.ipk
Size: 6435
SHA256sum:5d76549bf612249c4b9bda3ad6d92d81abb23c66a535df1ec9b6c0643d165337
Description:  OpenWrt GPS Daemon

Package: uhttpd-mod-lua
Version: 2020-06-03-939c281c-1
Depends: libc, uhttpd, liblua5.1.5
License: ISC
Section: net
Architecture: mipsel_mips32
Installed-Size: 3838
Filename: uhttpd-mod-lua_2020-06-03-939c281c-1_mipsel_mips32.ipk
Size: 4581
SHA256sum:d769c4f1d7e487e728152bb7d1432c3ab89647288006950635680a6f5bac6fd0
Description:  The Lua plugin adds a CGI-like Lua runtime interface to uHTTPd.

Package: uhttpd-mod-ubus
Version: 2020-06-03-939c281c-1
Depends: libc, uhttpd, libubus20191227, libblobmsg-json
License: ISC
Section: net
Architecture: mipsel_mips32
Installed-Size: 6299
Filename: uhttpd-mod-ubus_2020-06-03-939c281c-1_mipsel_mips32.ipk
Size: 7144
SHA256sum:371b215be176c42ba2e1457901fa1fb0c3f04fb8259026403ba9ae1642c067c7
Description:  The ubus plugin adds a HTTP/JSON RPC proxy for ubus and publishes the
 session.* namespace and procedures.

Package: uhttpd
Version: 2020-06-03-939c281c-1
Depends: libc, libubox20191228, libblobmsg-json, libjson-script, libjson-c5
License: ISC
Section: net
Architecture: mipsel_mips32
Installed-Size: 29291
Filename: uhttpd_2020-06-03-939c281c-1_mipsel_mips32.ipk
Size: 30098
SHA256sum:110a240090a99765d12e466b7673be74fb66488ac7048e2456458e9a352db121
Description:  uHTTPd is a tiny single threaded HTTP server with TLS, CGI and Lua
 support. It is intended as a drop-in replacement for the Busybox
 HTTP daemon.

Package: umdns
Version: 2020-06-08-d13290b4-1
Depends: libc, libubox20191228, libubus20191227, libblobmsg-json
License: LGPL-2.1
Section: net
Architecture: mipsel_mips32
Installed-Size: 16203
Filename: umdns_2020-06-08-d13290b4-1_mipsel_mips32.ipk
Size: 16901
SHA256sum:7d5798580bfd0979e7a4ed9039b95ada6f010b8fae347c4f8ede0fd8db7e56cf
Description:  OpenWrt Multicast DNS Daemon

Package: unshare
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 12704
Filename: unshare_2.35.1-2_mipsel_mips32.ipk
Size: 13482
SHA256sum:865834bc0994287f4c3b22e1f8e7cc01385eb861fbbca4a55c598739b38ceb84
Description:  run programs with some namespaces unshared from parent

Package: urandom-seed
Version: 2
Depends: libc, getrandom
License: GPL-2.0-only
Section: base
Architecture: mipsel_mips32
Installed-Size: 830
Filename: urandom-seed_2_mipsel_mips32.ipk
Size: 1537
SHA256sum:78ac82c1bc716316bd289a520bd3e0b7fba3cf09bdac4075805597953fee1b54
Description:  /etc/urandom.seed handling for OpenWrt

Package: urngd
Version: 2020-01-21-c7f7b6b6-1
Depends: libc, libubox20191228
License: GPL-2.0 BSD-3-Clause
Section: utils
Architecture: mipsel_mips32
Installed-Size: 5443
Filename: urngd_2020-01-21-c7f7b6b6-1_mipsel_mips32.ipk
Size: 6401
SHA256sum:58c999f6576f9f101bb3c13f07c6b36f9fa4179768b944fb25347e87c9aa4c60
Description:  urngd is OpenWrt's micro non-physical true random number generator based on
 timing jitter.
 
 Using the Jitter RNG core, the rngd provides an entropy source that feeds into
 the Linux /dev/random device if its entropy runs low. It updates the
 /dev/random entropy estimator such that the newly provided entropy unblocks
 /dev/random.
 
 The seeding of /dev/random also ensures that /dev/urandom benefits from
 entropy. Especially during boot time, when the entropy of Linux is low, the
 Jitter RNGd provides a source of sufficient entropy.

Package: usb-modeswitch
Version: 2017-12-19-f40f84c2-2
Depends: libc, libubox20191228, libblobmsg-json, libusb-1.0-0
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 13194
Filename: usb-modeswitch_2017-12-19-f40f84c2-2_mipsel_mips32.ipk
Size: 13965
SHA256sum:7bc4d2ec1299597b22a7a9f9a89245a5744d1ccba2586f43737c8b21068728f4
Description:  USB mode switching utility

Package: usbreset
Version: 5
Depends: libc
Section: utils
Architecture: mipsel_mips32
Installed-Size: 2794
Filename: usbreset_5_mipsel_mips32.ipk
Size: 3559
SHA256sum:7597196b3af77296a9291c3161825126b53435c61062c7567c9dafe0e62f4da1
Description:  This package contains the small usbreset utility which
 can be used to send a USB port reset to a USB device -
 useful for debugging or to force re-detection of particular
 devices.

Package: usbutils
Version: 007-10
Depends: libc, libusb-1.0-0, librt, libpthread
License: GPL-2.0
Section: utils
Architecture: mipsel_mips32
Installed-Size: 245129
Filename: usbutils_007-10_mipsel_mips32.ipk
Size: 245609
SHA256sum:55eb61db4efa9bec5d24dc3e0179330e31693f476a95a8b1aca8d64675a1496a
Description:  USB devices listing utilities

Package: usign
Version: 2020-05-23-f1f65026-1
Depends: libc, libubox20191228
License: ISC
Section: base
Architecture: mipsel_mips32
Installed-Size: 11162
Filename: usign_2020-05-23-f1f65026-1_mipsel_mips32.ipk
Size: 11894
SHA256sum:2527767ab98700205c997a4f6ea4f201b98f60ea95b690f28b03c4fa3e722877
Description:  OpenWrt signature verification utility

Package: uuidd
Version: 2.35.1-2
Depends: libc, libuuid1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 13021
Filename: uuidd_2.35.1-2_mipsel_mips32.ipk
Size: 13919
SHA256sum:a741b8f366fc392b52a87f02d9a355e8e4755dfdf17ad16893fa3b4ce2441c0c
Description:  The uuidd daemon is used by the UUID library to generate universally unique
 identifiers (UUIDs), especially time-based UUIDs, in a secure and
 guaranteed-unique fashion, even in the face of large numbers of threads
 running on different CPUs trying to grab UUIDs.

Package: uuidgen
Version: 2.35.1-2
Depends: libc, libuuid1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 3537
Filename: uuidgen_2.35.1-2_mipsel_mips32.ipk
Size: 4429
SHA256sum:54c7ebfffcbc905d718118528ac3d49f6a2c55b7a66d8756439c4e9772315cc1
Description:  The uuidgen program creates (and prints) a new universally unique identifier
 (UUID) using the libuuid library. The new UUID can reasonably be considered
 unique among all UUIDs created on the local system, and among UUIDs created on
 other systems in the past and in the future.

Package: uxc
Version: 2020-07-17-268126a3-1
Depends: libc, procd-ujail, libubus20191227, libubox20191228, libblobmsg-json
License: GPL-2.0
Section: base
Architecture: mipsel_mips32
Installed-Size: 6213
Filename: uxc_2020-07-17-268126a3-1_mipsel_mips32.ipk
Size: 7007
SHA256sum:b5e82a7538b0435b82107c39843540eeda12fa337beae85ff77f62d0e9d942c8
Description:  OpenWrt container management

Package: valgrind-cachegrind
Version: 3.15.0-2
Depends: libc, valgrind
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 3484509
Filename: valgrind-cachegrind_3.15.0-2_mipsel_mips32.ipk
Size: 3345515
SHA256sum:af29eea2642307f1fb1fd0068705d3cf307f3146a2bd9322743b947c47750def
Description:  debugging and profiling tools for Linux (cache profiling)

Package: valgrind-callgrind
Version: 3.15.0-2
Depends: libc, valgrind
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 3650112
Filename: valgrind-callgrind_3.15.0-2_mipsel_mips32.ipk
Size: 3505087
SHA256sum:041157fce404d7faec3771a973b3d5c21fb57c63d7cc1f6b0f45779402217169
Description:  debugging and profiling tools for Linux (callgraph profiling)

Package: valgrind-drd
Version: 3.15.0-2
Depends: libc, valgrind
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 3704886
Filename: valgrind-drd_3.15.0-2_mipsel_mips32.ipk
Size: 3560032
SHA256sum:9901b06f9bc89d292d12c06ddc7affeb6a0f0e4c1531849b4d4e7750471b3143
Description:  debugging and profiling tools for Linux (thread error detection)

Package: valgrind-helgrind
Version: 3.15.0-2
Depends: libc, valgrind
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 3773018
Filename: valgrind-helgrind_3.15.0-2_mipsel_mips32.ipk
Size: 3625064
SHA256sum:e80e5f9d59eaaa00b7e003403b28e59116be8f5a91087e546a54f15cb9735339
Description:  debugging and profiling tools for Linux (thread debugging)

Package: valgrind-massif
Version: 3.15.0-2
Depends: libc, valgrind
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 3508455
Filename: valgrind-massif_3.15.0-2_mipsel_mips32.ipk
Size: 3366635
SHA256sum:4cbdbc47942d4460385b30d5af41b2918f23bf953f5c2517598019d604f990f3
Description:  debugging and profiling tools for Linux (heap profiling)

Package: valgrind-vgdb
Version: 3.15.0-2
Depends: libc, valgrind
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 16258
Filename: valgrind-vgdb_3.15.0-2_mipsel_mips32.ipk
Size: 16996
SHA256sum:4c1284a122e204cf9f9ff0cd77716e8df2f053a6ba9ee5826c1007b336dbfd7c
Description:  debugging and profiling tools for Linux (GDB interface)

Package: valgrind
Version: 3.15.0-2
Depends: libc, libpthread, librt
License: GPL-2.0+
Section: devel
CPE-ID: cpe:/a:valgrind:valgrind
Architecture: mipsel_mips32
Installed-Size: 1443273
Filename: valgrind_3.15.0-2_mipsel_mips32.ipk
Size: 1438753
SHA256sum:c8fe022e8f69b197198745bbd723be122b3c154d873c8ce5c488f437ce399d16
Description:  Valgrind is an award-winning suite of tools for debugging and
 profiling Linux programs. With the tools that come with Valgrind,
 you can automatically detect many memory management and threading
 bugs, avoiding hours of frustrating bug-hunting, making your
 programs more stable. You can also perform detailed profiling,
 to speed up and reduce memory use of your programs.

Package: vti
Version: 3
Depends: libc
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 1013
Filename: vti_3_all.ipk
Size: 1757
SHA256sum:37b70253d0686e2a96dc2b59d069652727b0bb8364af8263f644f80dd6c55fcb
Description:  Virtual IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

Package: vtiv4
Version: 3
Depends: libc, kmod-ip-vti
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 96
Filename: vtiv4_3_all.ipk
Size: 836
SHA256sum:8337d2bc3df3f7584934dede0c356101aa28ab250302b6f2fc777e5e719eee3f
Description:  Virtual IPsec Tunnel Interface config support (IPv4) in /etc/config/network.

Package: vtiv6
Version: 3
Depends: libc, kmod-ip6-vti
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 96
Filename: vtiv6_3_all.ipk
Size: 836
SHA256sum:c2dcc022614b1be4542f2434733f5b209072fc907f97b4e7a897c62594f5bb3d
Description:  Virtual IPsec Tunnel Interface config support (IPv6) in /etc/config/network.

Package: vxlan
Version: 3
Depends: libc, kmod-vxlan
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 996
Filename: vxlan_3_all.ipk
Size: 1750
SHA256sum:45f9c2860d40df658ada08da6df71f08d08e3ebf6c9aad3a9f7de705acc10199
Description:  Virtual eXtensible LAN config support in /etc/config/network.

Package: wall
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 10728
Filename: wall_2.35.1-2_mipsel_mips32.ipk
Size: 11529
SHA256sum:5e0aef83db8c9e62531d9a8be003a8b9ef952a06d87aa62ab202e1a10cdaae47
Description:  wall sends a message to everybody logged in with their mesg permission
 set to yes

Package: whereis
Version: 2.35.1-2
Depends: libc, librt
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 9064
Filename: whereis_2.35.1-2_mipsel_mips32.ipk
Size: 9873
SHA256sum:9d435d62332e4c04606f703ed418e83f47665a6d047cbb0e62b6798955d72acc
Description:  whereis locates source/binary and manuals sections for specified files

Package: wipefs
Version: 2.35.1-2
Depends: libc, libblkid1, libsmartcols1
License: GPL-2.0
Section: utils
CPE-ID: cpe:/a:kernel:util-linux
Architecture: mipsel_mips32
Installed-Size: 13581
Filename: wipefs_2.35.1-2_mipsel_mips32.ipk
Size: 14403
SHA256sum:cea2dcf4378b19486d025fa979a34f823a1f79b8a2ac34810d51ad71a72d4b1d
Description:  wipefs can erase filesystem, raid or partition table signatures (magic
 strings) from the specified device to make the signature invisible for
 libblkid.

Package: wireguard-tools
Version: 1.0.20200513-1
Depends: libc, ip
License: GPL-2.0
Section: opt
Architecture: mipsel_mips32
Installed-Size: 28496
Filename: wireguard-tools_1.0.20200513-1_mipsel_mips32.ipk
Size: 29254
SHA256sum:010e32939d7806b0748f532c22b6f1a41ae2aa9e6bb01118ca3ede279348a3b5
Description:  
 
 This package provides the userspace control program for WireGuard,
 `wg(8)`, a netifd protocol helper, and a re-resolve watchdog script.

Package: wireguard
Version: 1.0.20200712-1
Depends: libc, wireguard-tools, kmod-wireguard
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 96
Filename: wireguard_1.0.20200712-1_mipsel_mips32.ipk
Size: 1100
SHA256sum:7432688bbe8501d61ac913c3ce045f318be936e1692238eb1f24a9e518127f83
Description:  WireGuard is a novel VPN that runs inside the Linux Kernel and utilizes
 state-of-the-art cryptography. It aims to be faster, simpler, leaner, and
 more useful than IPSec, while avoiding the massive headache. It intends to
 be considerably more performant than OpenVPN.  WireGuard is designed as a
 general purpose VPN for running on embedded interfaces and super computers
 alike, fit for many different circumstances. It uses UDP.

Package: wireless-regdb
Version: 2020.04.29-1
Depends: libc
Section: firmware
Architecture: all
Installed-Size: 1861
Filename: wireless-regdb_2020.04.29-1_all.ipk
Size: 2574
SHA256sum:ee682df4567710b534bd25015e80af49df9ce93245bffe18d1aef7c5e216e98f
Description:  Wireless Regulatory Database

Package: wireless-tools
Version: 29-6
Depends: libc
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 23147
Filename: wireless-tools_29-6_mipsel_mips32.ipk
Size: 23888
SHA256sum:7350eca96bbaa237dba3430da95217dcd2cee6ec12daec4c9321279b1ad22d85
Description:  This package contains a collection of tools for configuring wireless
 adapters implementing the "Linux Wireless Extensions".

Package: wl12xx-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 1175080
Filename: wl12xx-firmware_20200619-1_mipsel_mips32.ipk
Size: 1175069
SHA256sum:4ca12330fe52ce96bceefe01ff8157929fb1f2491775fb6fe965cc008036293b
Description:  TI WL12xx firmware

Package: wl18xx-firmware
Version: 20200619-1
Depends: libc
Section: firmware
Architecture: mipsel_mips32
Installed-Size: 342254
Filename: wl18xx-firmware_20200619-1_mipsel_mips32.ipk
Size: 342694
SHA256sum:6821f1616f3ebc42a0fbae94311b3c8b224ae1faa31a7f921028678f0d0b2fcc
Description:  TI WL18xx firmware

Package: wpa-cli
Version: 2020-06-08-5a8b3662-2
Depends: libc
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 28716
Filename: wpa-cli_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 29451
SHA256sum:b615da4ac2a63343cca078f5685db5e616b431bdf9a5e0936b4baa2243c8a4de
Description:  WPA Supplicant command line control utility

Package: wpa-supplicant-basic
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant, wpa-supplicant-mesh-openssl, wpa-supplicant-mesh-wolfssl
Provides: wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 235695
Filename: wpa-supplicant-basic_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 236001
SHA256sum:25f106f6011330031a8f7250e6332257ed5a6655eaa18219ab202a85967b32b2
Description:  WPA Supplicant (with 11r and 11w)

Package: wpa-supplicant-mesh-openssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libopenssl1.1
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant
Provides: wpa-supplicant, wpa-supplicant-mesh
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 498507
Filename: wpa-supplicant-mesh-openssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 498257
SHA256sum:d4f752f1eedbed94585f4cca097f616cc227be77787b0d4eff70f0d5073f09d1
Description:  WPA Supplicant (with 802.11s and SAE)

Package: wpa-supplicant-mesh-wolfssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libwolfssl24
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant, wpa-supplicant-mesh-openssl
Provides: wpa-supplicant, wpa-supplicant-mesh
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 495061
Filename: wpa-supplicant-mesh-wolfssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 494821
SHA256sum:1ac698389dbf9b3840d5fac1eea38436b49272f3bfb0b9df40147172dafd0aa6
Description:  WPA Supplicant (with 802.11s and SAE)

Package: wpa-supplicant-mini
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant, wpa-supplicant-mesh-openssl, wpa-supplicant-mesh-wolfssl, wpa-supplicant-basic
Provides: wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 225482
Filename: wpa-supplicant-mini_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 225765
SHA256sum:1798765c53cf8e1c3b60031b85aa11c7d8497e54eefd66710a19ce0113ebeeab
Description:  WPA Supplicant (minimal version)

Package: wpa-supplicant-openssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libopenssl1.1
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant, wpa-supplicant-mesh-openssl, wpa-supplicant-mesh-wolfssl, wpa-supplicant-basic, wpa-supplicant-mini, wpa-supplicant-p2p
Provides: wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 506219
Filename: wpa-supplicant-openssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 505772
SHA256sum:92d8cc3a67c5ee1b9c817976825ea5c1b6718ff69a6017e1759d76e8cfa075fd
Description:  WPA Supplicant

Package: wpa-supplicant-p2p
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant, wpa-supplicant-mesh-openssl, wpa-supplicant-mesh-wolfssl, wpa-supplicant-basic, wpa-supplicant-mini
Provides: wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 599949
Filename: wpa-supplicant-p2p_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 599577
SHA256sum:5e9b94168ad68b7c1058e636a3703668fec54c8ba7e12a999b135a8e350e5a44
Description:  WPA Supplicant (with Wi-Fi P2P support)

Package: wpa-supplicant-wolfssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libwolfssl24
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl, wpa-supplicant, wpa-supplicant-mesh-openssl, wpa-supplicant-mesh-wolfssl, wpa-supplicant-basic, wpa-supplicant-mini, wpa-supplicant-p2p, wpa-supplicant-openssl
Provides: wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 502796
Filename: wpa-supplicant-wolfssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 502719
SHA256sum:bc7a104e3dcfcf041db66ca76924dbb768ff438cde9fda97fc22eafb71f9617b
Description:  WPA Supplicant

Package: wpa-supplicant
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad-wolfssl
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 399556
Filename: wpa-supplicant_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 399450
SHA256sum:2eebeb5c4d7cac47b031e88eb99a6c180fec58bbd72b80946f7548c1930fd39e
Description:  WPA Supplicant

Package: wpad-basic
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl
Provides: hostapd, wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 394256
Filename: wpad-basic_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 394579
SHA256sum:7a3fff531daebe37a716a936e1c63f8de7353b280a578b2dbee4ff251d2940df
Description:  This package contains a basic IEEE 802.1x/WPA Authenticator and Supplicant with WPA-PSK, 802.11r and 802.11w support.

Package: wpad-mesh-openssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libopenssl1.1
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl, wpad, wpad
Provides: hostapd, wpa-supplicant, wpa-supplicant-mesh, wpad-mesh
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 616280
Filename: wpad-mesh-openssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 615905
SHA256sum:a61135b4e9ed838f4b784aa4d5911748d8a24e7ef9b370700fdc5805735c5d81
Description:  This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).

Package: wpad-mesh-wolfssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libwolfssl24
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl, wpad, wpad-mesh-openssl, wpad, wpad-mesh-openssl
Provides: hostapd, wpa-supplicant, wpa-supplicant-mesh, wpad-mesh
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 613501
Filename: wpad-mesh-wolfssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 613088
SHA256sum:3cde26dde2460ec497cd5321895a89a2092b44fb1fef190e69f15fafceae8370
Description:  This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support).

Package: wpad-mini
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic
Provides: hostapd, wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 359014
Filename: wpad-mini_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 359355
SHA256sum:1b1779a67ceeb4c4135ce06f6642fdcc62bf2f28594651e283df63cbb0b59ced
Description:  This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).

Package: wpad-openssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libopenssl1.1
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini
Provides: hostapd, wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 625413
Filename: wpad-openssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 624876
SHA256sum:dba784dd3b994a0cb04ebdc6aaeff6e05f2937d2342723517c56f64ccae186a2
Description:  This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
 Authenticator and Supplicant

Package: wpad-wolfssl
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227, libwolfssl24
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl, wpad, wpad-mesh-openssl, wpad-mesh-wolfssl, wpad-basic, wpad-mini, wpad-openssl
Provides: hostapd, wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 622607
Filename: wpad-wolfssl_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 622145
SHA256sum:4df0a25eead17fd0cdb22546fbfba174f3232f2e0dca5f0d0c9dc4e21a5f810d
Description:  This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
 Authenticator and Supplicant

Package: wpad
Version: 2020-06-08-5a8b3662-2
Depends: libc, libnl-tiny, hostapd-common, libubus20191227
Conflicts: hostapd, hostapd-basic, hostapd-mini, hostapd-openssl, hostapd-wolfssl
Provides: hostapd, wpa-supplicant
License: BSD-3-Clause
Section: net
CPE-ID: cpe:/a:w1.fi:hostapd
Architecture: mipsel_mips32
Installed-Size: 620515
Filename: wpad_2020-06-08-5a8b3662-2_mipsel_mips32.ipk
Size: 620223
SHA256sum:8baa955b2bf46989e615cc2280e49b8bdb847818c521353044004cf176bf7a91
Description:  This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
 Authenticator and Supplicant

Package: wpan-tools
Version: 0.7
Depends: libc, libnl200
Section: net
Architecture: mipsel_mips32
Installed-Size: 13828
Filename: wpan-tools_0.7_mipsel_mips32.ipk
Size: 14439
SHA256sum:af227606bb643fb4e021c2c9f06e997571d5253954b484bdd9e85f1fa17ef30c
Description:  cfg802154 interface configuration utility

Package: wwan
Version: 2019-04-29-5
Depends: libc
License: GPL-2.0
Section: net
Architecture: mipsel_mips32
Installed-Size: 9992
Filename: wwan_2019-04-29-5_mipsel_mips32.ipk
Size: 9765
SHA256sum:0336614382815f2eee4554f444a078ae93002affa2c1e25935f32b61f88c78f1
Description:  Generic OpenWrt 3G/4G proto handler

Package: xfrm
Version: 2
Depends: libc, kmod-xfrm-interface
License: GPL-2.0
Section: net
Architecture: all
Installed-Size: 708
Filename: xfrm_2_all.ipk
Size: 1459
SHA256sum:885aec129b83adc5a680cc4c95d21fa49e8ce75d455dca7eb1b95de9003d112b
Description:  XFRM IPsec Tunnel Interface config support (IPv4 and IPv6) in /etc/config/network.

Package: zlib-dev
Version: 1.2.11-3
Depends: libc, zlib
License: Zlib
Section: devel
CPE-ID: cpe:/a:gnu:zlib
Architecture: mipsel_mips32
Installed-Size: 82988
Filename: zlib-dev_1.2.11-3_mipsel_mips32.ipk
Size: 83771
SHA256sum:e49432234a6ec980d425035ef973e2538d6cb88a9bee79e301a1f21f4a6e3466
Description:  zlib is a lossless data-compression library.
 This package includes the development support files.

Package: zlib
Version: 1.2.11-3
Depends: libc
License: Zlib
Section: libs
CPE-ID: cpe:/a:gnu:zlib
Architecture: mipsel_mips32
Installed-Size: 42529
Filename: zlib_1.2.11-3_mipsel_mips32.ipk
Size: 43245
SHA256sum:c716db91481250a51e42b020c7bede077c87f90a96dc0211884cb69e2ea1803e
Description:  zlib is a lossless data-compression library.
 This package includes the shared library.

Package: zram-swap
Version: 5
Depends: libc, kmod-zram, swap-utils
Section: utils
Architecture: all
Installed-Size: 2169
Filename: zram-swap_5_all.ipk
Size: 2927
SHA256sum:f108a400afe47a2df4dad2a482ecd627eacc3604c8ff09ff9f5c2715e95a23ba
Description:  A script to activate swaping on a compressed zram partition. This 
 could be used to increase the available memory, by using compressed 
 memory.